[PATCH v2 1/3] dt-bindings: display: Add a property to deal with WiFi coexistence

[Maxime Ripard]

The RaspberryPi4 has both a WiFi chip and HDMI outputs capable of doing
4k. Unfortunately, the 1440p resolution at 60Hz has a TMDS rate on the
HDMI cable right in the middle of the first Wifi channel.

Add a property to our HDMI controller, that could be reused by other
similar HDMI controllers, to allow the OS to take whatever measure is
necessary to avoid that crosstalk.

Signed-off-by: Maxime Ripard <maxime at cerno.tech>

---

Changes from v1:
  - Renamed the property
  - Split it into a separate patch
---
 .../devicetree/bindings/display/brcm,bcm2711-hdmi.yaml      | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index 03a76729d26c..7ce06f9f9f8e 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -76,6 +76,12 @@ properties:
   resets:
     maxItems: 1
 
+  wifi-2.4ghz-coexistence:
+    type: boolean
+    description: >
+      Should the pixel frequencies in the WiFi frequencies range be
+      avoided?
+
 required:
   - compatible
   - reg
-- 
2.26.2