[PATCH 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies

[Rob Herring]

On Thu, Nov 12, 2020 at 04:37:03PM +0800, Hsin-Yi Wang wrote:
> anx7625 requires 3 power supply regulators.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi at chromium.org>
> ---
>  .../display/bridge/analogix,anx7625.yaml       | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> index 60585a4fc22b..1aa08f10d894 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -34,6 +34,18 @@ properties:
>      description: used for reset chip control, RESET_N pin B7.
>      maxItems: 1
>  
> +  vdd10-supply:
> +    description: Regulator that provides the supply 1.0V power.
> +    maxItems: 1
> +
> +  vdd18-supply:
> +    description: Regulator that provides the supply 1.8V power.
> +    maxItems: 1
> +
> +  vdd33-supply:
> +    description: Regulator that provides the supply 3.3V power.
> +    maxItems: 1

Supplies are always a single item, so you can drop maxItems.

> +
>    ports:
>      type: object
>  
> @@ -55,6 +67,9 @@ properties:
>  required:
>    - compatible
>    - reg
> +  - vdd10-supply
> +  - vdd18-supply
> +  - vdd33-supply
>    - ports
>  
>  additionalProperties: false
> @@ -72,6 +87,9 @@ examples:
>              reg = <0x58>;
>              enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
>              reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> +            vdd10-supply = <&pp1000_mipibrdg>;
> +            vdd18-supply = <&pp1800_mipibrdg>;
> +            vdd33-supply = <&pp3300_mipibrdg>;
>  
>              ports {
>                  #address-cells = <1>;
> -- 
> 2.29.2.222.g5d2a92d10f8-goog
>