[PATCH v8 02/26] memory: tegra20-emc: Use dev_pm_opp_set_clkname()

[Viresh Kumar]

On 11-11-20, 04:14, Dmitry Osipenko wrote:
> The dev_pm_opp_get_opp_table() shouldn't be used by drivers, use
> dev_pm_opp_set_clkname() instead.
> 
> Suggested-by: Viresh Kumar <viresh.kumar at linaro.org>
> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
> ---
>  drivers/memory/tegra/tegra20-emc.c | 30 +++++++++++++++++++-----------
>  1 file changed, 19 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c
> index 5e10aa97809f..bb3f315c9587 100644
> --- a/drivers/memory/tegra/tegra20-emc.c
> +++ b/drivers/memory/tegra/tegra20-emc.c
> @@ -902,7 +902,7 @@ static int tegra_emc_interconnect_init(struct tegra_emc *emc)
>  
>  static int tegra_emc_opp_table_init(struct tegra_emc *emc)
>  {
> -	struct opp_table *opp_table;
> +	struct opp_table *reg_opp_table = NULL, *clk_opp_table;
>  	const char *rname = "core";
>  	int err;
>  
> @@ -917,19 +917,24 @@ static int tegra_emc_opp_table_init(struct tegra_emc *emc)
>  	}
>  
>  	/* voltage scaling is optional */
> -	if (device_property_present(emc->dev, "core-supply"))
> -		opp_table = dev_pm_opp_set_regulators(emc->dev, &rname, 1);
> -	else
> -		opp_table = dev_pm_opp_get_opp_table(emc->dev);
> +	if (device_property_present(emc->dev, "core-supply")) {
> +		reg_opp_table = dev_pm_opp_set_regulators(emc->dev, &rname, 1);
> +		if (IS_ERR(reg_opp_table))
> +			return dev_err_probe(emc->dev, PTR_ERR(reg_opp_table),
> +					     "failed to set OPP regulator\n");
> +	}
>  
> -	if (IS_ERR(opp_table))
> -		return dev_err_probe(emc->dev, PTR_ERR(opp_table),
> -				     "failed to prepare OPP table\n");
> +	clk_opp_table = dev_pm_opp_set_clkname(emc->dev, NULL);
> +	err = PTR_ERR_OR_ZERO(clk_opp_table);

Don't check for NULL here.

> +	if (err) {
> +		dev_err(emc->dev, "failed to set OPP clk: %d\n", err);
> +		goto put_reg_table;
> +	}
>  
>  	err = dev_pm_opp_of_add_table(emc->dev);
>  	if (err) {
>  		dev_err(emc->dev, "failed to add OPP table: %d\n", err);
> -		goto put_table;
> +		goto put_clk_table;
>  	}
>  
>  	dev_info(emc->dev, "current clock rate %lu MHz\n",
> @@ -946,8 +951,11 @@ static int tegra_emc_opp_table_init(struct tegra_emc *emc)
>  
>  remove_table:
>  	dev_pm_opp_of_remove_table(emc->dev);
> -put_table:
> -	dev_pm_opp_put_regulators(opp_table);
> +put_clk_table:
> +	dev_pm_opp_put_clkname(clk_opp_table);
> +put_reg_table:
> +	if (reg_opp_table)

This won't be required after my other patchset and yeah it is a
classic chicken and egg problem we have here :)

Maybe you can fix them separately in 5.11 after everything is applied.

> +		dev_pm_opp_put_regulators(reg_opp_table);
>  
>  	return err;
>  }
> -- 
> 2.29.2

-- 
viresh