[PATCH 6/6] drm/meson: add support for MIPI-DSI transceiver
Daniel Vetter
daniel at ffwll.ch
Mon Sep 7 18:03:15 UTC 2020
On Mon, Sep 07, 2020 at 11:03:29AM +0200, Neil Armstrong wrote:
> On 07/09/2020 10:44, Daniel Vetter wrote:
> > On Mon, Sep 07, 2020 at 10:43:51AM +0200, Daniel Vetter wrote:
> >> On Mon, Sep 07, 2020 at 10:18:25AM +0200, Neil Armstrong wrote:
> >>> The Amlogic AXg SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a), with a custom
> >>> glue managing the IP resets, clock and data input similar to the DW-HDMI Glue on other
> >>> Amlogic SoCs.
> >>>
> >>> This adds support for the Glue managing the transceiver, mimicing the init flow provided
> >>> by Amlogic to setup the ENCl encoder, the glue, the transceiver, the digital D-PHY and the
> >>> Analog PHY in the proper way.
> >>>
> >>> The DW-MIPI-DSI transceiver + D-PHY are directly clocked by the VCLK2 clock, which pixel clock
> >>> is derived and feeds the ENCL encoder and the VIU pixel reader.
> >>>
> >>> An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
> >>> DW-MIPI-DSI transceiver.
> >>>
> >>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> >>
> >> More dw-hdmi drivers which aren't bridges but components, and the thing is
> >> still midlayer-y as heck :-/
> >
> > *dw-dsi, but really they both work the same way and should both be fixed
> > ...
>
> They are bridges but since they have platform-dependent code due to theirs's generic IP
> nature, they need to be intanciated by components to sync with the platform code.
Yeah that's how it currently works, but there's not much reason why it
needs to work like that. That platform glue code can also be put behind
the drm_bridge abstraction, and we could use the normal dt based bridge
lookup like for everything else.
Afaiui the only reason dw-* bridge drivers work like that is because for
historical reasons we only had component.c at first, and none of the more
fancy dynamic bridge lookup. So would be really good to switch this all
over to a proper&clean bridge abstraction, and not leak everything around.
I've typed up what I think should be the way forward a few times already,
but thus far not even the todo.rst entry materialized:
https://lore.kernel.org/dri-devel/20200430135841.GE10381@phenom.ffwll.local/
If everyone is always about "not in my patch series" it'll never happen.
Cheers, Daniel
>
> Neil
>
> >
> >>
> >> Can we try to fix this? There's a ton of this going on, and the more we
> >> add the old fashioned way the harder this gets to fix up for real.
> >> -Daniel
> >>
> >>> ---
> >>> drivers/gpu/drm/meson/Kconfig | 7 +
> >>> drivers/gpu/drm/meson/Makefile | 1 +
> >>> drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 562 ++++++++++++++++++++++
> >>> 3 files changed, 570 insertions(+)
> >>> create mode 100644 drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
> >>>
> >>> diff --git a/drivers/gpu/drm/meson/Kconfig b/drivers/gpu/drm/meson/Kconfig
> >>> index 9f9281dd49f8..385f6f23839b 100644
> >>> --- a/drivers/gpu/drm/meson/Kconfig
> >>> +++ b/drivers/gpu/drm/meson/Kconfig
> >>> @@ -16,3 +16,10 @@ config DRM_MESON_DW_HDMI
> >>> default y if DRM_MESON
> >>> select DRM_DW_HDMI
> >>> imply DRM_DW_HDMI_I2S_AUDIO
> >>> +
> >>> +config DRM_MESON_DW_MIPI_DSI
> >>> + tristate "MIPI DSI Synopsys Controller support for Amlogic Meson Display"
> >>> + depends on DRM_MESON
> >>> + default y if DRM_MESON
> >>> + select DRM_DW_MIPI_DSI
> >>> + select GENERIC_PHY_MIPI_DPHY
> >>> diff --git a/drivers/gpu/drm/meson/Makefile b/drivers/gpu/drm/meson/Makefile
> >>> index 28a519cdf66b..2cc870e91182 100644
> >>> --- a/drivers/gpu/drm/meson/Makefile
> >>> +++ b/drivers/gpu/drm/meson/Makefile
> >>> @@ -5,3 +5,4 @@ meson-drm-y += meson_rdma.o meson_osd_afbcd.o
> >>>
> >>> obj-$(CONFIG_DRM_MESON) += meson-drm.o
> >>> obj-$(CONFIG_DRM_MESON_DW_HDMI) += meson_dw_hdmi.o
> >>> +obj-$(CONFIG_DRM_MESON_DW_MIPI_DSI) += meson_dw_mipi_dsi.o
> >>> diff --git a/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
> >>> new file mode 100644
> >>> index 000000000000..bbe1294fce7c
> >>> --- /dev/null
> >>> +++ b/drivers/gpu/drm/meson/meson_dw_mipi_dsi.c
> >>> @@ -0,0 +1,562 @@
> >>> +// SPDX-License-Identifier: GPL-2.0-or-later
> >>> +/*
> >>> + * Copyright (C) 2016 BayLibre, SAS
> >>> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> >>> + * Copyright (C) 2015 Amlogic, Inc. All rights reserved.
> >>> + */
> >>> +
> >>> +#include <linux/clk.h>
> >>> +#include <linux/component.h>
> >>> +#include <linux/kernel.h>
> >>> +#include <linux/module.h>
> >>> +#include <linux/of_device.h>
> >>> +#include <linux/of_graph.h>
> >>> +#include <linux/reset.h>
> >>> +#include <linux/phy/phy.h>
> >>> +
> >>> +#include <video/mipi_display.h>
> >>> +
> >>> +#include <drm/bridge/dw_mipi_dsi.h>
> >>> +#include <drm/drm_mipi_dsi.h>
> >>> +
> >>> +#include <drm/drm_atomic_helper.h>
> >>> +#include <drm/drm_device.h>
> >>> +#include <drm/drm_probe_helper.h>
> >>> +#include <drm/drm_print.h>
> >>> +
> >>> +#include "meson_drv.h"
> >>> +#include "meson_dw_mipi_dsi.h"
> >>> +#include "meson_registers.h"
> >>> +#include "meson_venc.h"
> >>> +
> >>> +#define DRIVER_NAME "meson-dw-mipi-dsi"
> >>> +#define DRIVER_DESC "Amlogic Meson MIPI-DSI DRM driver"
> >>> +
> >>> +/* MIPI DSI/VENC Color Format Definitions */
> >>> +#define MIPI_DSI_VENC_COLOR_30B 0x0
> >>> +#define MIPI_DSI_VENC_COLOR_24B 0x1
> >>> +#define MIPI_DSI_VENC_COLOR_18B 0x2
> >>> +#define MIPI_DSI_VENC_COLOR_16B 0x3
> >>> +
> >>> +#define COLOR_16BIT_CFG_1 0x0
> >>> +#define COLOR_16BIT_CFG_2 0x1
> >>> +#define COLOR_16BIT_CFG_3 0x2
> >>> +#define COLOR_18BIT_CFG_1 0x3
> >>> +#define COLOR_18BIT_CFG_2 0x4
> >>> +#define COLOR_24BIT 0x5
> >>> +#define COLOR_20BIT_LOOSE 0x6
> >>> +#define COLOR_24_BIT_YCBCR 0x7
> >>> +#define COLOR_16BIT_YCBCR 0x8
> >>> +#define COLOR_30BIT 0x9
> >>> +#define COLOR_36BIT 0xa
> >>> +#define COLOR_12BIT 0xb
> >>> +#define COLOR_RGB_111 0xc
> >>> +#define COLOR_RGB_332 0xd
> >>> +#define COLOR_RGB_444 0xe
> >>> +
> >>> +/* MIPI DSI Relative REGISTERs Definitions */
> >>> +/* For MIPI_DSI_TOP_CNTL */
> >>> +#define BIT_DPI_COLOR_MODE 20
> >>> +#define BIT_IN_COLOR_MODE 16
> >>> +#define BIT_CHROMA_SUBSAMPLE 14
> >>> +#define BIT_COMP2_SEL 12
> >>> +#define BIT_COMP1_SEL 10
> >>> +#define BIT_COMP0_SEL 8
> >>> +#define BIT_DE_POL 6
> >>> +#define BIT_HSYNC_POL 5
> >>> +#define BIT_VSYNC_POL 4
> >>> +#define BIT_DPICOLORM 3
> >>> +#define BIT_DPISHUTDN 2
> >>> +#define BIT_EDPITE_INTR_PULSE 1
> >>> +#define BIT_ERR_INTR_PULSE 0
> >>> +
> >>> +/* HHI Registers */
> >>> +#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */
> >>> +#define VCLK2_DIV_MASK 0xff
> >>> +#define VCLK2_DIV_EN BIT(16)
> >>> +#define VCLK2_DIV_RESET BIT(17)
> >>> +#define CTS_ENCL_SEL_MASK (0xf << 12)
> >>> +#define CTS_ENCL_SEL_SHIFT 12
> >>> +#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */
> >>> +#define VCLK2_EN BIT(19)
> >>> +#define VCLK2_SEL_MASK (0x7 << 16)
> >>> +#define VCLK2_SEL_SHIFT 16
> >>> +#define VCLK2_SOFT_RESET BIT(15)
> >>> +#define VCLK2_DIV1_EN BIT(0)
> >>> +#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */
> >>> +#define CTS_ENCL_EN BIT(3)
> >>> +
> >>> +/**
> >>> + * DOC: MIPI DSI
> >>> + *
> >>> + */
> >>> +
> >>> +struct meson_dw_mipi_dsi {
> >>> + struct drm_encoder encoder;
> >>> + struct meson_drm *priv;
> >>> + struct device *dev;
> >>> + void __iomem *base;
> >>> + struct phy *phy;
> >>> + union phy_configure_opts phy_opts;
> >>> + struct dw_mipi_dsi *dmd;
> >>> + struct dw_mipi_dsi_plat_data pdata;
> >>> + struct mipi_dsi_device *dsi_device;
> >>> + unsigned long mode_flags;
> >>> + struct clk *px_clk;
> >>> +};
> >>> +#define encoder_to_meson_dw_mipi_dsi(x) \
> >>> + container_of(x, struct meson_dw_mipi_dsi, encoder)
> >>> +
> >>> +static void dw_mipi_dsi_set_vclk(struct meson_dw_mipi_dsi *mipi_dsi,
> >>> + struct drm_display_mode *mode)
> >>> +{
> >>> + struct meson_drm *priv = mipi_dsi->priv;
> >>> + unsigned int vclk2_div;
> >>> + unsigned int pll_rate;
> >>> + int ret;
> >>> +
> >>> + pll_rate = mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate;
> >>> + vclk2_div = pll_rate / (mode->clock * 1000);
> >>> +
> >>> + ret = clk_set_rate(mipi_dsi->px_clk, pll_rate);
> >>> + if (ret) {
> >>> + pr_err("Failed to set DSI PLL rate %lu\n",
> >>> + mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate);
> >>> +
> >>> + return;
> >>> + }
> >>> +
> >>> + /* Disable VCLK2 */
> >>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_EN, 0);
> >>> +
> >>> + /* Setup the VCLK2 divider value */
> >>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV,
> >>> + VCLK2_DIV_MASK, (vclk2_div - 1));
> >>> +
> >>> + /* select gp0 for vclk2 */
> >>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
> >>> + VCLK2_SEL_MASK, (0 << VCLK2_SEL_SHIFT));
> >>> +
> >>> + /* enable vclk2 gate */
> >>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL, VCLK2_EN, VCLK2_EN);
> >>> +
> >>> + /* select vclk2_div1 for encl */
> >>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV,
> >>> + CTS_ENCL_SEL_MASK, (8 << CTS_ENCL_SEL_SHIFT));
> >>> +
> >>> + /* release vclk2_div_reset and enable vclk2_div */
> >>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_DIV,
> >>> + VCLK2_DIV_EN | VCLK2_DIV_RESET, VCLK2_DIV_EN);
> >>> +
> >>> + /* enable vclk2_div1 gate */
> >>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
> >>> + VCLK2_DIV1_EN, VCLK2_DIV1_EN);
> >>> +
> >>> + /* reset vclk2 */
> >>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
> >>> + VCLK2_SOFT_RESET, VCLK2_SOFT_RESET);
> >>> + regmap_update_bits(priv->hhi, HHI_VIID_CLK_CNTL,
> >>> + VCLK2_SOFT_RESET, 0);
> >>> +
> >>> + /* enable encl_clk */
> >>> + regmap_update_bits(priv->hhi, HHI_VID_CLK_CNTL2,
> >>> + CTS_ENCL_EN, CTS_ENCL_EN);
> >>> +
> >>> + usleep_range(10000, 11000);
> >>> +}
> >>> +
> >>> +static int dw_mipi_dsi_phy_init(void *priv_data)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
> >>> + struct meson_drm *priv = mipi_dsi->priv;
> >>> +
> >>> +
> >>> + phy_power_on(mipi_dsi->phy);
> >>> +
> >>> + writel_relaxed(1, priv->io_base + _REG(ENCL_VIDEO_EN));
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static void dw_mipi_dsi_phy_power_off(void *priv_data)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
> >>> +
> >>> + phy_power_off(mipi_dsi->phy);
> >>> +}
> >>> +
> >>> +static int
> >>> +dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
> >>> + unsigned long mode_flags, u32 lanes, u32 format,
> >>> + unsigned int *lane_mbps)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
> >>> +
> >>> + *lane_mbps = mipi_dsi->phy_opts.mipi_dphy.hs_clk_rate / 1000000;
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int
> >>> +dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
> >>> + struct dw_mipi_dsi_dphy_timing *timing)
> >>> +{
> >>> + /* TOFIX handle other cases */
> >>> +
> >>> + timing->clk_lp2hs = 37;
> >>> + timing->clk_hs2lp = 135;
> >>> + timing->data_lp2hs = 50;
> >>> + timing->data_hs2lp = 3;
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int
> >>> +dw_mipi_dsi_get_esc_clk_rate(void *priv_data, unsigned int *esc_clk_rate)
> >>> +{
> >>> + *esc_clk_rate = 4; /* Mhz */
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static const struct dw_mipi_dsi_phy_ops meson_dw_mipi_dsi_phy_ops = {
> >>> + .init = dw_mipi_dsi_phy_init,
> >>> + .power_off = dw_mipi_dsi_phy_power_off,
> >>> + .get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
> >>> + .get_timing = dw_mipi_dsi_phy_get_timing,
> >>> + .get_esc_clk_rate = dw_mipi_dsi_get_esc_clk_rate,
> >>> +};
> >>> +
> >>> +/* Encoder */
> >>> +
> >>> +static void meson_mipi_dsi_encoder_destroy(struct drm_encoder *encoder)
> >>> +{
> >>> + drm_encoder_cleanup(encoder);
> >>> +}
> >>> +
> >>> +static const struct drm_encoder_funcs meson_mipi_dsi_encoder_funcs = {
> >>> + .destroy = meson_mipi_dsi_encoder_destroy,
> >>> +};
> >>> +
> >>> +static int meson_mipi_dsi_encoder_atomic_check(struct drm_encoder *encoder,
> >>> + struct drm_crtc_state *crtc_state,
> >>> + struct drm_connector_state *conn_state)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi =
> >>> + encoder_to_meson_dw_mipi_dsi(encoder);
> >>> +
> >>> + switch (mipi_dsi->dsi_device->format) {
> >>> + case MIPI_DSI_FMT_RGB888:
> >>> + break;
> >>> + case MIPI_DSI_FMT_RGB666:
> >>> + break;
> >>> + case MIPI_DSI_FMT_RGB666_PACKED:
> >>> + case MIPI_DSI_FMT_RGB565:
> >>> + default:
> >>> + DRM_DEV_ERROR(mipi_dsi->dev,
> >>> + "invalid pixel format %d\n",
> >>> + mipi_dsi->dsi_device->format);
> >>> + return -EINVAL;
> >>> + };
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static void meson_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi =
> >>> + encoder_to_meson_dw_mipi_dsi(encoder);
> >>> + struct meson_drm *priv = mipi_dsi->priv;
> >>> +
> >>> + writel_relaxed(0, priv->io_base + _REG(ENCL_VIDEO_EN));
> >>> +}
> >>> +
> >>> +static void meson_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi =
> >>> + encoder_to_meson_dw_mipi_dsi(encoder);
> >>> + struct meson_drm *priv = mipi_dsi->priv;
> >>> +
> >>> + writel_bits_relaxed(BIT(3), BIT(3),
> >>> + priv->io_base + _REG(ENCL_VIDEO_MODE_ADV));
> >>> + writel_relaxed(0, priv->io_base + _REG(ENCL_TST_EN));
> >>> +}
> >>> +
> >>> +static void meson_dw_mipi_dsi_init(struct meson_dw_mipi_dsi *mipi_dsi)
> >>> +{
> >>> + writel_relaxed((1 << 4) | (1 << 5) | (0 << 6),
> >>> + mipi_dsi->base + MIPI_DSI_TOP_CNTL);
> >>> +
> >>> + writel_bits_relaxed(0xf, 0xf,
> >>> + mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
> >>> + writel_bits_relaxed(0xf, 0,
> >>> + mipi_dsi->base + MIPI_DSI_TOP_SW_RESET);
> >>> +
> >>> + writel_bits_relaxed(0x3, 0x3,
> >>> + mipi_dsi->base + MIPI_DSI_TOP_CLK_CNTL);
> >>> +
> >>> + writel_relaxed(0, mipi_dsi->base + MIPI_DSI_TOP_MEM_PD);
> >>> +}
> >>> +
> >>> +static void meson_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
> >>> + struct drm_display_mode *mode,
> >>> + struct drm_display_mode *adjusted_mode)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi = encoder_to_meson_dw_mipi_dsi(encoder);
> >>> + unsigned int dpi_data_format, venc_data_width;
> >>> + struct meson_drm *priv = mipi_dsi->priv;
> >>> + int bpp;
> >>> + u32 reg;
> >>> +
> >>> + mipi_dsi->mode_flags = mode->flags;
> >>> +
> >>> + bpp = mipi_dsi_pixel_format_to_bpp(mipi_dsi->dsi_device->format);
> >>> +
> >>> + phy_mipi_dphy_get_default_config(mode->clock * 1000,
> >>> + bpp, mipi_dsi->dsi_device->lanes,
> >>> + &mipi_dsi->phy_opts.mipi_dphy);
> >>> +
> >>> + phy_configure(mipi_dsi->phy, &mipi_dsi->phy_opts);
> >>> +
> >>> + switch (mipi_dsi->dsi_device->format) {
> >>> + case MIPI_DSI_FMT_RGB888:
> >>> + dpi_data_format = COLOR_24BIT;
> >>> + venc_data_width = MIPI_DSI_VENC_COLOR_24B;
> >>> + break;
> >>> + case MIPI_DSI_FMT_RGB666:
> >>> + dpi_data_format = COLOR_18BIT_CFG_2;
> >>> + venc_data_width = MIPI_DSI_VENC_COLOR_18B;
> >>> + break;
> >>> + case MIPI_DSI_FMT_RGB666_PACKED:
> >>> + case MIPI_DSI_FMT_RGB565:
> >>> + /* invalid */
> >>> + break;
> >>> + };
> >>> +
> >>> + dw_mipi_dsi_set_vclk(mipi_dsi, mode);
> >>> + meson_venc_mipi_dsi_mode_set(priv, mode);
> >>> +
> >>> + meson_encl_load_gamma(priv);
> >>> +
> >>> + writel_relaxed(0, priv->io_base + _REG(ENCL_VIDEO_EN));
> >>> +
> >>> + meson_dw_mipi_dsi_init(mipi_dsi);
> >>> +
> >>> + /* Configure Set color format for DPI register */
> >>> + reg = readl_relaxed(mipi_dsi->base + MIPI_DSI_TOP_CNTL) &
> >>> + ~(0xf<<BIT_DPI_COLOR_MODE) &
> >>> + ~(0x7<<BIT_IN_COLOR_MODE) &
> >>> + ~(0x3<<BIT_CHROMA_SUBSAMPLE);
> >>> +
> >>> + writel_relaxed(reg |
> >>> + (dpi_data_format << BIT_DPI_COLOR_MODE) |
> >>> + (venc_data_width << BIT_IN_COLOR_MODE) |
> >>> + 0 << BIT_COMP0_SEL |
> >>> + 1 << BIT_COMP1_SEL |
> >>> + 2 << BIT_COMP2_SEL |
> >>> + (mipi_dsi->mode_flags & DRM_MODE_FLAG_NHSYNC ? 0 : BIT(BIT_HSYNC_POL)) |
> >>> + (mipi_dsi->mode_flags & DRM_MODE_FLAG_NVSYNC ? 0 : BIT(BIT_VSYNC_POL)),
> >>> + mipi_dsi->base + MIPI_DSI_TOP_CNTL);
> >>> +}
> >>> +
> >>> +static const struct drm_encoder_helper_funcs
> >>> + meson_mipi_dsi_encoder_helper_funcs = {
> >>> + .atomic_check = meson_mipi_dsi_encoder_atomic_check,
> >>> + .disable = meson_mipi_dsi_encoder_disable,
> >>> + .enable = meson_mipi_dsi_encoder_enable,
> >>> + .mode_set = meson_mipi_dsi_encoder_mode_set,
> >>> +};
> >>> +
> >>> +static int meson_dw_mipi_dsi_bind(struct device *dev, struct device *master,
> >>> + void *data)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi = dev_get_drvdata(dev);
> >>> + struct drm_device *drm = data;
> >>> + struct meson_drm *priv = drm->dev_private;
> >>> + struct drm_encoder *encoder;
> >>> + int ret;
> >>> +
> >>> + /* Check before if we are supposed to have a sub-device... */
> >>> + if (!mipi_dsi->dsi_device)
> >>> + return -EPROBE_DEFER;
> >>> +
> >>> + encoder = &mipi_dsi->encoder;
> >>> + mipi_dsi->priv = priv;
> >>> +
> >>> + /* Encoder */
> >>> + ret = drm_encoder_init(drm, encoder, &meson_mipi_dsi_encoder_funcs,
> >>> + DRM_MODE_ENCODER_DSI, "meson_mipi_dsi");
> >>> + if (ret) {
> >>> + dev_err(priv->dev, "Failed to init DSI encoder\n");
> >>> + return ret;
> >>> + }
> >>> +
> >>> + drm_encoder_helper_add(encoder, &meson_mipi_dsi_encoder_helper_funcs);
> >>> +
> >>> + encoder->possible_crtcs = BIT(0);
> >>> +
> >>> + ret = dw_mipi_dsi_bind(mipi_dsi->dmd, encoder);
> >>> + if (ret) {
> >>> + DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret);
> >>> + return ret;
> >>> + }
> >>> +
> >>> + phy_init(mipi_dsi->phy);
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static void meson_dw_mipi_dsi_unbind(struct device *dev, struct device *master,
> >>> + void *data)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi = dev_get_drvdata(dev);
> >>> +
> >>> + dw_mipi_dsi_remove(mipi_dsi->dmd);
> >>> +
> >>> + phy_exit(mipi_dsi->phy);
> >>> +}
> >>> +
> >>> +static const struct component_ops meson_dw_mipi_dsi_ops = {
> >>> + .bind = meson_dw_mipi_dsi_bind,
> >>> + .unbind = meson_dw_mipi_dsi_unbind,
> >>> +};
> >>> +
> >>> +static int meson_dw_mipi_dsi_host_attach(void *priv_data,
> >>> + struct mipi_dsi_device *device)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
> >>> +
> >>> + mipi_dsi->dsi_device = device;
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int meson_dw_mipi_dsi_host_detach(void *priv_data,
> >>> + struct mipi_dsi_device *device)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi = priv_data;
> >>> +
> >>> + if (device == mipi_dsi->dsi_device)
> >>> + mipi_dsi->dsi_device = NULL;
> >>> + else
> >>> + return -EINVAL;
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static const struct dw_mipi_dsi_host_ops meson_dw_mipi_dsi_host_ops = {
> >>> + .attach = meson_dw_mipi_dsi_host_attach,
> >>> + .detach = meson_dw_mipi_dsi_host_detach,
> >>> +};
> >>> +
> >>> +static int meson_dw_mipi_dsi_probe(struct platform_device *pdev)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi;
> >>> + struct reset_control *top_rst;
> >>> + struct resource *res;
> >>> + int ret;
> >>> +
> >>> + mipi_dsi = devm_kzalloc(&pdev->dev, sizeof(*mipi_dsi), GFP_KERNEL);
> >>> + if (!mipi_dsi)
> >>> + return -ENOMEM;
> >>> +
> >>> + mipi_dsi->dev = &pdev->dev;
> >>> +
> >>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >>> + mipi_dsi->base = devm_ioremap_resource(&pdev->dev, res);
> >>> + if (IS_ERR(mipi_dsi->base))
> >>> + return PTR_ERR(mipi_dsi->base);
> >>> +
> >>> + mipi_dsi->phy = devm_phy_get(&pdev->dev, "dphy");
> >>> + if (IS_ERR(mipi_dsi->phy)) {
> >>> + ret = PTR_ERR(mipi_dsi->phy);
> >>> + dev_err(&pdev->dev, "failed to get mipi dphy: %d\n", ret);
> >>> + return ret;
> >>> + }
> >>> +
> >>> + mipi_dsi->px_clk = devm_clk_get(&pdev->dev, "px_clk");
> >>> + if (IS_ERR(mipi_dsi->px_clk)) {
> >>> + dev_err(&pdev->dev, "Unable to get PLL clk\n");
> >>> + return PTR_ERR(mipi_dsi->px_clk);
> >>> + }
> >>> +
> >>> + /*
> >>> + * We use a TOP reset signal because the APB reset signal
> >>> + * is handled by the TOP control registers.
> >>> + */
> >>> + top_rst = devm_reset_control_get_exclusive(&pdev->dev, "top");
> >>> + if (IS_ERR(top_rst)) {
> >>> + ret = PTR_ERR(top_rst);
> >>> +
> >>> + if (ret != -EPROBE_DEFER)
> >>> + dev_err(&pdev->dev, "Unable to get reset control: %d\n", ret);
> >>> +
> >>> + return ret;
> >>> + }
> >>> +
> >>> + ret = clk_prepare_enable(mipi_dsi->px_clk);
> >>> + if (ret) {
> >>> + dev_err(&pdev->dev, "Unable to prepare/enable PX clock\n");
> >>> + goto err_clkdisable;
> >>> + }
> >>> +
> >>> + reset_control_assert(top_rst);
> >>> + usleep_range(10, 20);
> >>> + reset_control_deassert(top_rst);
> >>> +
> >>> + /* MIPI DSI Controller */
> >>> +
> >>> + mipi_dsi->pdata.base = mipi_dsi->base;
> >>> + mipi_dsi->pdata.max_data_lanes = 4;
> >>> + mipi_dsi->pdata.phy_ops = &meson_dw_mipi_dsi_phy_ops;
> >>> + mipi_dsi->pdata.host_ops = &meson_dw_mipi_dsi_host_ops;
> >>> + mipi_dsi->pdata.priv_data = mipi_dsi;
> >>> + platform_set_drvdata(pdev, mipi_dsi);
> >>> +
> >>> + mipi_dsi->dmd = dw_mipi_dsi_probe(pdev, &mipi_dsi->pdata);
> >>> + if (IS_ERR(mipi_dsi->dmd)) {
> >>> + ret = PTR_ERR(mipi_dsi->dmd);
> >>> + if (ret != -EPROBE_DEFER)
> >>> + dev_err(&pdev->dev,
> >>> + "Failed to probe dw_mipi_dsi: %d\n", ret);
> >>> + goto err_clkdisable;
> >>> + }
> >>> +
> >>> + return component_add(mipi_dsi->dev, &meson_dw_mipi_dsi_ops);
> >>> +
> >>> +err_clkdisable:
> >>> + clk_disable_unprepare(mipi_dsi->px_clk);
> >>> +
> >>> + return ret;
> >>> +}
> >>> +
> >>> +static int meson_dw_mipi_dsi_remove(struct platform_device *pdev)
> >>> +{
> >>> + struct meson_dw_mipi_dsi *mipi_dsi = dev_get_drvdata(&pdev->dev);
> >>> +
> >>> + component_del(mipi_dsi->dev, &meson_dw_mipi_dsi_ops);
> >>> +
> >>> + clk_disable_unprepare(mipi_dsi->px_clk);
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static const struct of_device_id meson_dw_mipi_dsi_of_table[] = {
> >>> + { .compatible = "amlogic,meson-axg-dw-mipi-dsi", },
> >>> + { }
> >>> +};
> >>> +MODULE_DEVICE_TABLE(of, meson_dw_mipi_dsi_of_table);
> >>> +
> >>> +static struct platform_driver meson_dw_mipi_dsi_platform_driver = {
> >>> + .probe = meson_dw_mipi_dsi_probe,
> >>> + .remove = meson_dw_mipi_dsi_remove,
> >>> + .driver = {
> >>> + .name = DRIVER_NAME,
> >>> + .of_match_table = meson_dw_mipi_dsi_of_table,
> >>> + },
> >>> +};
> >>> +module_platform_driver(meson_dw_mipi_dsi_platform_driver);
> >>> +
> >>> +MODULE_AUTHOR("Neil Armstrong <narmstrong at baylibre.com>");
> >>> +MODULE_DESCRIPTION(DRIVER_DESC);
> >>> +MODULE_LICENSE("GPL");
> >>> --
> >>> 2.22.0
> >>>
> >>
> >> --
> >> Daniel Vetter
> >> Software Engineer, Intel Corporation
> >> http://blog.ffwll.ch
> >
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list