[RFC 05/13] drm/i915: Add support for starting FRL training for HDMI2.1 via PCON
Shankar, Uma
uma.shankar at intel.com
Sun Oct 18 22:14:36 UTC 2020
> -----Original Message-----
> From: Nautiyal, Ankit K <ankit.k.nautiyal at intel.com>
> Sent: Thursday, October 15, 2020 4:23 PM
> To: intel-gfx at lists.freedesktop.org
> Cc: dri-devel at lists.freedesktop.org; Shankar, Uma <uma.shankar at intel.com>;
> Kulkarni, Vandita <vandita.kulkarni at intel.com>; ville.syrjala at linux.intel.com;
> Sharma, Swati2 <swati2.sharma at intel.com>
> Subject: [RFC 05/13] drm/i915: Add support for starting FRL training for HDMI2.1
> via PCON
>
> This patch adds functions to start FRL training for an HDMI2.1 sink, connected via
> a PCON as a DP branch device.
> This patch also adds a new structure for storing frl training related data, when
> FRL training is completed.
>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> ---
> .../drm/i915/display/intel_display_types.h | 7 +
> drivers/gpu/drm/i915/display/intel_dp.c | 200 ++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_dp.h | 2 +
> 3 files changed, 209 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> b/drivers/gpu/drm/i915/display/intel_display_types.h
> index e2f58d0575a2..6c69922313d6 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1287,6 +1287,11 @@ struct intel_dp_compliance {
> u8 test_lane_count;
> };
>
> +struct intel_dp_pcon_frl {
> + bool is_trained;
> + int trained_rate_gbps;
> +};
> +
> struct intel_dp {
> i915_reg_t output_reg;
> u32 DP;
> @@ -1408,6 +1413,8 @@ struct intel_dp {
>
> bool hobl_failed;
> bool hobl_active;
> +
> + struct intel_dp_pcon_frl frl;
> };
>
> enum lspcon_vendor {
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index cd6934f28f32..c1342b5e7781 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2885,6 +2885,9 @@ static void intel_dp_prepare(struct intel_encoder
> *encoder,
> intel_dp->DP |= DP_PIPE_SEL_CHV(crtc->pipe);
> else
> intel_dp->DP |= DP_PIPE_SEL(crtc->pipe);
> +
> + intel_dp->frl.is_trained = false;
> + intel_dp->frl.trained_rate_gbps = 0;
> }
> }
>
> @@ -3781,6 +3784,9 @@ static void intel_disable_dp(struct intel_atomic_state
> *state,
> intel_edp_backlight_off(old_conn_state);
> intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
> intel_edp_panel_off(intel_dp);
> +
> + intel_dp->frl.is_trained = false;
> + intel_dp->frl.trained_rate_gbps = 0;
> }
>
> static void g4x_disable_dp(struct intel_atomic_state *state, @@ -3876,6
> +3882,200 @@ cpt_set_link_train(struct intel_dp *intel_dp,
> intel_de_posting_read(dev_priv, intel_dp->output_reg); }
>
> +static int intel_dp_get_max_rate_gbps(struct intel_dp *intel_dp) {
> + int max_link_clock, max_lanes, max_rate_khz, max_rate_gbps;
> +
> + max_link_clock = intel_dp_max_link_rate(intel_dp);
> + max_lanes = intel_dp_max_lane_count(intel_dp);
> + max_rate_khz = intel_dp_max_data_rate(max_link_clock, max_lanes);
> + max_rate_gbps = 8 * DIV_ROUND_UP(max_rate_khz, 1000000);
> +
> + return max_rate_gbps;
> +}
> +
> +static int intel_dp_pcon_get_frl_mask(u8 frl_bw_mask) {
> + int bw_gbps[] = {9, 18, 24, 32, 40, 48};
> + int i;
> +
> + for (i = ARRAY_SIZE(bw_gbps) - 1; i >= 0; i--) {
> + if (frl_bw_mask & (1 << i))
> + return bw_gbps[i];
> + }
> + return 0;
> +}
> +
> +static int intel_dp_pcon_set_frl_mask(int max_frl) {
> + int max_frl_mask = 0;
> +
> + switch (max_frl) {
> + case 48:
> + max_frl_mask |= DP_PCON_FRL_BW_MASK_48GBPS;
Just say it as return DP_PCON_FRL_BW_MASK_48GBPS.
Do it universally.
> + break;
> + case 40:
> + max_frl_mask |= DP_PCON_FRL_BW_MASK_40GBPS;
> + break;
> + case 32:
> + max_frl_mask |= DP_PCON_FRL_BW_MASK_32GBPS;
> + break;
> + case 24:
> + max_frl_mask |= DP_PCON_FRL_BW_MASK_24GBPS;
> + break;
> + case 18:
> + max_frl_mask |= DP_PCON_FRL_BW_MASK_18GBPS;
> + break;
> + case 9:
> + max_frl_mask |= DP_PCON_FRL_BW_MASK_9GBPS;
> + break;
> + default:
> + max_frl_mask = 0;
> + }
> +
> + return max_frl_mask;
> +}
> +
> +static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp) {
> + struct intel_connector *intel_connector = intel_dp->attached_connector;
> + struct drm_connector *connector = &intel_connector->base;
> +
> + return (connector->display_info.hdmi.max_frl_rate_per_lane *
> + connector->display_info.hdmi.max_lanes);
> +}
> +
> +static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp)
> +{ #define PCON_EXTENDED_TRAIN_MODE true#define
> PCON_CONCURRENT_MODE
> +true #define PCON_SEQUENTIAL_MODE !PCON_CONCURRENT_MODE #define
> +PCON_NORMAL_TRAIN_MODE !PCON_EXTENDED_TRAIN_MODE #define
Don't use true instead 1 < 0 as true is not the right thing to be used here.
> +TIMEOUT_FRL_READY_MS 500 #define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000
> +
> + struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> + int max_frl, max_pcon_frl, max_sink_frl, max_rate_gbps, max_frl_edid,
> ret;
> + u8 max_frl_mask = 0, frl_trained_mask;
> + bool is_active;
> +
> + ret = drm_dp_pcon_reset_frl_config(&intel_dp->aux);
> + if (ret < 0)
> + return ret;
> +
> + max_rate_gbps = intel_dp_get_max_rate_gbps(intel_dp);
> + drm_dbg(&i915->drm, "Source max rate = %d Gbps\n", max_rate_gbps);
> +
> + max_pcon_frl = intel_dp->dfp.pcon_max_frl;
Append it with rate or bw.
> + drm_dbg(&i915->drm, "PCON max rate = %d Gbps\n", max_pcon_frl);
> +
> + /* Double Check from HDMI SINK EDID */
> + max_frl_edid = intel_dp_hdmi_sink_max_frl(intel_dp);
> + drm_dbg(&i915->drm, "Sink max rate from EDID = %d Gbps\n",
> +max_frl_edid);
> +
> + max_sink_frl = intel_dp->dfp.sink_max_frl;
> + drm_dbg(&i915->drm, "Sink max rate from PCON = %d Gbps\n",
> +max_sink_frl);
> +
> + /* TODO MAX SINK FRL from PCON is not enumerated. Using MAX FRL
> value
Use multi line comment style.
> + * directly from EDID. Need to confirm from Spec.
> + */
> + max_frl = min(max_rate_gbps, min(max_frl_edid, max_pcon_frl));
> +
> + if (max_frl <= 0)
> + return -EINVAL;
> +
> + ret = drm_dp_pcon_frl_prepare(&intel_dp->aux, false);
> + if (ret < 0)
> + return ret;
> + /* Wait for PCON to be FRL Ready */
> + wait_for(is_active = drm_dp_pcon_is_frl_ready(&intel_dp->aux) == true,
> +TIMEOUT_FRL_READY_MS);
> +
> + if (!is_active)
> + return -ETIMEDOUT;
> +
> + max_frl_mask = intel_dp_pcon_set_frl_mask(max_frl);
> + ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl,
> PCON_SEQUENTIAL_MODE);
> + if (ret < 0)
> + return ret;
> + ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_mask,
> PCON_NORMAL_TRAIN_MODE);
> + if (ret < 0)
> + return ret;
> + ret = drm_dp_pcon_frl_enable(&intel_dp->aux);
> + if (ret < 0)
> + return ret;
> + /*
> + * Wait for FRL to be completed
> + * Check if the HDMI Link is up and active.
> + */
> + wait_for(is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux) ==
> +true, TIMEOUT_HDMI_LINK_ACTIVE_MS);
> +
> + if (!is_active)
> + return -ETIMEDOUT;
> + /*
> + * Verify HDMI Link configuration shows FRL Mode.
> + */
> + if (DP_PCON_HDMI_MODE_FRL !=
> drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, &frl_trained_mask)) {
> + drm_dbg(&i915->drm, "HDMI couldn't be trained in FRL
> Mode\n");
> + return -EINVAL;
> + }
> + drm_dbg(&i915->drm, "MAX_FRL_MASK = %u, FRL_TRAINED_MASK =
> %u\n",
> +max_frl_mask, frl_trained_mask);
> +
> + /*
> + * Read HDMI_LINK_STATUS_TRAINED 0x2005 bit 5
> + * TODO: Details not mentioned in spec. Need to check.
> + */
> +
> + intel_dp->frl.trained_rate_gbps =
> intel_dp_pcon_get_frl_mask(frl_trained_mask);
> + intel_dp->frl.is_trained = true;
> + drm_dbg(&i915->drm, "FRL trained with : %d Gbps\n",
> +intel_dp->frl.trained_rate_gbps);
> +
> + return 0;
> +}
> +
> +static bool intel_dp_is_frl_required(struct intel_dp *intel_dp) {
> + if (!intel_dp->frl.is_trained)
> + return true;
> + /*
> + * #TODO check if the mode really required FRL or can work
> + * with TMDS mode.
> + */
> +
> + return false;
> +}
> +
> +static bool intel_dp_is_hdmi_2_1_sink(struct intel_dp *intel_dp) {
> + if (drm_dp_is_branch(intel_dp->dpcd) &&
> + intel_dp_hdmi_sink_max_frl(intel_dp) > 0)
> + return true;
> +
> + return false;
> +}
> +
> +void intel_dp_check_frl_training(struct intel_dp *intel_dp) {
> + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
> +
> + if (!intel_dp_is_hdmi_2_1_sink(intel_dp) ||
> + !intel_dp_is_frl_required(intel_dp))
> + return;
> +
> + if (intel_dp_pcon_start_frl_training(intel_dp) < 0) {
> + int ret, mode;
> +
> + drm_dbg(&dev_priv->drm, "Couldnt set FRL mode, continuing
> with TMDS mode\n");
> + ret = drm_dp_pcon_reset_frl_config(&intel_dp->aux);
> + mode = drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, NULL);
> +
> + if (ret < 0 || mode != DP_PCON_HDMI_MODE_TMDS)
> + drm_dbg(&dev_priv->drm, "Issue with PCON, cannot set
> TMDS mode\n");
> + }
> +
> + else
Move it up and enclose in { to match the above if style.
> + drm_dbg(&dev_priv->drm, "FRL training Completed\n"); }
> +
> static void
> g4x_set_link_train(struct intel_dp *intel_dp,
> const struct intel_crtc_state *crtc_state, diff --git
> a/drivers/gpu/drm/i915/display/intel_dp.h
> b/drivers/gpu/drm/i915/display/intel_dp.h
> index fcc28eb242f2..81d83d88cd41 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -143,4 +143,6 @@ bool intel_dp_initial_fastset_check(struct intel_encoder
> *encoder, void intel_dp_sync_state(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state);
>
> +void intel_dp_check_frl_training(struct intel_dp *intel_dp);
> +
> #endif /* __INTEL_DP_H__ */
> --
> 2.17.1
More information about the dri-devel
mailing list