next/master bisection: baseline.dmesg.emerg on meson-gxbb-p200

Marc Zyngier maz at kernel.org
Thu Nov 19 18:35:04 UTC 2020


On 2020-11-19 18:13, Jerome Brunet wrote:
> On Thu 19 Nov 2020 at 19:04, Guillaume Tucker
> <guillaume.tucker at collabora.com> wrote:
> 
>> Hi Marc,
>> 
>> On 19/11/2020 11:58, Marc Zyngier wrote:
>>> On 2020-11-19 10:26, Neil Armstrong wrote:
>>>> On 19/11/2020 11:20, Marc Zyngier wrote:
>>>>> On 2020-11-19 08:50, Guillaume Tucker wrote:
>>>>>> Please see the automated bisection report below about some kernel
>>>>>> errors on meson-gxbb-p200.
>>>>>> 
>>>>>> Reports aren't automatically sent to the public while we're
>>>>>> trialing new bisection features on kernelci.org, however this one
>>>>>> looks valid.
>>>>>> 
>>>>>> The bisection started with next-20201118 but the errors are still
>>>>>> present in next-20201119.  Details for this regression:
>>>>>> 
>>>>>>   https://kernelci.org/test/case/id/5fb6196bfd0127fd68d8d902/
>>>>>> 
>>>>>> The first error is:
>>>>>> 
>>>>>>   [   14.757489] Internal error: synchronous external abort: 
>>>>>> 96000210
>>>>>> [#1] PREEMPT SMP
>>>>> 
>>>>> Looks like yet another clock ordering setup. I guess different 
>>>>> Amlogic
>>>>> platforms have slightly different ordering requirements.
>>>>> 
>>>>> Neil, do you have any idea of which platform requires which 
>>>>> ordering?
>>>>> The variability in DT and platforms is pretty difficult to follow 
>>>>> (and
>>>>> I don't think I have such board around).
>>>> 
>>>> The requirements should be the same, here the init was done before 
>>>> calling
>>>> dw_hdmi_probe to be sure the clocks and internals resets were 
>>>> deasserted.
>>>> But since you boot from u-boot already enabling these, it's already 
>>>> active.
>>>> 
>>>> The solution would be to revert and do some check in 
>>>> meson_dw_hdmi_init() to
>>>> check if already enabled and do nothing.
>>> 
>>> A better fix seems to be this, which makes it explicit that there is
>>> a dependency between some of the registers accessed from 
>>> meson_dw_hdmi_init()
>>> and the iahb clock.
>>> 
>>> Guillaume, can you give this a go on your failing box?
>> 
>> I confirm it solves the problem.  Please add this to your fix
>> patch if it's OK with you:
>> 
>>   Reported-by: "kernelci.org bot" <bot at kernelci.org>
>>   Tested-by: Guillaume Tucker <guillaume.tucker at collabora.com>
>> 
>> 
>> For the record, it passed all the tests when applied on top of
>> the "bad" revision found by the bisection:
>> 
>>   
>> http://lava.baylibre.com:10080/scheduler/alljobs?search=v5.10-rc3-1021-gb8668a2e5ea1
>> 
>> and the exact same test on the "bad" revision without the fix
>> consistently showed the error:
>> 
>>   http://lava.baylibre.com:10080/scheduler/job/374176
>> 
>> 
>> Thanks,
>> Guillaume
>> 
>> 
>>> diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c 
>>> b/drivers/gpu/drm/meson/meson_dw_hdmi.c
>>> index 7f8eea494147..52af8ba94311 100644
>>> --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c
>>> +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c
>>> @@ -146,6 +146,7 @@ struct meson_dw_hdmi {
>>>      struct reset_control *hdmitx_ctrl;
>>>      struct reset_control *hdmitx_phy;
>>>      struct clk *hdmi_pclk;
>>> +    struct clk *iahb_clk;
>>>      struct clk *venci_clk;
>>>      struct regulator *hdmi_supply;
>>>      u32 irq_stat;
>>> @@ -1033,6 +1034,13 @@ static int meson_dw_hdmi_bind(struct device 
>>> *dev, struct device *master,
>>>      }
>>>      clk_prepare_enable(meson_dw_hdmi->hdmi_pclk);
>>> 
>>> +    meson_dw_hdmi->iahb_clk = devm_clk_get(dev, "iahb");
>>> +    if (IS_ERR(meson_dw_hdmi->iahb_clk)) {
>>> +        dev_err(dev, "Unable to get iahb clk\n");
>>> +        return PTR_ERR(meson_dw_hdmi->iahb_clk);
>>> +    }
>>> +    clk_prepare_enable(meson_dw_hdmi->iahb_clk);
> 
> If you guys are going ahead with this fix, this call to
> clk_prepare_enable() needs to be balanced with clk_disable_unprepare() 
> somehow

Yup, good point.

Although this driver *never* disables any clock it enables, and leaves 
it
to the main DW driver, which I guess makes it leak references.

So all 3 clocks need fixing.

Thanks,

         M.
-- 
Jazz is not dead. It just smells funny...


More information about the dri-devel mailing list