[PATCH 3/4] drm/bridge: ti-sn65dsi86: Read EDID blob over DDC

Stephen Boyd swboyd at chromium.org
Thu Oct 29 01:11:53 UTC 2020


Use the DDC connection to read the EDID from the eDP panel instead of
relying on the panel to tell us the modes.

Cc: Douglas Anderson <dianders at chromium.org>
Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
Cc: Jonas Karlman <jonas at kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec at siol.net>
Cc: Sean Paul <seanpaul at chromium.org>
Signed-off-by: Stephen Boyd <swboyd at chromium.org>
---
 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 8276fa50138f..6b6e98ca2881 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -119,6 +119,7 @@
  * @debugfs:      Used for managing our debugfs.
  * @host_node:    Remote DSI node.
  * @dsi:          Our MIPI DSI source.
+ * @edid:         Detected EDID of eDP panel.
  * @refclk:       Our reference clock.
  * @panel:        Our panel.
  * @enable_gpio:  The GPIO we toggle to enable the bridge.
@@ -144,6 +145,7 @@ struct ti_sn_bridge {
 	struct drm_bridge		bridge;
 	struct drm_connector		connector;
 	struct dentry			*debugfs;
+	struct edid			*edid;
 	struct device_node		*host_node;
 	struct mipi_dsi_device		*dsi;
 	struct clk			*refclk;
@@ -265,6 +267,23 @@ connector_to_ti_sn_bridge(struct drm_connector *connector)
 static int ti_sn_bridge_connector_get_modes(struct drm_connector *connector)
 {
 	struct ti_sn_bridge *pdata = connector_to_ti_sn_bridge(connector);
+	struct edid *edid = pdata->edid;
+	int num, ret;
+
+	if (!edid) {
+		pm_runtime_get_sync(pdata->dev);
+		edid = pdata->edid = drm_get_edid(connector, &pdata->aux.ddc);
+		pm_runtime_put(pdata->dev);
+	}
+
+	if (edid && drm_edid_is_valid(edid)) {
+		ret = drm_connector_update_edid_property(connector, edid);
+		if (!ret) {
+			num = drm_add_edid_modes(connector, edid);
+			if (num)
+				return num;
+		}
+	}
 
 	return drm_panel_get_modes(pdata->panel, connector);
 }
@@ -1245,6 +1264,7 @@ static int ti_sn_bridge_remove(struct i2c_client *client)
 	if (!pdata)
 		return -EINVAL;
 
+	kfree(pdata->edid);
 	ti_sn_debugfs_remove(pdata);
 
 	of_node_put(pdata->host_node);
-- 
Sent by a computer, using git, on the internet



More information about the dri-devel mailing list