[PATCH v3 4/6] drm/tidss: Set bus_format correctly from bridge/connector

[Nikhil Devshatwar]

Remove the old code to iterate over the bridge chain, as this is
already done by the framework.
The bridge state should have the negotiated bus format and flags.
Use these from the bridge's state.
If the bridge does not support format negotiation, error out
and fail.

Signed-off-by: Nikhil Devshatwar <nikhil.nd at ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---

Notes:
    changes from v2:
    * Remove the old code and use the flags from the bridge state

 drivers/gpu/drm/tidss/tidss_encoder.c | 36 +++++++++++----------------
 1 file changed, 14 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/tidss/tidss_encoder.c b/drivers/gpu/drm/tidss/tidss_encoder.c
index e278a9c89476..08d5083c5508 100644
--- a/drivers/gpu/drm/tidss/tidss_encoder.c
+++ b/drivers/gpu/drm/tidss/tidss_encoder.c
@@ -21,37 +21,29 @@ static int tidss_encoder_atomic_check(struct drm_encoder *encoder,
 {
 	struct drm_device *ddev = encoder->dev;
 	struct tidss_crtc_state *tcrtc_state = to_tidss_crtc_state(crtc_state);
-	struct drm_display_info *di = &conn_state->connector->display_info;
+	struct drm_bridge_state *bstate;
 	struct drm_bridge *bridge;
-	bool bus_flags_set = false;
 
 	dev_dbg(ddev->dev, "%s\n", __func__);
 
-	/*
-	 * Take the bus_flags from the first bridge that defines
-	 * bridge timings, or from the connector's display_info if no
-	 * bridge defines the timings.
-	 */
-	drm_for_each_bridge_in_chain(encoder, bridge) {
-		if (!bridge->timings)
-			continue;
-
-		tcrtc_state->bus_flags = bridge->timings->input_bus_flags;
-		bus_flags_set = true;
-		break;
+	/* Copy the bus_format and flags from the first bridge's state */
+	bridge = drm_bridge_chain_get_first_bridge(encoder);
+	bstate = drm_atomic_get_new_bridge_state(crtc_state->state, bridge);
+	if (bstate) {
+		tcrtc_state->bus_format = bstate->input_bus_cfg.format;
+		tcrtc_state->bus_flags = bstate->input_bus_cfg.flags;
+	} else {
+		dev_err(ddev->dev, "Could not get the bridge state\n");
+		return -EINVAL;
 	}
 
-	if (!di->bus_formats || di->num_bus_formats == 0)  {
-		dev_err(ddev->dev, "%s: No bus_formats in connected display\n",
-			__func__);
+	if (tcrtc_state->bus_format == 0 ||
+	    tcrtc_state->bus_format == MEDIA_BUS_FMT_FIXED) {
+
+		dev_err(ddev->dev, "Bridge connected to the encoder did not specify media bus format\n");
 		return -EINVAL;
 	}
 
-	// XXX any cleaner way to set bus format and flags?
-	tcrtc_state->bus_format = di->bus_formats[0];
-	if (!bus_flags_set)
-		tcrtc_state->bus_flags = di->bus_flags;
-
 	return 0;
 }
 
-- 
2.17.1