[PATCH V3] i2c: i2c-qcom-geni: Add shutdown callback for i2c
Roja Rani Yarubandi
rojay at codeaurora.org
Mon Sep 7 13:07:31 UTC 2020
If the hardware is still accessing memory after SMMU translation
is disabled (as part of smmu shutdown callback), then the
IOVAs (I/O virtual address) which it was using will go on the bus
as the physical addresses which will result in unknown crashes
like NoC/interconnect errors.
So, implement shutdown callback to i2c driver to stop on-going transfer
and unmap DMA mappings during system "reboot" or "shutdown".
Store DMA mapping data in geni_i2c_dev struct to enhance DMA mapping
data scope. For example during shutdown callback to unmap DMA mapping,
this stored DMA mapping data can be used to call geni_se_tx_dma_unprep
and geni_se_rx_dma_unprep functions.
Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi <rojay at codeaurora.org>
---
Changes in V2:
- As per Stephen's comments added seperate function for stop transfer,
fixed minor nitpicks.
- As per Stephen's comments, changed commit text.
Changes in V3:
- As per Stephen's comments, squashed patch 1 into patch 2, added Fixes tag.
- As per Akash's comments, included FIFO case in stop_xfer, fixed minor nitpicks.
drivers/i2c/busses/i2c-qcom-geni.c | 70 +++++++++++++++++++++++++++---
include/linux/qcom-geni-se.h | 5 +++
2 files changed, 69 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index dead5db3315a..b3609760909f 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -86,6 +86,9 @@ struct geni_i2c_dev {
u32 clk_freq_out;
const struct geni_i2c_clk_fld *clk_fld;
int suspended;
+ dma_addr_t tx_dma;
+ dma_addr_t rx_dma;
+ size_t xfer_len;
};
struct geni_i2c_err_log {
@@ -352,12 +355,12 @@ static void geni_i2c_tx_fsm_rst(struct geni_i2c_dev *gi2c)
static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
u32 m_param)
{
- dma_addr_t rx_dma;
unsigned long time_left;
void *dma_buf = NULL;
struct geni_se *se = &gi2c->se;
size_t len = msg->len;
+ gi2c->xfer_len = len;
if (!of_machine_is_compatible("lenovo,yoga-c630"))
dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
@@ -368,7 +371,7 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
writel_relaxed(len, se->base + SE_I2C_RX_TRANS_LEN);
- if (dma_buf && geni_se_rx_dma_prep(se, dma_buf, len, &rx_dma)) {
+ if (dma_buf && geni_se_rx_dma_prep(se, dma_buf, len, &gi2c->rx_dma)) {
geni_se_select_mode(se, GENI_SE_FIFO);
i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
dma_buf = NULL;
@@ -384,7 +387,8 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
if (dma_buf) {
if (gi2c->err)
geni_i2c_rx_fsm_rst(gi2c);
- geni_se_rx_dma_unprep(se, rx_dma, len);
+ geni_se_rx_dma_unprep(se, gi2c->rx_dma, len);
+ gi2c->rx_dma = (dma_addr_t)NULL;
i2c_put_dma_safe_msg_buf(dma_buf, msg, !gi2c->err);
}
@@ -394,12 +398,12 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
u32 m_param)
{
- dma_addr_t tx_dma;
unsigned long time_left;
void *dma_buf = NULL;
struct geni_se *se = &gi2c->se;
size_t len = msg->len;
+ gi2c->xfer_len = len;
if (!of_machine_is_compatible("lenovo,yoga-c630"))
dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
@@ -410,7 +414,7 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
writel_relaxed(len, se->base + SE_I2C_TX_TRANS_LEN);
- if (dma_buf && geni_se_tx_dma_prep(se, dma_buf, len, &tx_dma)) {
+ if (dma_buf && geni_se_tx_dma_prep(se, dma_buf, len, &gi2c->tx_dma)) {
geni_se_select_mode(se, GENI_SE_FIFO);
i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
dma_buf = NULL;
@@ -429,7 +433,8 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
if (dma_buf) {
if (gi2c->err)
geni_i2c_tx_fsm_rst(gi2c);
- geni_se_tx_dma_unprep(se, tx_dma, len);
+ geni_se_tx_dma_unprep(se, gi2c->tx_dma, len);
+ gi2c->tx_dma = (dma_addr_t)NULL;
i2c_put_dma_safe_msg_buf(dma_buf, msg, !gi2c->err);
}
@@ -479,6 +484,51 @@ static int geni_i2c_xfer(struct i2c_adapter *adap,
return ret;
}
+static void geni_i2c_stop_xfer(struct geni_i2c_dev *gi2c)
+{
+ int ret;
+ u32 dma;
+ u32 val;
+ u32 geni_status;
+ struct geni_se *se = &gi2c->se;
+
+ ret = pm_runtime_get_sync(gi2c->se.dev);
+ if (ret < 0) {
+ dev_err(gi2c->se.dev, "Failed to resume device: %d\n", ret);
+ return;
+ }
+
+ geni_status = readl_relaxed(gi2c->se.base + SE_GENI_STATUS);
+ if (geni_status & M_GENI_CMD_ACTIVE) {
+ geni_i2c_abort_xfer(gi2c);
+ dma = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
+ if (dma) {
+ val = readl_relaxed(gi2c->se.base + SE_DMA_DEBUG_REG0);
+ if (val & DMA_TX_ACTIVE) {
+ gi2c->cur_wr = 0;
+ if (gi2c->err)
+ geni_i2c_tx_fsm_rst(gi2c);
+ if (gi2c->tx_dma) {
+ geni_se_tx_dma_unprep(se,
+ gi2c->tx_dma, gi2c->xfer_len);
+ gi2c->tx_dma = (dma_addr_t)NULL;
+ }
+ } else if (val & DMA_RX_ACTIVE) {
+ gi2c->cur_rd = 0;
+ if (gi2c->err)
+ geni_i2c_rx_fsm_rst(gi2c);
+ if (gi2c->rx_dma) {
+ geni_se_rx_dma_unprep(se,
+ gi2c->rx_dma, gi2c->xfer_len);
+ gi2c->rx_dma = (dma_addr_t)NULL;
+ }
+ }
+ }
+ }
+
+ pm_runtime_put_sync_suspend(gi2c->se.dev);
+}
+
static u32 geni_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
@@ -630,6 +680,13 @@ static int geni_i2c_remove(struct platform_device *pdev)
return 0;
}
+static void geni_i2c_shutdown(struct platform_device *pdev)
+{
+ struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
+
+ geni_i2c_stop_xfer(gi2c);
+}
+
static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
{
int ret;
@@ -694,6 +751,7 @@ MODULE_DEVICE_TABLE(of, geni_i2c_dt_match);
static struct platform_driver geni_i2c_driver = {
.probe = geni_i2c_probe,
.remove = geni_i2c_remove,
+ .shutdown = geni_i2c_shutdown,
.driver = {
.name = "geni_i2c",
.pm = &geni_i2c_pm_ops,
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index 8f385fbe5a0e..7279d8b3b04c 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -96,6 +96,7 @@ struct geni_se {
#define SE_DMA_RX_FSM_RST 0xd58
#define SE_HW_PARAM_0 0xe24
#define SE_HW_PARAM_1 0xe28
+#define SE_DMA_DEBUG_REG0 0xe40
/* GENI_FORCE_DEFAULT_REG fields */
#define FORCE_DEFAULT BIT(0)
@@ -226,6 +227,10 @@ struct geni_se {
#define RX_GENI_CANCEL_IRQ BIT(11)
#define RX_GENI_GP_IRQ_EXT GENMASK(13, 12)
+/* SE_DMA_DEBUG_REG0 Register fields */
+#define DMA_TX_ACTIVE BIT(0)
+#define DMA_RX_ACTIVE BIT(1)
+
/* SE_HW_PARAM_0 fields */
#define TX_FIFO_WIDTH_MSK GENMASK(29, 24)
#define TX_FIFO_WIDTH_SHFT 24
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
More information about the dri-devel
mailing list