[PATCH v9 0/5] Add support for iMX8MQ Display Controller Subsystem
Daniel Vetter
daniel at ffwll.ch
Thu Sep 10 06:47:34 UTC 2020
On Wed, Sep 9, 2020 at 5:03 PM Lucas Stach <l.stach at pengutronix.de> wrote:
>
> Hi Laurentiu,
>
> On Mo, 2020-08-31 at 14:24 +0300, Laurentiu Palcu wrote:
> > Hi Lucas, Sam,
> >
> > On Mon, Aug 31, 2020 at 12:37:23PM +0200, Lucas Stach wrote:
> > > Hi Laurentiu,
> > >
> > > On Fr, 2020-08-28 at 11:36 +0300, Laurentiu Palcu wrote:
> > > > Hi Lucas,
> > > >
> > > > I was wondering about the plans to merge this series. Since not many
> > > > people can test it properly due to lack of DCSS support in the upstream
> > > > NWL driver (which I heard it's coming soon) and a completely nonexistent
> > > > HDP driver, are we going to take a leap of faith and merge it as is? Or
> > > > should we wait?
> > >
> > > I think even if the bridges aren't ready yet, the driver is in a good
> > > enough shape to merge it. There's no point in letting it accumulate
> > > bitrot while waiting for the bridges to land. Also I guess it will make
> > > bridge driver development a lot easier when the DCSS driver is in-tree.
> >
> > OK, fair enough.
> >
> > > > As to who is going to do the actual merge, I know we had a brief
> > > > discussion about it some time ago and I was supposed to apply for
> > > > drm-misc rights, however it feels a little awkward to merge my own
> > > > code... :) Though, I might not even qualify for drm-misc rights anyway,
> > > > considering I haven't been very active in this area... :/
> > >
> > > Please consider applying for drm-misc merge rights. Even if you don't
> > > do the initial merge I think it will come in handy in the long run.
> >
> > OK, I'll apply for drm-misc rights. Sam also encouraged me to do this in
> > a previous email. Since this series will be followed by a bunch of other
> > patches, enabling support for video planes, among other things, I guess
> > I'll need the rights anyway.
> >
> > > > On that note, I will probably need help with the merging, provided it's
> > > > still happenning. Will you be able to help me out with this?
> > >
> > > Sure, I'm having some time available this week. I'll give this v9
> > > another spin on my boards and will do the merge after that.
> >
> > Thanks Lucas. As a matter of fact, after Sam's email, I was preparing a
> > v10 after rebasing to latest drm-next. However, no conflicts were encountered
> > and the v9 series applied cleanly. Let me know if you encounter any
> > issues and I can resend it.
>
> I've tested this together with a hacked up eDP bridge driver stack on
> my boards. The testing hasn't been really in-depth, but things seem to
> work fine. I have now pushed the whole series into drm-misc-next.
Something doesn't compile too well
ERROR: modpost: "__aeabi_ldivmod"
[drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
ERROR: modpost: "__aeabi_uldivmod"
[drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
Cheers, Daniel
>
> Regards,
> Lucas
>
> > Thanks,
> > Laurentiu
> >
> > > Regards,
> > > Lucas
> > >
> > > > Thanks,
> > > > laurentiu
> > > >
> > > > On Fri, Jul 31, 2020 at 11:18:28AM +0300, Laurentiu Palcu wrote:
> > > > > From: Laurentiu Palcu <laurentiu.palcu at nxp.com>
> > > > >
> > > > > Hi,
> > > > >
> > > > > This patchset adds initial DCSS support for iMX8MQ chip. Initial support
> > > > > includes only graphics plane support (no video planes), no HDR10 capabilities,
> > > > > no graphics decompression (only linear, tiled and super-tiled buffers allowed).
> > > > >
> > > > > Support for the rest of the features will be added incrementally, in subsequent
> > > > > patches.
> > > > >
> > > > > The patchset was tested with both HDP driver (in the downstream tree) and the upstream
> > > > > MIPI-DSI driver (with a couple of patches on top, to make it work correctly with DCSS).
> > > > >
> > > > > Thanks,
> > > > > Laurentiu
> > > > >
> > > > > Changes in v9:
> > > > > * Fixed a compilation issue found by Guido in his setup: 'select
> > > > > VIDEOMODE_HELPERS' was missing from Kconfig;
> > > > > * Use imx8mq-clock.h in the bindings file so one can understand what
> > > > > those clock values mean;
> > > > > * no other changes done. Couldn't address the hang Guido reported as
> > > > > it's not happening in my setup. However, in my tree, there are some
> > > > > extra NWL and ADV patches applied on top of upstream ones... Also,
> > > > > removing them and testing only with upstream, even if there's no
> > > > > image out, does not produce a hang... :/
> > > > >
> > > > > Changes in v8:
> > > > > * Removed 'select RESET_CONTROLLER" from Kconfig as Philipp pointed
> > > > > out. SRC is not used in DCSS driver;
> > > > > * Nothing else changed;
> > > > >
> > > > > Changes in v7:
> > > > > * Added a patch to initialize the connector using the drm_bridge_connector
> > > > > API as Sam suggested. Tested it using NWL_DSI and ADV7535 with
> > > > > Guido's patch [1] applied and one fix for ADV [2]. Also, some extra
> > > > > patches for ADV and NWL were needed, from our downstream tree, which
> > > > > will be upstreamed soon by their author;
> > > > > * Rest of the patches are untouched;
> > > > >
> > > > > [1] https://lists.freedesktop.org/archives/dri-devel/2020-July/273025.html
> > > > > [2] https://lists.freedesktop.org/archives/dri-devel/2020-July/273132.html
> > > > >
> > > > > Changes in v6:
> > > > > * Addressed Rob's comment and added "additionalProperties: false" at
> > > > > the end of the bindings' properties. However, this change surfaced
> > > > > an issue with the assigned-clock* properties not being documented in
> > > > > the properties section. Added the descriptions and the bindings patch
> > > > > will need another review;
> > > > > * Added an entry for DCSS driver in the MAINTAINERS file;
> > > > > * Removed the component framework patch altogether;
> > > > >
> > > > > Changes in v5:
> > > > > * Rebased to latest;
> > > > > * Took out component framework support and made it a separate patch so
> > > > > that people can still test with HDP driver, which makes use of it.
> > > > > But the idea is to get rid of it once HDP driver's next versions
> > > > > will remove component framework as well;
> > > > > * Slight improvement to modesetting: avoid cutting off the pixel clock
> > > > > if the new mode and the old one are equal. Also, in this case, is
> > > > > not necessary to wait for DTG to shut off. This would allow to switch
> > > > > from 8b RGB to 12b YUV422, for example, with no interruptions (at least
> > > > > from DCSS point of view);
> > > > > * Do not fire off CTXLD when going to suspend, unless it still has
> > > > > entries that need to be committed to DCSS;
> > > > > * Addressed Rob's comments on bindings;
> > > > >
> > > > > Changes in v4:
> > > > > * Addressed Lucas and Philipp's comments:
> > > > > * Added DRM_KMS_CMA_HELPER dependency in Kconfig;
> > > > > * Removed usage of devm_ functions since I'm already doing all the
> > > > > clean-up in the submodules_deinit();
> > > > > * Moved the drm_crtc_arm_vblank_event() in dcss_crtc_atomic_flush();
> > > > > * Removed en_completion variable from dcss_crtc since this was
> > > > > introduced mainly to avoid vblank timeout warnings which were fixed
> > > > > by arming the vblank event in flush() instead of begin();
> > > > > * Removed clks_on and irq_enabled flags since all the calls to
> > > > > enabling/disabling clocks and interrupts were balanced;
> > > > > * Removed the custom atomic_commit callback and used the DRM core
> > > > > helper and, in the process, got rid of a workqueue that wasn't
> > > > > necessary anymore;
> > > > > * Fixed some minor DT binding issues flagged by Philipp;
> > > > > * Some other minor changes suggested by Lucas;
> > > > > * Removed YUV formats from the supported formats as these cannot work
> > > > > without the HDR10 module CSCs and LUTs. Will add them back when I
> > > > > will add support for video planes;
> > > > >
> > > > > Changes in v3:
> > > > > * rebased to latest linux-next and made it compile as drmP.h was
> > > > > removed;
> > > > > * removed the patch adding the VIDEO2_PLL clock. It's already applied;
> > > > > * removed an unnecessary 50ms sleep in the dcss_dtg_sync_set();
> > > > > * fixed a a spurious hang reported by Lukas Hartmann and encountered
> > > > > by me several times;
> > > > > * mask DPR and DTG interrupts by default, as they may come enabled from
> > > > > U-boot;
> > > > >
> > > > > Changes in v2:
> > > > > * Removed '0x' in node's unit-address both in DT and yaml;
> > > > > * Made the address region size lowercase, to be consistent;
> > > > > * Removed some left-over references to P010;
> > > > > * Added a Kconfig dependency of DRM && ARCH_MXC. This will also silence compilation
> > > > > issues reported by kbuild for other architectures;
> > > > >
> > > > >
> > > > > Laurentiu Palcu (5):
> > > > > drm/imx: compile imx directory by default
> > > > > drm/imx: Add initial support for DCSS on iMX8MQ
> > > > > drm/imx/dcss: use drm_bridge_connector API
> > > > > MAINTAINERS: Add entry for i.MX 8MQ DCSS driver
> > > > > dt-bindings: display: imx: add bindings for DCSS
> > > > >
> > > > > .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 108 +++
> > > > > MAINTAINERS | 8 +
> > > > > drivers/gpu/drm/Makefile | 2 +-
> > > > > drivers/gpu/drm/imx/Kconfig | 2 +
> > > > > drivers/gpu/drm/imx/Makefile | 1 +
> > > > > drivers/gpu/drm/imx/dcss/Kconfig | 9 +
> > > > > drivers/gpu/drm/imx/dcss/Makefile | 6 +
> > > > > drivers/gpu/drm/imx/dcss/dcss-blkctl.c | 70 ++
> > > > > drivers/gpu/drm/imx/dcss/dcss-crtc.c | 219 +++++
> > > > > drivers/gpu/drm/imx/dcss/dcss-ctxld.c | 424 +++++++++
> > > > > drivers/gpu/drm/imx/dcss/dcss-dev.c | 325 +++++++
> > > > > drivers/gpu/drm/imx/dcss/dcss-dev.h | 177 ++++
> > > > > drivers/gpu/drm/imx/dcss/dcss-dpr.c | 562 ++++++++++++
> > > > > drivers/gpu/drm/imx/dcss/dcss-drv.c | 138 +++
> > > > > drivers/gpu/drm/imx/dcss/dcss-dtg.c | 409 +++++++++
> > > > > drivers/gpu/drm/imx/dcss/dcss-kms.c | 198 +++++
> > > > > drivers/gpu/drm/imx/dcss/dcss-kms.h | 44 +
> > > > > drivers/gpu/drm/imx/dcss/dcss-plane.c | 405 +++++++++
> > > > > drivers/gpu/drm/imx/dcss/dcss-scaler.c | 826 ++++++++++++++++++
> > > > > drivers/gpu/drm/imx/dcss/dcss-ss.c | 180 ++++
> > > > > 20 files changed, 4112 insertions(+), 1 deletion(-)
> > > > > create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Kconfig
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/Makefile
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-blkctl.c
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-crtc.c
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ctxld.c
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.c
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dev.h
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dpr.c
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-drv.c
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-dtg.c
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.c
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-kms.h
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-plane.c
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-scaler.c
> > > > > create mode 100644 drivers/gpu/drm/imx/dcss/dcss-ss.c
> > > > >
> > > > > --
> > > > > 2.23.0
> > > > >
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list