[PATCH v9 1/5] dt-bindings: display: Add support for Intel KeemBay Display

[Chrisanthus, Anitha]

> -----Original Message-----
> From: Neil Armstrong <narmstrong at baylibre.com>
> Sent: Friday, October 9, 2020 2:10 AM
> To: Chrisanthus, Anitha <anitha.chrisanthus at intel.com>; dri-
> devel at lists.freedesktop.org; devicetree at vger.kernel.org; Vetter, Daniel
> <daniel.vetter at intel.com>
> Cc: Dea, Edmund J <edmund.j.dea at intel.com>; sam at ravnborg.org
> Subject: Re: [PATCH v9 1/5] dt-bindings: display: Add support for Intel
> KeemBay Display
> 
> Hi,
> 
> On 09/10/2020 03:03, Anitha Chrisanthus wrote:
> > This patch adds bindings for Intel KeemBay Display
> >
> > v2: review changes from Rob Herring
> >
> > Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus at intel.com>
> > ---
> >  .../bindings/display/intel,keembay-display.yaml    | 99
> ++++++++++++++++++++++
> >  1 file changed, 99 insertions(+)
> >  create mode 100644
> Documentation/devicetree/bindings/display/intel,keembay-display.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/intel,keembay-
> display.yaml b/Documentation/devicetree/bindings/display/intel,keembay-
> display.yaml
> > new file mode 100644
> > index 0000000..a38493d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/intel,keembay-
> display.yaml
> > @@ -0,0 +1,99 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/intel,keembay-
> display.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Devicetree bindings for Intel Keem Bay display controller
> > +
> > +maintainers:
> > +  - Anitha Chrisanthus <anitha.chrisanthus at intel.com>
> > +  - Edmond J Dea <edmund.j.dea at intel.com>
> > +
> > +properties:
> > +  compatible:
> > +    const: intel,kmb_display
> > +
> > +  reg:
> > +    items:
> > +      - description: Lcd registers range
> > +      - description: Mipi registers range
> 
> Looking at the registers, the MIPI transceiver seems to be a separate IP,
> same for D-PHY which should have a proper PHY driver instead of beeing
> handled
> here.
Mipi is not a separate IP, it is all part of one sub system in the Intel Movidius Soc.
> 
> > +      - description: Msscam registers range
> 
> MSScam here seems to be a clock and reset controller for the LCD and MIPI
> IPs,
> thus should be handler out of DRM.
> 
> > +
> > +  reg-names:
> > +    items:
> > +      - const: lcd
> > +      - const: mipi
> > +      - const: msscam
> > +
> > +  clocks:
> > +    items:
> > +      - description: LCD controller clock
> > +      - description: Mipi DSI clock
> > +      - description: Mipi DSI econfig clock
> > +      - description: Mipi DSI config clock
> > +      - description: System clock or pll0 clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: clk_lcd
> > +      - const: clk_mipi
> > +      - const: clk_mipi_ecfg
> > +      - const: clk_mipi_cfg
> > +      - const: clk_pll0
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  encoder-slave:
> > +    description: bridge node entry for mipi to hdmi converter
> > +
> > +  port:
> > +    type: object
> > +    description: >
> > +          Port node with one endpoint connected to mipi to hdmi converter
> node.
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - clocks
> > +  - clock-names
> > +  - interrupts
> > +  - encoder-slave
> > +  - port
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #define MOVISOC_KMB_MSS_AUX_LCD
> > +    #define MOVISOC_KMB_MSS_AUX_MIPI_TX0
> > +    #define MOVISOC_KMB_MSS_AUX_MIPI_ECFG
> > +    #define MOVISOC_KMB_MSS_AUX_MIPI_CFG
> > +    #define MOVISOC_KMB_A53_PLL_0_OUT_0
> > +    display at 20900000 {
> > +      compatible = "intel,keembay-display";
> > +      reg = <0x20930000 0x3000>,
> > +            <0x20900000 0x4000>,
> > +            <0x20910000 0x30>;
> > +      reg-names = "lcd", "mipi", "msscam";
> > +      interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> > +      clocks = <&scmi_clk MOVISOC_KMB_MSS_AUX_LCD>,
> > +               <&scmi_clk MOVISOC_KMB_MSS_AUX_MIPI_TX0>,
> > +               <&scmi_clk MOVISOC_KMB_MSS_AUX_MIPI_ECFG>,
> > +               <&scmi_clk MOVISOC_KMB_MSS_AUX_MIPI_CFG>,
> > +               <&scmi_clk MOVISOC_KMB_A53_PLL_0_OUT_0>;
> > +      clock-names = "clk_lcd", "clk_mipi", "clk_mipi_ecfg",
> > +                    "clk_mipi_cfg", "clk_pll0";
> > +
> > +      encoder-slave = <&adv7535>;
> > +
> > +      port {
> > +            dsi_output: endpoint {
> > +                remote-endpoint = <&adv7535_input>;
> > +            };
> > +      };
> > +    };
> >
> 
> Anitha, Daniel, this keembay driver should be architectured like other ARM-
> like display
> controllers, with separate drivers for MIPI DSI bridge and msscam clock &
> reset controller.

> Neil