[PATCH v2 10/18] drm/dp: Add drm_dp_downstream_{min, max}_tmds_clock()

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Add helpers to get the TMDS clock limits for HDMI/DVI downstream
facing ports.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/drm_dp_helper.c | 116 ++++++++++++++++++++++++++++++++
 include/drm/drm_dp_helper.h     |   6 ++
 2 files changed, 122 insertions(+)

diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 822a30e609ef..f567428f2aef 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -643,6 +643,114 @@ int drm_dp_downstream_max_dotclock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
 }
 EXPORT_SYMBOL(drm_dp_downstream_max_dotclock);
 
+/**
+ * drm_dp_downstream_max_tmds_clock() - extract downstream facing port max TMDS clock
+ * @dpcd: DisplayPort configuration data
+ * @port_cap: port capabilities
+ * @edid: EDID
+ *
+ * Returns HDMI/DVI downstream facing port max TMDS clock in kHz on success,
+ * or 0 if max TMDS clock not defined
+ */
+int drm_dp_downstream_max_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+				     const u8 port_cap[4],
+				     const struct edid *edid)
+{
+	if (!drm_dp_is_branch(dpcd))
+		return 0;
+
+	if (dpcd[DP_DPCD_REV] < 0x11) {
+		switch (dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_TYPE_MASK) {
+		case DP_DWN_STRM_PORT_TYPE_TMDS:
+			return 165000;
+		default:
+			return 0;
+		}
+	}
+
+	switch (port_cap[0] & DP_DS_PORT_TYPE_MASK) {
+	case DP_DS_PORT_TYPE_DP_DUALMODE:
+		if (is_edid_digital_input_dp(edid))
+			return 0;
+		/*
+		 * It's left up to the driver to check the
+		 * DP dual mode adapter's max TMDS clock.
+		 *
+		 * Unfortunatley it looks like branch devices
+		 * may not fordward that the DP dual mode i2c
+		 * access so we just usually get i2c nak :(
+		 */
+		fallthrough;
+	case DP_DS_PORT_TYPE_HDMI:
+		 /*
+		  * We should perhaps assume 165 MHz when detailed cap
+		  * info is not available. But looks like many typical
+		  * branch devices fall into that category and so we'd
+		  * probably end up with users complaining that they can't
+		  * get high resolution modes with their favorite dongle.
+		  *
+		  * So let's limit to 300 MHz instead since DPCD 1.4
+		  * HDMI 2.0 DFPs are required to have the detailed cap
+		  * info. So it's more likely we're dealing with a HDMI 1.4
+		  * compatible* device here.
+		  */
+		if ((dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DETAILED_CAP_INFO_AVAILABLE) == 0)
+			return 300000;
+		return port_cap[1] * 2500;
+	case DP_DS_PORT_TYPE_DVI:
+		if ((dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DETAILED_CAP_INFO_AVAILABLE) == 0)
+			return 165000;
+		/* FIXME what to do about DVI dual link? */
+		return port_cap[1] * 2500;
+	default:
+		return 0;
+	}
+}
+EXPORT_SYMBOL(drm_dp_downstream_max_tmds_clock);
+
+/**
+ * drm_dp_downstream_min_tmds_clock() - extract downstream facing port min TMDS clock
+ * @dpcd: DisplayPort configuration data
+ * @port_cap: port capabilities
+ * @edid: EDID
+ *
+ * Returns HDMI/DVI downstream facing port min TMDS clock in kHz on success,
+ * or 0 if max TMDS clock not defined
+ */
+int drm_dp_downstream_min_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+				     const u8 port_cap[4],
+				     const struct edid *edid)
+{
+	if (!drm_dp_is_branch(dpcd))
+		return 0;
+
+	if (dpcd[DP_DPCD_REV] < 0x11) {
+		switch (dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_TYPE_MASK) {
+		case DP_DWN_STRM_PORT_TYPE_TMDS:
+			return 25000;
+		default:
+			return 0;
+		}
+	}
+
+	switch (port_cap[0] & DP_DS_PORT_TYPE_MASK) {
+	case DP_DS_PORT_TYPE_DP_DUALMODE:
+		if (is_edid_digital_input_dp(edid))
+			return 0;
+		fallthrough;
+	case DP_DS_PORT_TYPE_DVI:
+	case DP_DS_PORT_TYPE_HDMI:
+		/*
+		 * Unclear whether the protocol converter could
+		 * utilize pixel replication. Assume it won't.
+		 */
+		return 25000;
+	default:
+		return 0;
+	}
+}
+EXPORT_SYMBOL(drm_dp_downstream_min_tmds_clock);
+
 /**
   * drm_dp_downstream_max_bpc() - extract downstream facing port max
   *                               bits per component
@@ -788,6 +896,14 @@ void drm_dp_downstream_debug(struct seq_file *m,
 		if (clk > 0)
 			seq_printf(m, "\t\tMax dot clock: %d kHz\n", clk);
 
+		clk = drm_dp_downstream_max_tmds_clock(dpcd, port_cap, edid);
+		if (clk > 0)
+			seq_printf(m, "\t\tMax TMDS clock: %d kHz\n", clk);
+
+		clk = drm_dp_downstream_min_tmds_clock(dpcd, port_cap, edid);
+		if (clk > 0)
+			seq_printf(m, "\t\tMin TMDS clock: %d kHz\n", clk);
+
 		bpc = drm_dp_downstream_max_bpc(dpcd, port_cap, edid);
 
 		if (bpc > 0)
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 19bc04207788..6812a3e0de8d 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1645,6 +1645,12 @@ bool drm_dp_downstream_is_tmds(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
 			       const struct edid *edid);
 int drm_dp_downstream_max_dotclock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
 				   const u8 port_cap[4]);
+int drm_dp_downstream_max_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+				     const u8 port_cap[4],
+				     const struct edid *edid);
+int drm_dp_downstream_min_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
+				     const u8 port_cap[4],
+				     const struct edid *edid);
 int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
 			      const u8 port_cap[4],
 			      const struct edid *edid);
-- 
2.26.2