[PATCH] drm/bridge: anx7625: Add anx7625 port switching.

[Prashant Malani]

On Thu, Nov 12, 2020 at 05:07:05PM +0800, Pi-Hsun Shih wrote:
> Hi Prashant,
> 
> Please see inline reply as below.
> 
> On Thu, Nov 12, 2020 at 4:59 PM Prashant Malani <pmalani at chromium.org> wrote:
> >
> > Hi Pi-Hsun,
> >
> > I haven't gone through the code, but did have a high-level comment
> > (kindly see inline)
> >
> > On Thu, Nov 12, 2020 at 02:40:40PM +0800, Pi-Hsun Shih wrote:
> > > When output 2 lanes DP data, anx7625 can output to either TX1/RX1 or
> > > TX2/RX2. In typical usage, these two TX/RX pairs corresponds to two
> > > orientations of typec.
> > >
> > > On some board one anx7625 is used as DPI to DP converter for two typec
> > > ports. In this case, the TX1/RX1 and TX2/RX2 are connected to two usb
> > > muxes, which mux the DP data with the rest of the USB3 data, and
> > > connects to the two typec ports.
> > >
> > > This patch adds option for anx7625 to acts as a usb typec switch and
> > > switch output lanes based on the typec orientation, or acts as two usb
> > > typec mux and switch output lanes depending on whether the two ports
> > > currently has DP enabled.
> > >
> > > Signed-off-by: Pi-Hsun Shih <pihsun at chromium.org>
> > >
> > > ====================================================================
> > >
> > > This is an attempt to use typec framework with how we're using anx7625
> > > on Chrome OS asurada board.
> > >
> > > An example of the dts for the two ports case can be found at
> > > https://crrev.com/c/2507199/6
> >
> > Do you plan on submitting DT schemas & bindings documentation for the switch(es)
> > that are intended to be used?
> 
> Yes I plan to submit corresponding DT schemas & bindings documentation
> changes if this change looks good.
> 

That's great. Thanks for confirming :)


BR,

-Prashant