[PATCH v2 08/10] arm64: dts: renesas: r8a77961: Add HDMI device nodes

[Laurent Pinchart]

Hi Morimoto-san,

Thank you for the patch.

On Tue, Sep 08, 2020 at 09:35:15AM +0900, Kuninori Morimoto wrote:
> 
> From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
> 
> This patch adds HDMI device nodes for R-Car M3-W+ (r8a77961) SoC.
> This patch was tested on R-Car M3-W+ Salvator-XS board.
> 
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
>  arch/arm64/boot/dts/renesas/r8a77961.dtsi | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
> index c7fabd9e875b..7f21491f6436 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
> @@ -2145,14 +2145,23 @@ port at 1 {
>  		};
>  
>  		hdmi0: hdmi at fead0000 {
> +			compatible = "renesas,r8a77961-hdmi", "renesas,rcar-gen3-hdmi";
>  			reg = <0 0xfead0000 0 0x10000>;
> -			/* placeholder */
> +			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE R8A77961_CLK_HDMI>;
> +			clock-names = "iahb", "isfr";
> +			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
> +			resets = <&cpg 729>;
> +			status = "disabled";
>  
>  			ports {
>  				#address-cells = <1>;
>  				#size-cells = <0>;
>  				port at 0 {
>  					reg = <0>;
> +					dw_hdmi0_in: endpoint {
> +						remote-endpoint = <&du_out_hdmi0>;
> +					};
>  				};
>  				port at 1 {
>  					reg = <1>;
> @@ -2191,6 +2200,7 @@ du_out_rgb: endpoint {
>  				port at 1 {
>  					reg = <1>;
>  					du_out_hdmi0: endpoint {
> +						remote-endpoint = <&dw_hdmi0_in>;
>  					};
>  				};
>  				port at 2 {

-- 
Regards,

Laurent Pinchart