[PATCH v6 07/52] dt-bindings: memory: tegra20: emc: Document OPP table and voltage regulator

[Dmitry Osipenko]

The SoC core voltage can't be changed without taking into account the
clock rate of External Memory Controller. Document OPP table that will
be used for dynamic voltage frequency scaling, taking into account EMC
voltage requirement. Document optional core voltage regulator, which is
optional because some boards may have a fixed core regulator and still
frequency scaling may be desired to have.

Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
---
 .../memory-controllers/nvidia,tegra20-emc.txt      | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt
index 0a53adc6ccba..8d09b228ac42 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt
@@ -14,11 +14,23 @@ Properties:
 - clocks : Should contain EMC clock.
 - nvidia,memory-controller : Phandle of the Memory Controller node.
 - #interconnect-cells : Should be 0.
+- core-supply: Phandle of voltage regulator of the SoC "core" power domain.
+- operating-points-v2: See ../bindings/opp/opp.txt for details.
 
 Child device nodes describe the memory settings for different configurations and clock rates.
 
 Example:
 
+	emc_icc_dvfs_opp_table: emc_opp_table0 {
+		compatible = "operating-points-v2";
+
+		opp at 36000000 {
+			opp-microvolt = <950000 950000 1300000>;
+			opp-hz = /bits/ 64 <36000000>;
+		};
+		...
+	};
+
 	memory-controller at 7000f400 {
 		#address-cells = < 1 >;
 		#size-cells = < 0 >;
@@ -28,6 +40,8 @@ Example:
 		interrupts = <0 78 0x04>;
 		clocks = <&tegra_car TEGRA20_CLK_EMC>;
 		nvidia,memory-controller = <&mc>;
+		core-supply = <&core_vdd_reg>;
+		operating-points-v2 = <&emc_icc_dvfs_opp_table>;
 	}
 
 
-- 
2.27.0