[PATCH 5/5] drm_dp_cec: add the implementation of MST support
Hans Verkuil
hverkuil at xs4all.nl
Tue Sep 8 09:24:59 UTC 2020
On 01/09/2020 08:22, Sam McNally wrote:
> With DP v2.0 errata E5, CEC tunneling can be supported through an MST
> topology.
>
> There are some minor differences for CEC tunneling through an MST
> topology compared to CEC tunneling to an SST port:
> - CEC IRQs are delivered via a sink event notify message
> - CEC-related DPCD registers are accessed via remote DPCD reads and
> writes.
>
> This results in the MST implementation diverging from the existing SST
> implementation:
> - sink event notify messages with CEC_IRQ ID set indicate CEC IRQ rather
> than ESI1
> - setting edid and handling CEC IRQs, which can be triggered from
> contexts where locks held preclude HPD handling, are deferred to avoid
> remote DPCD access which would block until HPD handling is performed
> or a timeout
>
> Register and unregister for all MST connectors, ensuring their
> drm_dp_aux_cec struct won't be accessed uninitialized.
>
> Signed-off-by: Sam McNally <sammc at chromium.org>
> ---
>
> drivers/gpu/drm/drm_dp_cec.c | 67 +++++++++++++++++++++++++--
> drivers/gpu/drm/drm_dp_mst_topology.c | 24 ++++++++++
> include/drm/drm_dp_helper.h | 4 ++
> 3 files changed, 90 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_cec.c b/drivers/gpu/drm/drm_dp_cec.c
> index 04ab7b88055c..9f6aeaa27f00 100644
> --- a/drivers/gpu/drm/drm_dp_cec.c
> +++ b/drivers/gpu/drm/drm_dp_cec.c
> @@ -249,6 +249,10 @@ void drm_dp_cec_irq(struct drm_dp_aux *aux)
> if (!aux->transfer)
> return;
>
> + if (aux->cec.is_mst) {
> + schedule_work(&aux->cec.mst_irq_work);
> + return;
> + }
> mutex_lock(&aux->cec.lock);
> if (!aux->cec.adap)
> goto unlock;
> @@ -277,6 +281,24 @@ static bool drm_dp_cec_cap(struct drm_dp_aux *aux, u8 *cec_cap)
> return true;
> }
>
> +static void drm_dp_cec_mst_irq_work(struct work_struct *work)
> +{
> + struct drm_dp_aux *aux = container_of(work, struct drm_dp_aux,
> + cec.mst_irq_work);
> + struct drm_dp_mst_port *port =
> + container_of(aux, struct drm_dp_mst_port, aux);
> +
> + port = drm_dp_mst_topology_get_port_validated(port->mgr, port);
> + if (!port)
> + return;
> + mutex_lock(&aux->cec.lock);
> + if (aux->cec.adap)
> + drm_dp_cec_handle_irq(aux);
> +
Nitpick: this empty line feels unbalanced. It makes more sense to add
an empty line just before the mutex_lock() and remove this one.
> + mutex_unlock(&aux->cec.lock);
> + drm_dp_mst_topology_put_port(port);
> +}
> +
> /*
> * Called if the HPD was low for more than drm_dp_cec_unregister_delay
> * seconds. This unregisters the CEC adapter.
> @@ -298,7 +320,8 @@ static void drm_dp_cec_unregister_work(struct work_struct *work)
> * were unchanged and just update the CEC physical address. Otherwise
> * unregister the old CEC adapter and create a new one.
> */
> -void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid)
> +static void drm_dp_cec_handle_set_edid(struct drm_dp_aux *aux,
> + const struct edid *edid)
> {
> struct drm_connector *connector = aux->cec.connector;
> u32 cec_caps = CEC_CAP_DEFAULTS | CEC_CAP_NEEDS_HPD |
> @@ -307,10 +330,6 @@ void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid)
> unsigned int num_las = 1;
> u8 cap;
>
> - /* No transfer function was set, so not a DP connector */
> - if (!aux->transfer)
> - return;
> -
> #ifndef CONFIG_MEDIA_CEC_RC
> /*
> * CEC_CAP_RC is part of CEC_CAP_DEFAULTS, but it is stripped by
> @@ -321,6 +340,7 @@ void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid)
> */
> cec_caps &= ~CEC_CAP_RC;
> #endif
> + cancel_work_sync(&aux->cec.mst_irq_work);
> cancel_delayed_work_sync(&aux->cec.unregister_work);
>
> mutex_lock(&aux->cec.lock);
> @@ -375,6 +395,18 @@ void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid)
> }
> mutex_unlock(&aux->cec.lock);
> }
> +
> +void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid)
> +{
> + /* No transfer function was set, so not a DP connector */
> + if (!aux->transfer)
> + return;
> +
> + if (aux->cec.is_mst)
> + schedule_work(&aux->cec.mst_set_edid_work);
> + else
> + drm_dp_cec_handle_set_edid(aux, edid);
> +}
> EXPORT_SYMBOL(drm_dp_cec_set_edid);
>
> /*
> @@ -393,6 +425,8 @@ void drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
> goto unlock;
>
> cec_phys_addr_invalidate(aux->cec.adap);
> + cancel_work_sync(&aux->cec.mst_irq_work);
I'd swap these two lines. It's a bit more robust.
Shouldn't this also cancel cec.mst_set_edid_work?
> +
> /*
> * We're done if we want to keep the CEC device
> * (drm_dp_cec_unregister_delay is >= NEVER_UNREG_DELAY) or if the
> @@ -414,6 +448,25 @@ void drm_dp_cec_unset_edid(struct drm_dp_aux *aux)
> }
> EXPORT_SYMBOL(drm_dp_cec_unset_edid);
>
> +static void drm_dp_cec_mst_set_edid_work(struct work_struct *work)
It's a bit weird to have this function appear after the drm_dp_cec_unset_edid()
function. Wouldn't it be better to move it to just before drm_dp_cec_set_edid()?
That way all the 'set_edid()' functions are grouped together.
Regards,
Hans
> +{
> + struct drm_dp_aux *aux =
> + container_of(work, struct drm_dp_aux, cec.mst_set_edid_work);
> + struct drm_dp_mst_port *port =
> + container_of(aux, struct drm_dp_mst_port, aux);
> + struct edid *edid = NULL;
> +
> + port = drm_dp_mst_topology_get_port_validated(port->mgr, port);
> + if (!port)
> + return;
> +
> + edid = drm_get_edid(port->connector, &port->aux.ddc);
> +
> + drm_dp_cec_handle_set_edid(aux, edid);
> +
> + drm_dp_mst_topology_put_port(port);
> +}
> +
> /**
> * drm_dp_cec_register_connector() - register a new connector
> * @aux: DisplayPort AUX channel
> @@ -435,6 +488,8 @@ void drm_dp_cec_register_connector(struct drm_dp_aux *aux,
> aux->cec.is_mst = is_mst;
> INIT_DELAYED_WORK(&aux->cec.unregister_work,
> drm_dp_cec_unregister_work);
> + INIT_WORK(&aux->cec.mst_irq_work, drm_dp_cec_mst_irq_work);
> + INIT_WORK(&aux->cec.mst_set_edid_work, drm_dp_cec_mst_set_edid_work);
> }
> EXPORT_SYMBOL(drm_dp_cec_register_connector);
>
> @@ -444,6 +499,8 @@ EXPORT_SYMBOL(drm_dp_cec_register_connector);
> */
> void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux)
> {
> + cancel_work_sync(&aux->cec.mst_irq_work);
> + cancel_work_sync(&aux->cec.mst_set_edid_work);
> if (!aux->cec.adap)
> return;
> cancel_delayed_work_sync(&aux->cec.unregister_work);
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> index c783a2a1c114..fd9430d88fd6 100644
> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> @@ -2183,6 +2183,8 @@ static void build_mst_prop_path(const struct drm_dp_mst_branch *mstb,
> int drm_dp_mst_connector_late_register(struct drm_connector *connector,
> struct drm_dp_mst_port *port)
> {
> + drm_dp_cec_register_connector(&port->aux, connector, true);
> +
> DRM_DEBUG_KMS("registering %s remote bus for %s\n",
> port->aux.name, connector->kdev->kobj.name);
>
> @@ -2206,6 +2208,8 @@ void drm_dp_mst_connector_early_unregister(struct drm_connector *connector,
> DRM_DEBUG_KMS("unregistering %s remote bus for %s\n",
> port->aux.name, connector->kdev->kobj.name);
> drm_dp_aux_unregister_devnode(&port->aux);
> +
> + drm_dp_cec_unregister_connector(&port->aux);
> }
> EXPORT_SYMBOL(drm_dp_mst_connector_early_unregister);
>
> @@ -2515,6 +2519,21 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,
> queue_work(system_long_wq, &mstb->mgr->work);
> }
>
> +static void
> +drm_dp_mst_handle_sink_event(struct drm_dp_mst_branch *mstb,
> + struct drm_dp_sink_event_notify *sink_event)
> +{
> + struct drm_dp_mst_port *port;
> +
> + if (sink_event->event_id & DP_SINK_EVENT_CEC_IRQ_EVENT) {
> + port = drm_dp_get_port(mstb, sink_event->port_number);
> + if (port) {
> + drm_dp_cec_irq(&port->aux);
> + drm_dp_mst_topology_put_port(port);
> + }
> + }
> +}
> +
> static struct drm_dp_mst_branch *drm_dp_get_mst_branch_device(struct drm_dp_mst_topology_mgr *mgr,
> u8 lct, u8 *rad)
> {
> @@ -3954,6 +3973,8 @@ drm_dp_mst_process_up_req(struct drm_dp_mst_topology_mgr *mgr,
> if (msg->req_type == DP_CONNECTION_STATUS_NOTIFY) {
> drm_dp_mst_handle_conn_stat(mstb, &msg->u.conn_stat);
> hotplug = true;
> + } else if (msg->req_type == DP_SINK_EVENT_NOTIFY) {
> + drm_dp_mst_handle_sink_event(mstb, &msg->u.sink_event);
> }
>
> drm_dp_mst_topology_put_mstb(mstb);
> @@ -4147,6 +4168,8 @@ drm_dp_mst_detect_port(struct drm_connector *connector,
> break;
> }
> out:
> + if (ret != connector_status_connected)
> + drm_dp_cec_unset_edid(&port->aux);
> drm_dp_mst_topology_put_port(port);
> return ret;
> }
> @@ -4177,6 +4200,7 @@ struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_
> edid = drm_get_edid(connector, &port->aux.ddc);
> }
> port->has_audio = drm_detect_monitor_audio(edid);
> + drm_dp_cec_set_edid(&port->aux, edid);
> drm_dp_mst_topology_put_port(port);
> return edid;
> }
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 12bca1b9512b..e973eba06875 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -1497,6 +1497,8 @@ struct drm_connector;
> * @connector: the connector this CEC adapter is associated with
> * @is_mst: this is an MST branch
> * @unregister_work: unregister the CEC adapter
> + * @mst_irq_work: IRQ for CEC events on an MST branch
> + * @mst_set_edid_work: set the EDID for an MST branch
> */
> struct drm_dp_aux_cec {
> struct mutex lock;
> @@ -1504,6 +1506,8 @@ struct drm_dp_aux_cec {
> struct drm_connector *connector;
> bool is_mst;
> struct delayed_work unregister_work;
> + struct work_struct mst_irq_work;
> + struct work_struct mst_set_edid_work;
> };
>
> /**
>
More information about the dri-devel
mailing list