[PATCH 01/13] drm/exynos: Stop using frame_vector helpers
Daniel Vetter
daniel.vetter at ffwll.ch
Wed Oct 7 21:32:04 UTC 2020
On Wed, Oct 7, 2020 at 10:33 PM John Hubbard <jhubbard at nvidia.com> wrote:
>
> On 10/7/20 9:44 AM, Daniel Vetter wrote:
> > All we need are a pages array, pin_user_pages_fast can give us that
> > directly. Plus this avoids the entire raw pfn side of get_vaddr_frames.
> >
> > Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
> > Cc: Jason Gunthorpe <jgg at ziepe.ca>
> > Cc: Inki Dae <inki.dae at samsung.com>
> > Cc: Joonyoung Shim <jy0922.shim at samsung.com>
> > Cc: Seung-Woo Kim <sw0312.kim at samsung.com>
> > Cc: Kyungmin Park <kyungmin.park at samsung.com>
> > Cc: Kukjin Kim <kgene at kernel.org>
> > Cc: Krzysztof Kozlowski <krzk at kernel.org>
> > Cc: Andrew Morton <akpm at linux-foundation.org>
> > Cc: John Hubbard <jhubbard at nvidia.com>
> > Cc: Jérôme Glisse <jglisse at redhat.com>
> > Cc: Jan Kara <jack at suse.cz>
> > Cc: Dan Williams <dan.j.williams at intel.com>
> > Cc: linux-mm at kvack.org
> > Cc: linux-arm-kernel at lists.infradead.org
> > Cc: linux-samsung-soc at vger.kernel.org
> > Cc: linux-media at vger.kernel.org
> > ---
> > drivers/gpu/drm/exynos/Kconfig | 1 -
> > drivers/gpu/drm/exynos/exynos_drm_g2d.c | 48 ++++++++++++-------------
> > 2 files changed, 22 insertions(+), 27 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
> > index 6417f374b923..43257ef3c09d 100644
> > --- a/drivers/gpu/drm/exynos/Kconfig
> > +++ b/drivers/gpu/drm/exynos/Kconfig
> > @@ -88,7 +88,6 @@ comment "Sub-drivers"
> > config DRM_EXYNOS_G2D
> > bool "G2D"
> > depends on VIDEO_SAMSUNG_S5P_G2D=n || COMPILE_TEST
> > - select FRAME_VECTOR
> > help
> > Choose this option if you want to use Exynos G2D for DRM.
> >
> > diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
> > index 967a5cdc120e..c83f6faac9de 100644
> > --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
> > +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
> > @@ -205,7 +205,8 @@ struct g2d_cmdlist_userptr {
> > dma_addr_t dma_addr;
> > unsigned long userptr;
> > unsigned long size;
> > - struct frame_vector *vec;
> > + struct page **pages;
> > + unsigned int npages;
> > struct sg_table *sgt;
> > atomic_t refcount;
> > bool in_pool;
> > @@ -378,7 +379,7 @@ static void g2d_userptr_put_dma_addr(struct g2d_data *g2d,
> > bool force)
> > {
> > struct g2d_cmdlist_userptr *g2d_userptr = obj;
> > - struct page **pages;
> > + int i;
>
> The above line can also be deleted, see below.
>
> >
> > if (!obj)
> > return;
> > @@ -398,15 +399,11 @@ static void g2d_userptr_put_dma_addr(struct g2d_data *g2d,
> > dma_unmap_sgtable(to_dma_dev(g2d->drm_dev), g2d_userptr->sgt,
> > DMA_BIDIRECTIONAL, 0);
> >
> > - pages = frame_vector_pages(g2d_userptr->vec);
> > - if (!IS_ERR(pages)) {
> > - int i;
> > + for (i = 0; i < g2d_userptr->npages; i++)
> > + set_page_dirty_lock(g2d_userptr->pages[i]);
> >
> > - for (i = 0; i < frame_vector_count(g2d_userptr->vec); i++)
> > - set_page_dirty_lock(pages[i]);
> > - }
> > - put_vaddr_frames(g2d_userptr->vec);
> > - frame_vector_destroy(g2d_userptr->vec);
> > + unpin_user_pages(g2d_userptr->pages, g2d_userptr->npages);
> > + kvfree(g2d_userptr->pages);
>
> You can avoid writing your own loop, and just simplify the whole thing down to
> two lines:
>
> unpin_user_pages_dirty_lock(g2d_userptr->pages, g2d_userptr->npages,
> true);
> kvfree(g2d_userptr->pages);
Oh nice, this is neat. I'll also roll it out in the habanalabs patch,
that has the same thing. Well almost, it only uses set_page_dirty, not
the _lock variant. But I have no idea whether that matters or not?
-Daniel
>
>
> >
> > if (!g2d_userptr->out_of_list)
> > list_del_init(&g2d_userptr->list);
> > @@ -474,35 +471,34 @@ static dma_addr_t *g2d_userptr_get_dma_addr(struct g2d_data *g2d,
> > offset = userptr & ~PAGE_MASK;
> > end = PAGE_ALIGN(userptr + size);
> > npages = (end - start) >> PAGE_SHIFT;
> > - g2d_userptr->vec = frame_vector_create(npages);
> > - if (!g2d_userptr->vec) {
> > + g2d_userptr->pages = kvmalloc_array(npages, sizeof(*g2d_userptr->pages),
> > + GFP_KERNEL);
> > + if (!g2d_userptr->pages) {
> > ret = -ENOMEM;
> > goto err_free;
> > }
> >
> > - ret = get_vaddr_frames(start, npages, FOLL_FORCE | FOLL_WRITE,
> > - g2d_userptr->vec);
> > + ret = pin_user_pages_fast(start, npages, FOLL_FORCE | FOLL_WRITE,
> > + g2d_userptr->pages);
> > if (ret != npages) {
> > DRM_DEV_ERROR(g2d->dev,
> > "failed to get user pages from userptr.\n");
> > if (ret < 0)
> > - goto err_destroy_framevec;
> > - ret = -EFAULT;
> > - goto err_put_framevec;
> > - }
> > - if (frame_vector_to_pages(g2d_userptr->vec) < 0) {
> > + goto err_destroy_pages;
> > + npages = ret;
> > ret = -EFAULT;
> > - goto err_put_framevec;
> > + goto err_unpin_pages;
> > }
> > + g2d_userptr->npages = npages;
> >
> > sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
> > if (!sgt) {
> > ret = -ENOMEM;
> > - goto err_put_framevec;
> > + goto err_unpin_pages;
> > }
> >
> > ret = sg_alloc_table_from_pages(sgt,
> > - frame_vector_pages(g2d_userptr->vec),
> > + g2d_userptr->pages,
> > npages, offset, size, GFP_KERNEL);
> > if (ret < 0) {
> > DRM_DEV_ERROR(g2d->dev, "failed to get sgt from pages.\n");
> > @@ -538,11 +534,11 @@ static dma_addr_t *g2d_userptr_get_dma_addr(struct g2d_data *g2d,
> > err_free_sgt:
> > kfree(sgt);
> >
> > -err_put_framevec:
> > - put_vaddr_frames(g2d_userptr->vec);
> > +err_unpin_pages:
> > + unpin_user_pages(g2d_userptr->pages, npages);
> >
> > -err_destroy_framevec:
> > - frame_vector_destroy(g2d_userptr->vec);
> > +err_destroy_pages:
> > + kvfree(g2d_userptr->pages);
> >
> > err_free:
> > kfree(g2d_userptr);
> >
>
> The rest all looks good, you've avoided the usual API pitfalls. :)
>
> thanks,
> --
> John Hubbard
> NVIDIA
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list