[PATCH v4 2/5] drm: panel: simple: Defer unprepare delay till next prepare to shorten it
Douglas Anderson
dianders at chromium.org
Tue Nov 10 01:00:56 UTC 2020
It is believed that all of the current users of the "unprepare" delay
don't actually need to wait the amount of time specified directly in
the unprepare phase. The purpose of the delay that's specified is to
allow the panel to fully power off so that we don't try to power it
back on before it's managed to full power down.
Let's use this observation to avoid the fixed delay that we currently
have. Instead of delaying, we'll note the current time when the
unprepare happens. If someone then tries to prepare the panel later
and not enough time has passed, we'll do the delay before starting the
prepare phase.
Signed-off-by: Douglas Anderson <dianders at chromium.org>
---
Changes in v4:
- Split ("Allow timing constraints, not fixed delays") into 2 patches.
- Reuse the existing "unprepare" and assume it means "unprepare_to_prepare".
- Shortened function name to panel_simple_wait().
- Change to fix kerneldoc is now patch #1 in the series.
drivers/gpu/drm/panel/panel-simple.c | 27 ++++++++++++++++++++++++---
1 file changed, 24 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 813c90274631..4bc61d71f068 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -115,6 +115,11 @@ struct panel_desc {
*
* The time (in milliseconds) that it takes for the panel
* to power itself down completely.
+ *
+ * This time is used to prevent a future "prepare" from
+ * starting until at least this many milliseconds has passed.
+ * If at prepare time less time has passed since unprepare
+ * finished, the driver waits for the remaining time.
*/
unsigned int unprepare;
} delay;
@@ -130,6 +135,8 @@ struct panel_simple {
bool enabled;
bool no_hpd;
+ ktime_t unprepared_time;
+
const struct panel_desc *desc;
struct regulator *supply;
@@ -257,6 +264,20 @@ static int panel_simple_get_non_edid_modes(struct panel_simple *panel,
return num;
}
+static void panel_simple_wait(ktime_t start_ktime, unsigned int min_ms)
+{
+ ktime_t now_ktime, min_ktime;
+
+ if (!min_ms)
+ return;
+
+ min_ktime = ktime_add(start_ktime, ms_to_ktime(min_ms));
+ now_ktime = ktime_get();
+
+ if (ktime_before(now_ktime, min_ktime))
+ msleep(ktime_to_ms(ktime_sub(min_ktime, now_ktime)) + 1);
+}
+
static int panel_simple_disable(struct drm_panel *panel)
{
struct panel_simple *p = to_panel_simple(panel);
@@ -283,10 +304,8 @@ static int panel_simple_unprepare(struct drm_panel *panel)
regulator_disable(p->supply);
- if (p->desc->delay.unprepare)
- msleep(p->desc->delay.unprepare);
-
p->prepared = false;
+ p->unprepared_time = ktime_get();
return 0;
}
@@ -326,6 +345,8 @@ static int panel_simple_prepare(struct drm_panel *panel)
if (p->prepared)
return 0;
+ panel_simple_wait(p->unprepared_time, p->desc->delay.unprepare);
+
err = regulator_enable(p->supply);
if (err < 0) {
dev_err(panel->dev, "failed to enable supply: %d\n", err);
--
2.29.2.222.g5d2a92d10f8-goog
More information about the dri-devel
mailing list