[PATCH 09/13] arm64: dts: imx8mp-evk: Align pin configuration group names with schema
Lucas Stach
l.stach at pengutronix.de
Fri Sep 4 14:59:46 UTC 2020
On Fr, 2020-09-04 at 16:53 +0200, Krzysztof Kozlowski wrote:
> Device tree schema expects pin configuration groups to end with 'grp'
> suffix, otherwise dtbs_check complain with a warning like:
>
> ... 'usdhc3grp-100mhz', 'usdhc3grp-200mhz' do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
Reviewed-by: Lucas Stach <l.stach at pengutronix.de>
> ---
> arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 3d535f1b3440..ad66f1286d95 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -157,7 +157,7 @@
> >;
> };
>
> - pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
> + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
> fsl,pins = <
> MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
> >;
> @@ -182,7 +182,7 @@
> >;
> };
>
> - pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
> + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> fsl,pins = <
> MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
> MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
> @@ -194,7 +194,7 @@
> >;
> };
>
> - pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
> + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> fsl,pins = <
> MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
> MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
> @@ -206,7 +206,7 @@
> >;
> };
>
> - pinctrl_usdhc2_gpio: usdhc2grp-gpio {
> + pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> fsl,pins = <
> MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
> >;
> @@ -228,7 +228,7 @@
> >;
> };
>
> - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
> + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> fsl,pins = <
> MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
> MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
> @@ -244,7 +244,7 @@
> >;
> };
>
> - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
> + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> fsl,pins = <
> MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
> MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
More information about the dri-devel
mailing list