[PATCH 0/5] drm/tidss: Use new connector model for tidss
Tomi Valkeinen
tomi.valkeinen at ti.com
Mon Oct 19 12:11:03 UTC 2020
Hi Nikhil,
On 16/10/2020 13:39, Nikhil Devshatwar wrote:
> This series moves the tidss to using new connectoe model, where the
> SoC driver (tidss) creates the connector and all the bridges are
> attached with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR
>
> Since the bridges do not create the connector, the bus format and
> bus_flag is set after the format negotiation.
> Support format negotiations in the tfp410 and mhdp bridge drivers.
>
> Nikhil Devshatwar (5):
> drm/tidss: Move to newer connector model
> drm/tidss: Set bus_format correctly from bridge/connector
> drm: bridge: Propagate the bus flags from bridge->timings
> drm/bridge: tfp410: Support format negotiation
> drm/bridge: mhdp8564: Support format negotiation
I think the patch order could be a bit different. If you first change the tidss to use the new
connector model, and only afterwards fix the bridges we use, then there's a time when the displays
won't work.
Also, with J7 EVM and DP, when I unload the modules I see:
[ 43.238895] irq 31: nobody cared (try booting with the "irqpoll" option)
[ 43.245591] CPU: 0 PID: 349 Comm: irq/31-mhdp8546 Not tainted 5.9.0-rc5-00605-g08a291316f86 #4
[ 43.254186] Hardware name: Texas Instruments K3 J721E SoC (DT)
[ 43.260006] Call trace:
[ 43.262453] dump_backtrace+0x0/0x1d8
[ 43.266107] show_stack+0x18/0x28
[ 43.269416] dump_stack+0xe0/0x14c
[ 43.272810] __report_bad_irq+0x4c/0xdc
[ 43.276637] note_interrupt+0x2cc/0x388
[ 43.280465] handle_irq_event_percpu+0x88/0x90
[ 43.284898] handle_irq_event+0x48/0xf8
[ 43.288725] handle_fasteoi_irq+0xcc/0x180
[ 43.292811] generic_handle_irq+0x30/0x48
[ 43.296811] __handle_domain_irq+0x94/0x108
[ 43.300986] gic_handle_irq+0x60/0x158
[ 43.304726] el1_irq+0xbc/0x180
[ 43.307862] _raw_spin_unlock_irq+0x48/0x90
[ 43.312035] irq_finalize_oneshot.part.0+0x68/0x108
[ 43.316903] irq_thread_fn+0x60/0xa0
[ 43.320469] irq_thread+0x1b8/0x248
[ 43.323949] kthread+0x128/0x160
[ 43.327169] ret_from_fork+0x10/0x34
[ 43.330735] handlers:
[ 43.333020] [<000000005367c4f9>] irq_default_primary_handler threaded [<000000007e02b601>]
cdns_mhdp_irq_handler [cdns_mhdp8546]
[ 43.344607] Disabling IRQ #31
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
More information about the dri-devel
mailing list