[PATCH 0/3] drm/msm/dsi: support SM8150 and SM8250

[Dmitry Baryshkov]

On 04/09/2020 20:28, Jonathan Marek wrote:
> Add support for SM8150 and SM8250 DSI.
> 
> Note I haven't tested SM8150 recently, but DSI is almost identical to SM8250.

On SM8250:
Tested-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

> 
> Jonathan Marek (3):
>    drm/msm/dsi: remove unused clk_pre/clk_post in msm_dsi_dphy_timing
>    drm/msm/dsi: add DSI config for sm8150 and sm8250
>    drm/msm/dsi: add support for 7nm DSI PHY/PLL
> 
>   .../devicetree/bindings/display/msm/dsi.txt   |   6 +-
>   drivers/gpu/drm/msm/Kconfig                   |   7 +
>   drivers/gpu/drm/msm/Makefile                  |   2 +
>   drivers/gpu/drm/msm/dsi/dsi.h                 |   2 +
>   drivers/gpu/drm/msm/dsi/dsi.xml.h             | 423 ++++++++
>   drivers/gpu/drm/msm/dsi/dsi_cfg.c             |   5 +-
>   drivers/gpu/drm/msm/dsi/dsi_cfg.h             |   2 +
>   drivers/gpu/drm/msm/dsi/phy/dsi_phy.c         | 102 ++
>   drivers/gpu/drm/msm/dsi/phy/dsi_phy.h         |   6 +-
>   drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c     | 255 +++++
>   drivers/gpu/drm/msm/dsi/pll/dsi_pll.c         |   4 +
>   drivers/gpu/drm/msm/dsi/pll/dsi_pll.h         |  10 +
>   drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c     | 902 ++++++++++++++++++
>   13 files changed, 1721 insertions(+), 5 deletions(-)
>   create mode 100644 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
>   create mode 100644 drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c
> 


-- 
With best wishes
Dmitry