[PATCH v10 13/19] ARM: tegra: Add interconnect properties to Tegra20 device-tree

[Dmitry Osipenko]

Add interconnect properties to the Memory Controller, External Memory
Controller and the Display Controller nodes in order to describe hardware
interconnection.

Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
---
 arch/arm/boot/dts/tegra20.dtsi | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 9347f7789245..2e1304493f7d 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -111,6 +111,17 @@ dc at 54200000 {
 
 			nvidia,head = <0>;
 
+			interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
+					<&mc TEGRA20_MC_DISPLAY0B &emc>,
+					<&mc TEGRA20_MC_DISPLAY1B &emc>,
+					<&mc TEGRA20_MC_DISPLAY0C &emc>,
+					<&mc TEGRA20_MC_DISPLAYHC &emc>;
+			interconnect-names = "wina",
+					     "winb",
+					     "winb-vfilter",
+					     "winc",
+					     "cursor";
+
 			rgb {
 				status = "disabled";
 			};
@@ -128,6 +139,17 @@ dc at 54240000 {
 
 			nvidia,head = <1>;
 
+			interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
+					<&mc TEGRA20_MC_DISPLAY0BB &emc>,
+					<&mc TEGRA20_MC_DISPLAY1BB &emc>,
+					<&mc TEGRA20_MC_DISPLAY0CB &emc>,
+					<&mc TEGRA20_MC_DISPLAYHCB &emc>;
+			interconnect-names = "wina",
+					     "winb",
+					     "winb-vfilter",
+					     "winc",
+					     "cursor";
+
 			rgb {
 				status = "disabled";
 			};
@@ -630,15 +652,17 @@ mc: memory-controller at 7000f000 {
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		#reset-cells = <1>;
 		#iommu-cells = <0>;
+		#interconnect-cells = <1>;
 	};
 
-	memory-controller at 7000f400 {
+	emc: memory-controller at 7000f400 {
 		compatible = "nvidia,tegra20-emc";
 		reg = <0x7000f400 0x400>;
 		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_EMC>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		#interconnect-cells = <0>;
 	};
 
 	fuse at 7000f800 {
-- 
2.29.2