[PATCH 23/40] drm/amd/pm/powerplay/hwmgr/smu7_thermal: Repair formatting in a bunch of function docs
Lee Jones
lee.jones at linaro.org
Thu Nov 26 13:42:23 UTC 2020
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:112: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_static_mode'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:112: warning: Function parameter or member 'mode' not described in 'smu7_fan_ctrl_set_static_mode'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:137: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_default_mode'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:209: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_fan_speed_percent'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:209: warning: Function parameter or member 'speed' not described in 'smu7_fan_ctrl_set_fan_speed_percent'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:245: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_reset_fan_speed_to_default'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:268: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_fan_speed_rpm'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:268: warning: Function parameter or member 'speed' not described in 'smu7_fan_ctrl_set_fan_speed_rpm'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:299: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_get_temperature'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:325: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_set_temperature_range'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:325: warning: Function parameter or member 'low_temp' not described in 'smu7_thermal_set_temperature_range'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:325: warning: Function parameter or member 'high_temp' not described in 'smu7_thermal_set_temperature_range'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:358: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_initialize'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:377: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_enable_alert'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:395: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_disable_alert'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:414: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_stop_thermal_controller'
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:433: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_start_smc_fan_control'
Cc: Evan Quan <evan.quan at amd.com>
Cc: Alex Deucher <alexander.deucher at amd.com>
Cc: "Christian König" <christian.koenig at amd.com>
Cc: David Airlie <airlied at linux.ie>
Cc: Daniel Vetter <daniel at ffwll.ch>
Cc: amd-gfx at lists.freedesktop.org
Cc: dri-devel at lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
.../drm/amd/pm/powerplay/hwmgr/smu7_thermal.c | 103 +++++++++---------
1 file changed, 50 insertions(+), 53 deletions(-)
diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c
index e3d9d969d86ac..0d38d4206848a 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c
@@ -103,11 +103,11 @@ int smu7_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed)
}
/**
-* Set Fan Speed Control to static mode, so that the user can decide what speed to use.
-* @param hwmgr the address of the powerplay hardware manager.
-* mode the fan control mode, 0 default, 1 by percent, 5, by RPM
-* @exception Should always succeed.
-*/
+ * smu7_fan_ctrl_set_static_mode - Set Fan Speed Control to static mode, so that the user can decide what speed to use.
+ * @hwmgr: the address of the powerplay hardware manager.
+ * @mode: the fan control mode, 0 default, 1 by percent, 5, by RPM
+ * Exception: Should always succeed.
+ */
int smu7_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
{
if (hwmgr->fan_ctrl_is_in_default_mode) {
@@ -130,8 +130,8 @@ int smu7_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
/**
* Reset Fan Speed Control to default mode.
-* @param hwmgr the address of the powerplay hardware manager.
-* @exception Should always succeed.
+* @hwmgr: the address of the powerplay hardware manager.
+* Exception: Should always succeed.
*/
int smu7_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr)
{
@@ -199,11 +199,11 @@ int smu7_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr)
}
/**
-* Set Fan Speed in percent.
-* @param hwmgr the address of the powerplay hardware manager.
-* @param speed is the percentage value (0% - 100%) to be set.
-* @exception Fails is the 100% setting appears to be 0.
-*/
+ * smu7_fan_ctrl_set_fan_speed_percent - Set Fan Speed in percent.
+ * @hwmgr: the address of the powerplay hardware manager.
+ * @speed: is the percentage value (0% - 100%) to be set.
+ * Exception: Fails is the 100% setting appears to be 0.
+ */
int smu7_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr,
uint32_t speed)
{
@@ -237,9 +237,9 @@ int smu7_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr,
}
/**
-* Reset Fan Speed to default.
-* @param hwmgr the address of the powerplay hardware manager.
-* @exception Always succeeds.
+* smu7_fan_ctrl_reset_fan_speed_to_default - Reset Fan Speed to default.
+* @hwmgr: the address of the powerplay hardware manager.
+* Exception: Always succeeds.
*/
int smu7_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
{
@@ -259,11 +259,11 @@ int smu7_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
}
/**
-* Set Fan Speed in RPM.
-* @param hwmgr the address of the powerplay hardware manager.
-* @param speed is the percentage value (min - max) to be set.
-* @exception Fails is the speed not lie between min and max.
-*/
+ * smu7_fan_ctrl_set_fan_speed_rpm - Set Fan Speed in RPM.
+ * @hwmgr: the address of the powerplay hardware manager.
+ * @speed: is the percentage value (min - max) to be set.
+ * Exception: Fails is the speed not lie between min and max.
+ */
int smu7_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
{
uint32_t tach_period;
@@ -291,10 +291,10 @@ int smu7_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
}
/**
-* Reads the remote temperature from the SIslands thermal controller.
-*
-* @param hwmgr The address of the hardware manager.
-*/
+ * smu7_thermal_get_temperature - Reads the remote temperature from the SIslands thermal controller.
+ *
+ * @hwmgr: The address of the hardware manager.
+ */
int smu7_thermal_get_temperature(struct pp_hwmgr *hwmgr)
{
int temp;
@@ -314,12 +314,13 @@ int smu7_thermal_get_temperature(struct pp_hwmgr *hwmgr)
}
/**
-* Set the requested temperature range for high and low alert signals
-*
-* @param hwmgr The address of the hardware manager.
-* @param range Temperature range to be programmed for high and low alert signals
-* @exception PP_Result_BadInput if the input data is not valid.
-*/
+ * smu7_thermal_set_temperature_range - Set the requested temperature range for high and low alert signals
+ *
+ * @hwmgr: The address of the hardware manager.
+ * @low_temp: Temperature to be programmed for high alert signals
+ * @high_temp: Temperature to be programmed for low alert signals
+ * Exception: PP_Result_BadInput if the input data is not valid.
+ */
static int smu7_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
int low_temp, int high_temp)
{
@@ -350,10 +351,10 @@ static int smu7_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
}
/**
-* Programs thermal controller one-time setting registers
-*
-* @param hwmgr The address of the hardware manager.
-*/
+ * smu7_thermal_initialize - Programs thermal controller one-time setting registers
+ *
+ * @hwmgr: The address of the hardware manager.
+ */
static int smu7_thermal_initialize(struct pp_hwmgr *hwmgr)
{
if (hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution)
@@ -369,10 +370,10 @@ static int smu7_thermal_initialize(struct pp_hwmgr *hwmgr)
}
/**
-* Enable thermal alerts on the RV770 thermal controller.
-*
-* @param hwmgr The address of the hardware manager.
-*/
+ * smu7_thermal_enable_alert - Enable thermal alerts on the RV770 thermal controller.
+ *
+ * @hwmgr: The address of the hardware manager.
+ */
static void smu7_thermal_enable_alert(struct pp_hwmgr *hwmgr)
{
uint32_t alert;
@@ -388,9 +389,9 @@ static void smu7_thermal_enable_alert(struct pp_hwmgr *hwmgr)
}
/**
-* Disable thermal alerts on the RV770 thermal controller.
-* @param hwmgr The address of the hardware manager.
-*/
+ * smu7_thermal_disable_alert - Disable thermal alerts on the RV770 thermal controller.
+ * @hwmgr: The address of the hardware manager.
+ */
int smu7_thermal_disable_alert(struct pp_hwmgr *hwmgr)
{
uint32_t alert;
@@ -406,10 +407,10 @@ int smu7_thermal_disable_alert(struct pp_hwmgr *hwmgr)
}
/**
-* Uninitialize the thermal controller.
-* Currently just disables alerts.
-* @param hwmgr The address of the hardware manager.
-*/
+ * smu7_thermal_stop_thermal_controller - Uninitialize the thermal controller.
+ * Currently just disables alerts.
+ * @hwmgr: The address of the hardware manager.
+ */
int smu7_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
{
int result = smu7_thermal_disable_alert(hwmgr);
@@ -421,14 +422,10 @@ int smu7_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
}
/**
-* Start the fan control on the SMC.
-* @param hwmgr the address of the powerplay hardware manager.
-* @param pInput the pointer to input data
-* @param pOutput the pointer to output data
-* @param pStorage the pointer to temporary storage
-* @param Result the last failure code
-* @return result from set temperature range routine
-*/
+ * smu7_thermal_start_smc_fan_control - Start the fan control on the SMC.
+ * @hwmgr: the address of the powerplay hardware manager.
+ * Return: result from set temperature range routine
+ */
static int smu7_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr)
{
/* If the fantable setup has failed we could have disabled
--
2.25.1
More information about the dri-devel
mailing list