[PATCH v10 12/17] pwm: crc: Implement apply() method to support the new atomic PWM API
Hans de Goede
hdegoede at redhat.com
Thu Sep 3 11:23:32 UTC 2020
Replace the enable, disable and config pwm_ops with an apply op,
to support the new atomic PWM API.
Reviewed-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Acked-by: Thierry Reding <thierry.reding at gmail.com>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
Changes in v6:
- Rebase on 5.9-rc1
- Use do_div when calculating level because pwm_state.period and .duty_cycle are now u64
Changes in v3:
- Keep crc_pwm_calc_clk_div() helper to avoid needless churn
---
drivers/pwm/pwm-crc.c | 89 ++++++++++++++++++++++++++-----------------
1 file changed, 54 insertions(+), 35 deletions(-)
diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
index b72008c9b072..27dc30882424 100644
--- a/drivers/pwm/pwm-crc.c
+++ b/drivers/pwm/pwm-crc.c
@@ -51,59 +51,78 @@ static int crc_pwm_calc_clk_div(int period_ns)
return clk_div;
}
-static int crc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm)
+static int crc_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
{
- struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
- int div = crc_pwm_calc_clk_div(pwm_get_period(pwm));
+ struct crystalcove_pwm *crc_pwm = to_crc_pwm(chip);
+ struct device *dev = crc_pwm->chip.dev;
+ int err;
- regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, div | PWM_OUTPUT_ENABLE);
- regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1);
+ if (state->period > PWM_MAX_PERIOD_NS) {
+ dev_err(dev, "un-supported period_ns\n");
+ return -EINVAL;
+ }
- return 0;
-}
+ if (state->polarity != PWM_POLARITY_NORMAL)
+ return -EOPNOTSUPP;
-static void crc_pwm_disable(struct pwm_chip *c, struct pwm_device *pwm)
-{
- struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
- int div = crc_pwm_calc_clk_div(pwm_get_period(pwm));
+ if (pwm_is_enabled(pwm) && !state->enabled) {
+ err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);
+ if (err) {
+ dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err);
+ return err;
+ }
+ }
- regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);
- regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, div);
-}
+ if (pwm_get_duty_cycle(pwm) != state->duty_cycle ||
+ pwm_get_period(pwm) != state->period) {
+ u64 level = state->duty_cycle * PWM_MAX_LEVEL;
-static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
- int duty_ns, int period_ns)
-{
- struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
- struct device *dev = crc_pwm->chip.dev;
- int level;
+ do_div(level, state->period);
- if (period_ns > PWM_MAX_PERIOD_NS) {
- dev_err(dev, "un-supported period_ns\n");
- return -EINVAL;
+ err = regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level);
+ if (err) {
+ dev_err(dev, "Error writing PWM0_DUTY_CYCLE %d\n", err);
+ return err;
+ }
}
- if (pwm_get_period(pwm) != period_ns) {
- int clk_div = crc_pwm_calc_clk_div(period_ns);
-
+ if (pwm_is_enabled(pwm) && state->enabled &&
+ pwm_get_period(pwm) != state->period) {
/* changing the clk divisor, clear PWM_OUTPUT_ENABLE first */
- regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, 0);
+ err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, 0);
+ if (err) {
+ dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err);
+ return err;
+ }
+ }
- regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
- clk_div | PWM_OUTPUT_ENABLE);
+ if (pwm_get_period(pwm) != state->period ||
+ pwm_is_enabled(pwm) != state->enabled) {
+ int clk_div = crc_pwm_calc_clk_div(state->period);
+ int pwm_output_enable = state->enabled ? PWM_OUTPUT_ENABLE : 0;
+
+ err = regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
+ clk_div | pwm_output_enable);
+ if (err) {
+ dev_err(dev, "Error writing PWM0_CLK_DIV %d\n", err);
+ return err;
+ }
}
- /* change the pwm duty cycle */
- level = duty_ns * PWM_MAX_LEVEL / period_ns;
- regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level);
+ if (!pwm_is_enabled(pwm) && state->enabled) {
+ err = regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1);
+ if (err) {
+ dev_err(dev, "Error writing BACKLIGHT_EN %d\n", err);
+ return err;
+ }
+ }
return 0;
}
static const struct pwm_ops crc_pwm_ops = {
- .config = crc_pwm_config,
- .enable = crc_pwm_enable,
- .disable = crc_pwm_disable,
+ .apply = crc_pwm_apply,
};
static int crystalcove_pwm_probe(struct platform_device *pdev)
--
2.28.0
More information about the dri-devel
mailing list