[PATCH v6] drm/i915: Init lspcon after HPD in intel_dp_detect()

Ville Syrjälä ville.syrjala at linux.intel.com
Thu Oct 1 16:24:03 UTC 2020


On Wed, Jun 10, 2020 at 03:55:10PM +0800, Kai-Heng Feng wrote:
> On HP 800 G4 DM, if HDMI cable isn't plugged before boot, the HDMI port
> becomes useless and never responds to cable hotplugging:
> [    3.031904] [drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
> [    3.031945] [drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port D
> 
> Seems like the lspcon chip on the system only gets powered after the
> cable is plugged.
> 
> Consilidate lspcon_init() into lspcon_resume() to dynamically init
> lspcon chip, and make HDMI port work.
> 
> Signed-off-by: Kai-Heng Feng <kai.heng.feng at canonical.com>
> ---
> v6:
>  - Rebase on latest for-linux-next.
> 
> v5:
>  - Consolidate lspcon_resume() with lspcon_init().
>  - Move more logic into lspcon code.
> 
> v4:
>  - Trust VBT in intel_infoframe_init().
>  - Init lspcon in intel_dp_detect().
> 
> v3:
>  - Make sure it's handled under long HPD case.
> 
> v2: 
>  - Move lspcon_init() inside of intel_dp_hpd_pulse().

Hoisted the changelog above --- where it belongs in drm land,
amended with
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/203
and pushed the patch to dinq.

Thanks, and sorry for the horrendous latency.

PS. This will cause some headache for Uma's lspcon HDR stuff, but
so be it.

> 
>  drivers/gpu/drm/i915/display/intel_ddi.c    | 19 +------
>  drivers/gpu/drm/i915/display/intel_dp.c     | 10 ++--
>  drivers/gpu/drm/i915/display/intel_hdmi.c   |  3 +-
>  drivers/gpu/drm/i915/display/intel_lspcon.c | 63 ++++++++++++---------
>  drivers/gpu/drm/i915/display/intel_lspcon.h |  3 +-
>  5 files changed, 43 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index aa22465bb56e..af755b1aa24b 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -4805,7 +4805,7 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>  {
>  	struct intel_digital_port *intel_dig_port;
>  	struct intel_encoder *encoder;
> -	bool init_hdmi, init_dp, init_lspcon = false;
> +	bool init_hdmi, init_dp;
>  	enum phy phy = intel_port_to_phy(dev_priv, port);
>  
>  	init_hdmi = intel_bios_port_supports_dvi(dev_priv, port) ||
> @@ -4819,7 +4819,6 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>  		 * is initialized before lspcon.
>  		 */
>  		init_dp = true;
> -		init_lspcon = true;
>  		init_hdmi = false;
>  		drm_dbg_kms(&dev_priv->drm, "VBT says port %c has lspcon\n",
>  			    port_name(port));
> @@ -4904,22 +4903,6 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>  			goto err;
>  	}
>  
> -	if (init_lspcon) {
> -		if (lspcon_init(intel_dig_port))
> -			/* TODO: handle hdmi info frame part */
> -			drm_dbg_kms(&dev_priv->drm,
> -				    "LSPCON init success on port %c\n",
> -				    port_name(port));
> -		else
> -			/*
> -			 * LSPCON init faied, but DP init was success, so
> -			 * lets try to drive as DP++ port.
> -			 */
> -			drm_err(&dev_priv->drm,
> -				"LSPCON init failed on port %c\n",
> -				port_name(port));
> -	}
> -
>  	if (INTEL_GEN(dev_priv) >= 11) {
>  		if (intel_phy_is_tc(dev_priv, phy))
>  			intel_dig_port->connected = intel_tc_port_connected;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index ed9e53c373a7..398a104158a8 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5962,15 +5962,14 @@ static enum drm_connector_status
>  intel_dp_detect_dpcd(struct intel_dp *intel_dp)
>  {
>  	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> -	struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp);
> +	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
>  	u8 *dpcd = intel_dp->dpcd;
>  	u8 type;
>  
>  	if (WARN_ON(intel_dp_is_edp(intel_dp)))
>  		return connector_status_connected;
>  
> -	if (lspcon->active)
> -		lspcon_resume(lspcon);
> +	lspcon_resume(dig_port);
>  
>  	if (!intel_dp_get_dpcd(intel_dp))
>  		return connector_status_disconnected;
> @@ -7056,14 +7055,13 @@ void intel_dp_encoder_reset(struct drm_encoder *encoder)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder->dev);
>  	struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(encoder));
> -	struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp);
> +	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
>  	intel_wakeref_t wakeref;
>  
>  	if (!HAS_DDI(dev_priv))
>  		intel_dp->DP = intel_de_read(dev_priv, intel_dp->output_reg);
>  
> -	if (lspcon->active)
> -		lspcon_resume(lspcon);
> +	lspcon_resume(dig_port);
>  
>  	intel_dp->reset_link_params = true;
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index 010f37240710..643ad2127931 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -3155,7 +3155,8 @@ void intel_infoframe_init(struct intel_digital_port *intel_dig_port)
>  		intel_dig_port->set_infoframes = g4x_set_infoframes;
>  		intel_dig_port->infoframes_enabled = g4x_infoframes_enabled;
>  	} else if (HAS_DDI(dev_priv)) {
> -		if (intel_dig_port->lspcon.active) {
> +		if (intel_bios_is_lspcon_present(dev_priv,
> +						 intel_dig_port->base.port)) {
>  			intel_dig_port->write_infoframe = lspcon_write_infoframe;
>  			intel_dig_port->read_infoframe = lspcon_read_infoframe;
>  			intel_dig_port->set_infoframes = lspcon_set_infoframes;
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
> index 6ff7b226f0a1..e3dde4c25604 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> @@ -525,44 +525,17 @@ u32 lspcon_infoframes_enabled(struct intel_encoder *encoder,
>  	return 0;
>  }
>  
> -void lspcon_resume(struct intel_lspcon *lspcon)
> -{
> -	enum drm_lspcon_mode expected_mode;
> -
> -	if (lspcon_wake_native_aux_ch(lspcon)) {
> -		expected_mode = DRM_LSPCON_MODE_PCON;
> -		lspcon_resume_in_pcon_wa(lspcon);
> -	} else {
> -		expected_mode = DRM_LSPCON_MODE_LS;
> -	}
> -
> -	if (lspcon_wait_mode(lspcon, expected_mode) == DRM_LSPCON_MODE_PCON)
> -		return;
> -
> -	if (lspcon_change_mode(lspcon, DRM_LSPCON_MODE_PCON))
> -		DRM_ERROR("LSPCON resume failed\n");
> -	else
> -		DRM_DEBUG_KMS("LSPCON resume success\n");
> -}
> -
>  void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon)
>  {
>  	lspcon_wait_mode(lspcon, DRM_LSPCON_MODE_PCON);
>  }
>  
> -bool lspcon_init(struct intel_digital_port *intel_dig_port)
> +static bool lspcon_init(struct intel_digital_port *intel_dig_port)
>  {
>  	struct intel_dp *dp = &intel_dig_port->dp;
>  	struct intel_lspcon *lspcon = &intel_dig_port->lspcon;
> -	struct drm_device *dev = intel_dig_port->base.base.dev;
> -	struct drm_i915_private *dev_priv = to_i915(dev);
>  	struct drm_connector *connector = &dp->attached_connector->base;
>  
> -	if (!HAS_LSPCON(dev_priv)) {
> -		DRM_ERROR("LSPCON is not supported on this platform\n");
> -		return false;
> -	}
> -
>  	lspcon->active = false;
>  	lspcon->mode = DRM_LSPCON_MODE_INVALID;
>  
> @@ -586,3 +559,37 @@ bool lspcon_init(struct intel_digital_port *intel_dig_port)
>  	DRM_DEBUG_KMS("Success: LSPCON init\n");
>  	return true;
>  }
> +
> +void lspcon_resume(struct intel_digital_port *intel_dig_port)
> +{
> +	struct intel_lspcon *lspcon = &intel_dig_port->lspcon;
> +	struct drm_device *dev = intel_dig_port->base.base.dev;
> +	struct drm_i915_private *dev_priv = to_i915(dev);
> +	enum drm_lspcon_mode expected_mode;
> +
> +	if (!intel_bios_is_lspcon_present(dev_priv, intel_dig_port->base.port))
> +		return;
> +
> +	if (!lspcon->active) {
> +		if (!lspcon_init(intel_dig_port)) {
> +			DRM_ERROR("LSPCON init failed on port %c\n",
> +				  port_name(intel_dig_port->base.port));
> +			return;
> +		}
> +	}
> +
> +	if (lspcon_wake_native_aux_ch(lspcon)) {
> +		expected_mode = DRM_LSPCON_MODE_PCON;
> +		lspcon_resume_in_pcon_wa(lspcon);
> +	} else {
> +		expected_mode = DRM_LSPCON_MODE_LS;
> +	}
> +
> +	if (lspcon_wait_mode(lspcon, expected_mode) == DRM_LSPCON_MODE_PCON)
> +		return;
> +
> +	if (lspcon_change_mode(lspcon, DRM_LSPCON_MODE_PCON))
> +		DRM_ERROR("LSPCON resume failed\n");
> +	else
> +		DRM_DEBUG_KMS("LSPCON resume success\n");
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.h b/drivers/gpu/drm/i915/display/intel_lspcon.h
> index 37cfddf8a9c5..169db35db13e 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.h
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.h
> @@ -15,8 +15,7 @@ struct intel_digital_port;
>  struct intel_encoder;
>  struct intel_lspcon;
>  
> -bool lspcon_init(struct intel_digital_port *intel_dig_port);
> -void lspcon_resume(struct intel_lspcon *lspcon);
> +void lspcon_resume(struct intel_digital_port *intel_dig_port);
>  void lspcon_wait_pcon_mode(struct intel_lspcon *lspcon);
>  void lspcon_write_infoframe(struct intel_encoder *encoder,
>  			    const struct intel_crtc_state *crtc_state,
> -- 
> 2.17.1

-- 
Ville Syrjälä
Intel


More information about the dri-devel mailing list