[PATCH v2 07/18] drm/dp: Pimp drm_dp_downstream_max_bpc()
Lyude Paul
lyude at redhat.com
Thu Sep 10 19:40:22 UTC 2020
On Thu, 2020-09-10 at 17:46 +0300, Ville Syrjälä wrote:
> On Tue, Sep 08, 2020 at 01:51:56PM -0400, Lyude Paul wrote:
> > On Fri, 2020-09-04 at 14:53 +0300, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > >
> > > Deal with more cases in drm_dp_downstream_max_bpc():
> > > - DPCD 1.0 -> assume 8bpc for non-DP
> > > - DPCD 1.1+ DP (or DP++ with DP sink) -> allow anything
> > > - DPCD 1.1+ TMDS -> check the caps, assume 8bpc if the value is crap
> > > - anything else -> assume 8bpc
> > >
> > > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > ---
> > > drivers/gpu/drm/drm_dp_helper.c | 69 +++++++++++--------
> > > .../drm/i915/display/intel_display_debugfs.c | 3 +-
> > > drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> > > include/drm/drm_dp_helper.h | 10 ++-
> > > 4 files changed, 51 insertions(+), 33 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/drm_dp_helper.c
> > > b/drivers/gpu/drm/drm_dp_helper.c
> > > index 0fcb94f7dbe5..ab87209c25d8 100644
> > > --- a/drivers/gpu/drm/drm_dp_helper.c
> > > +++ b/drivers/gpu/drm/drm_dp_helper.c
> > > @@ -653,36 +653,44 @@ int drm_dp_downstream_max_clock(const u8
> > > dpcd[DP_RECEIVER_CAP_SIZE],
> > > EXPORT_SYMBOL(drm_dp_downstream_max_clock);
> > >
> > > /**
> > > - * drm_dp_downstream_max_bpc() - extract branch device max
> > > - * bits per component
> > > - * @dpcd: DisplayPort configuration data
> > > - * @port_cap: port capabilities
> > > - *
> > > - * See also:
> > > - * drm_dp_read_downstream_info()
> > > - * drm_dp_downstream_max_clock()
> > > - *
> > > - * Returns: Max bpc on success or 0 if max bpc not defined
> > > - */
> > > + * drm_dp_downstream_max_bpc() - extract downstream facing port max
> > > + * bits per component
> > > + * @dpcd: DisplayPort configuration data
> > > + * @port_cap: downstream facing port capabilities
> > > + * @edid: EDID
> > > + *
> > > + * Returns max bpc on success or 0 if max bpc not defined
> > > + */
> > > int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> > > - const u8 port_cap[4])
> > > + const u8 port_cap[4],
> > > + const struct edid *edid)
> > > {
> > > - int type = port_cap[0] & DP_DS_PORT_TYPE_MASK;
> > > - bool detailed_cap_info = dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> > > - DP_DETAILED_CAP_INFO_AVAILABLE;
> > > - int bpc;
> > > -
> > > - if (!detailed_cap_info)
> >
> > I don't think we can drop this check. There's a somewhat surprising blurb
> > about downstream port caps in the DP 2.0 spec (section 5.3.3.1):
> >
> > In addition, the adapter shall set the Detailed Capabilities Info
> > registers
> > (DPCD Addresses 00080h through 0008Fh) to show all the downstream types,
> > including DFP 0. Either one or four bytes are used, per DFP type
> > indication. Therefore, up to 16 (with 1-byte descriptor) or four (with 4-
> > byte descriptor) DFP capabilities can be stored.
> >
> > I've never once actually seen a sink do this, but this does mean it's
> > technically possible tthat if we don't check the detailed caps bit then we
> > might end up reading another port's DFP type instead of max_bpc info. Note
> > though that we can make the assumption the four byte version of the field is
> > used for DP 1.4+
>
> The check is now ...
>
>
> > > + if (!drm_dp_is_branch(dpcd))
> > > return 0;
> > >
> > > - switch (type) {
> > > - case DP_DS_PORT_TYPE_VGA:
> > > - case DP_DS_PORT_TYPE_DVI:
> > > - case DP_DS_PORT_TYPE_HDMI:
> > > + if (dpcd[DP_DPCD_REV] < 0x11) {
> > > + switch (dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> > > DP_DWN_STRM_PORT_TYPE_MASK) {
> > > + case DP_DWN_STRM_PORT_TYPE_DP:
> > > + return 0;
> > > + default:
> > > + return 8;
> > > + }
> > > + }
> > > +
> > > + switch (port_cap[0] & DP_DS_PORT_TYPE_MASK) {
> > > + case DP_DS_PORT_TYPE_DP:
> > > + return 0;
> > > case DP_DS_PORT_TYPE_DP_DUALMODE:
> > > - bpc = port_cap[2] & DP_DS_MAX_BPC_MASK;
> > > + if (is_edid_digital_input_dp(edid))
> > > + return 0;
> > > + fallthrough;
> > > + case DP_DS_PORT_TYPE_HDMI:
> > > + case DP_DS_PORT_TYPE_DVI:
> > > + case DP_DS_PORT_TYPE_VGA:
> > > + if ((dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> > > DP_DETAILED_CAP_INFO_AVAILABLE) == 0)
> > > + return 8;
>
> ... here
Ah-missed that! R-b'd by me then :)
>
>
> > >
> > > - switch (bpc) {
> > > + switch (port_cap[2] & DP_DS_MAX_BPC_MASK) {
> > > case DP_DS_8BPC:
> > > return 8;
> > > case DP_DS_10BPC:
> > > @@ -691,10 +699,12 @@ int drm_dp_downstream_max_bpc(const u8
> > > dpcd[DP_RECEIVER_CAP_SIZE],
> > > return 12;
> > > case DP_DS_16BPC:
> > > return 16;
> > > + default:
> > > + return 8;
> > > }
> > > - fallthrough;
> > > + break;
> > > default:
> > > - return 0;
> > > + return 8;
> > > }
> > > }
> > > EXPORT_SYMBOL(drm_dp_downstream_max_bpc);
> > > @@ -717,12 +727,15 @@ EXPORT_SYMBOL(drm_dp_downstream_id);
> > > * @m: pointer for debugfs file
> > > * @dpcd: DisplayPort configuration data
> > > * @port_cap: port capabilities
> > > + * @edid: EDID
> > > * @aux: DisplayPort AUX channel
> > > *
> > > */
> > > void drm_dp_downstream_debug(struct seq_file *m,
> > > const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> > > - const u8 port_cap[4], struct drm_dp_aux *aux)
> > > + const u8 port_cap[4],
> > > + const struct edid *edid,
> > > + struct drm_dp_aux *aux)
> > > {
> > > bool detailed_cap_info = dpcd[DP_DOWNSTREAMPORT_PRESENT] &
> > > DP_DETAILED_CAP_INFO_AVAILABLE;
> > > @@ -789,7 +802,7 @@ void drm_dp_downstream_debug(struct seq_file *m,
> > > seq_printf(m, "\t\tMax TMDS clock: %d kHz\n",
> > > clk);
> > > }
> > >
> > > - bpc = drm_dp_downstream_max_bpc(dpcd, port_cap);
> > > + bpc = drm_dp_downstream_max_bpc(dpcd, port_cap, edid);
> > >
> > > if (bpc > 0)
> > > seq_printf(m, "\t\tMax bpc: %d\n", bpc);
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > index 53a0a3d9a22d..0bf31f9a8af5 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > > @@ -626,6 +626,7 @@ static void intel_dp_info(struct seq_file *m,
> > > {
> > > struct intel_encoder *intel_encoder =
> > > intel_attached_encoder(intel_connector);
> > > struct intel_dp *intel_dp = enc_to_intel_dp(intel_encoder);
> > > + const struct drm_property_blob *edid = intel_connector-
> > > > base.edid_blob_ptr;
> > >
> > > seq_printf(m, "\tDPCD rev: %x\n", intel_dp->dpcd[DP_DPCD_REV]);
> > > seq_printf(m, "\taudio support: %s\n", yesno(intel_dp->has_audio));
> > > @@ -633,7 +634,7 @@ static void intel_dp_info(struct seq_file *m,
> > > intel_panel_info(m, &intel_connector->panel);
> > >
> > > drm_dp_downstream_debug(m, intel_dp->dpcd, intel_dp->downstream_ports,
> > > - &intel_dp->aux);
> > > + edid ? edid->data : NULL, &intel_dp->aux);
> > > }
> > >
> > > static void intel_dp_mst_info(struct seq_file *m,
> > > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > > b/drivers/gpu/drm/i915/display/intel_dp.c
> > > index 2c8e82d97a34..c73b3efd84e0 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > > @@ -6071,7 +6071,7 @@ intel_dp_set_edid(struct intel_dp *intel_dp)
> > >
> > > intel_dp->dfp.max_bpc =
> > > drm_dp_downstream_max_bpc(intel_dp->dpcd,
> > > - intel_dp->downstream_ports);
> > > + intel_dp->downstream_ports, edid);
> > >
> > > drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] DFP max bpc %d\n",
> > > connector->base.base.id, connector->base.name,
> > > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> > > index 4f946826dfce..6218de1294c1 100644
> > > --- a/include/drm/drm_dp_helper.h
> > > +++ b/include/drm/drm_dp_helper.h
> > > @@ -1646,10 +1646,14 @@ bool drm_dp_downstream_is_tmds(const u8
> > > dpcd[DP_RECEIVER_CAP_SIZE],
> > > int drm_dp_downstream_max_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> > > const u8 port_cap[4]);
> > > int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> > > - const u8 port_cap[4]);
> > > + const u8 port_cap[4],
> > > + const struct edid *edid);
> > > int drm_dp_downstream_id(struct drm_dp_aux *aux, char id[6]);
> > > -void drm_dp_downstream_debug(struct seq_file *m, const u8
> > > dpcd[DP_RECEIVER_CAP_SIZE],
> > > - const u8 port_cap[4], struct drm_dp_aux *aux);
> > > +void drm_dp_downstream_debug(struct seq_file *m,
> > > + const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> > > + const u8 port_cap[4],
> > > + const struct edid *edid,
> > > + struct drm_dp_aux *aux);
> > > enum drm_mode_subconnector
> > > drm_dp_subconnector_type(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> > > const u8 port_cap[4]);
> > --
> > Cheers,
> > Lyude Paul (she/her)
> > Software Engineer at Red Hat
--
Sincerely,
Lyude Paul (she/her)
Software Engineer at Red Hat
More information about the dri-devel
mailing list