[PATCH v5 37/80] drm/vc4: crtc: Add BCM2711 pixelvalves
Maxime Ripard
maxime at cerno.tech
Thu Sep 3 08:01:09 UTC 2020
The BCM2711 has 5 pixelvalves, so now that our driver is ready, let's add
support for them.
Reviewed-by: Eric Anholt <eric at anholt.net>
Tested-by: Chanwoo Choi <cw00.choi at samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
Tested-by: Stefan Wahren <stefan.wahren at i2se.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
drivers/gpu/drm/vc4/vc4_crtc.c | 95 ++++++++++++++++++++++++++++++++++-
drivers/gpu/drm/vc4/vc4_regs.h | 7 +++-
2 files changed, 100 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index dfac304fe2b0..a393f93390a2 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -208,6 +208,7 @@ void vc4_crtc_destroy(struct drm_crtc *crtc)
static u32 vc4_get_fifo_full_level(struct vc4_crtc *vc4_crtc, u32 format)
{
+ const struct vc4_crtc_data *crtc_data = vc4_crtc_to_vc4_crtc_data(vc4_crtc);
const struct vc4_pv_data *pv_data = vc4_crtc_to_vc4_pv_data(vc4_crtc);
u32 fifo_len_bytes = pv_data->fifo_depth;
@@ -230,6 +231,13 @@ static u32 vc4_get_fifo_full_level(struct vc4_crtc *vc4_crtc, u32 format)
case PV_CONTROL_FORMAT_24:
case PV_CONTROL_FORMAT_DSIV_24:
default:
+ /*
+ * For some reason, the pixelvalve4 doesn't work with
+ * the usual formula and will only work with 32.
+ */
+ if (crtc_data->hvs_output == 5)
+ return 32;
+
return fifo_len_bytes - 3 * HVS_FIFO_LATENCY_PIX;
}
}
@@ -238,9 +246,13 @@ static u32 vc4_crtc_get_fifo_full_level_bits(struct vc4_crtc *vc4_crtc,
u32 format)
{
u32 level = vc4_get_fifo_full_level(vc4_crtc, format);
+ u32 ret = 0;
+
+ ret |= VC4_SET_FIELD((level >> 6),
+ PV5_CONTROL_FIFO_LEVEL_HIGH);
- return VC4_SET_FIELD(level & 0x3f,
- PV_CONTROL_FIFO_LEVEL);
+ return ret | VC4_SET_FIELD(level & 0x3f,
+ PV_CONTROL_FIFO_LEVEL);
}
/*
@@ -278,6 +290,8 @@ static void vc4_crtc_pixelvalve_reset(struct drm_crtc *crtc)
static void vc4_crtc_config_pv(struct drm_crtc *crtc)
{
+ struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc);
struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder);
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
@@ -358,6 +372,11 @@ static void vc4_crtc_config_pv(struct drm_crtc *crtc)
if (is_dsi)
CRTC_WRITE(PV_HACT_ACT, mode->hdisplay * pixel_rep);
+ if (vc4->hvs->hvs5)
+ CRTC_WRITE(PV_MUX_CFG,
+ VC4_SET_FIELD(PV_MUX_CFG_RGB_PIXEL_MUX_MODE_NO_SWAP,
+ PV_MUX_CFG_RGB_PIXEL_MUX_MODE));
+
CRTC_WRITE(PV_CONTROL, PV_CONTROL_FIFO_CLR |
vc4_crtc_get_fifo_full_level_bits(vc4_crtc, format) |
VC4_SET_FIELD(format, PV_CONTROL_FORMAT) |
@@ -907,10 +926,82 @@ static const struct vc4_pv_data bcm2835_pv2_data = {
},
};
+static const struct vc4_pv_data bcm2711_pv0_data = {
+ .base = {
+ .hvs_available_channels = BIT(0),
+ .hvs_output = 0,
+ },
+ .debugfs_name = "crtc0_regs",
+ .fifo_depth = 64,
+ .pixels_per_clock = 1,
+ .encoder_types = {
+ [0] = VC4_ENCODER_TYPE_DSI0,
+ [1] = VC4_ENCODER_TYPE_DPI,
+ },
+};
+
+static const struct vc4_pv_data bcm2711_pv1_data = {
+ .base = {
+ .hvs_available_channels = BIT(0) | BIT(1) | BIT(2),
+ .hvs_output = 3,
+ },
+ .debugfs_name = "crtc1_regs",
+ .fifo_depth = 64,
+ .pixels_per_clock = 1,
+ .encoder_types = {
+ [0] = VC4_ENCODER_TYPE_DSI1,
+ [1] = VC4_ENCODER_TYPE_SMI,
+ },
+};
+
+static const struct vc4_pv_data bcm2711_pv2_data = {
+ .base = {
+ .hvs_available_channels = BIT(0) | BIT(1) | BIT(2),
+ .hvs_output = 4,
+ },
+ .debugfs_name = "crtc2_regs",
+ .fifo_depth = 256,
+ .pixels_per_clock = 2,
+ .encoder_types = {
+ [0] = VC4_ENCODER_TYPE_HDMI0,
+ },
+};
+
+static const struct vc4_pv_data bcm2711_pv3_data = {
+ .base = {
+ .hvs_available_channels = BIT(1),
+ .hvs_output = 1,
+ },
+ .debugfs_name = "crtc3_regs",
+ .fifo_depth = 64,
+ .pixels_per_clock = 1,
+ .encoder_types = {
+ [0] = VC4_ENCODER_TYPE_VEC,
+ },
+};
+
+static const struct vc4_pv_data bcm2711_pv4_data = {
+ .base = {
+ .hvs_available_channels = BIT(0) | BIT(1) | BIT(2),
+ .hvs_output = 5,
+ },
+ .debugfs_name = "crtc4_regs",
+ .fifo_depth = 64,
+ .pixels_per_clock = 2,
+ .encoder_types = {
+ [0] = VC4_ENCODER_TYPE_HDMI1,
+ },
+};
+
static const struct of_device_id vc4_crtc_dt_match[] = {
{ .compatible = "brcm,bcm2835-pixelvalve0", .data = &bcm2835_pv0_data },
{ .compatible = "brcm,bcm2835-pixelvalve1", .data = &bcm2835_pv1_data },
{ .compatible = "brcm,bcm2835-pixelvalve2", .data = &bcm2835_pv2_data },
+ { .compatible = "brcm,bcm2711-pixelvalve0", .data = &bcm2711_pv0_data },
+ { .compatible = "brcm,bcm2711-pixelvalve1", .data = &bcm2711_pv1_data },
+ { .compatible = "brcm,bcm2711-pixelvalve2", .data = &bcm2711_pv2_data },
+ { .compatible = "brcm,bcm2711-pixelvalve3", .data = &bcm2711_pv3_data },
+ { .compatible = "brcm,bcm2711-pixelvalve4", .data = &bcm2711_pv4_data },
{}
};
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 7fbac68b6fe1..c0031ab19689 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -129,6 +129,8 @@
#define V3D_ERRSTAT 0x00f20
#define PV_CONTROL 0x00
+# define PV5_CONTROL_FIFO_LEVEL_HIGH_MASK VC4_MASK(26, 25)
+# define PV5_CONTROL_FIFO_LEVEL_HIGH_SHIFT 25
# define PV_CONTROL_FORMAT_MASK VC4_MASK(23, 21)
# define PV_CONTROL_FORMAT_SHIFT 21
# define PV_CONTROL_FORMAT_24 0
@@ -208,6 +210,11 @@
#define PV_HACT_ACT 0x30
+#define PV_MUX_CFG 0x34
+# define PV_MUX_CFG_RGB_PIXEL_MUX_MODE_MASK VC4_MASK(5, 2)
+# define PV_MUX_CFG_RGB_PIXEL_MUX_MODE_SHIFT 2
+# define PV_MUX_CFG_RGB_PIXEL_MUX_MODE_NO_SWAP 8
+
#define SCALER_CHANNELS_COUNT 3
#define SCALER_DISPCTRL 0x00000000
--
git-series 0.9.1
More information about the dri-devel
mailing list