[PATCH] drm/xlnx: Use devm_drm_dev_alloc
Daniel Vetter
daniel at ffwll.ch
Fri Sep 11 08:47:12 UTC 2020
On Tue, Sep 08, 2020 at 12:16:00PM -0700, Hyun Kwon wrote:
> Hi Daniel,
>
> On Mon, Sep 07, 2020 at 01:22:25AM -0700, Daniel Vetter wrote:
> > Gets rid of drmm_add_final_kfree, which I want to unexport so that it
> > stops confusion people about this transitional state of rolling drm
> > managed memory out.
> >
> > This also fixes the missing drm_dev_put in the error path of the probe
> > code.
> >
> > v2: Drop the misplaced drm_dev_put from zynqmp_dpsub_drm_init (all
> > other paths leaked on error, this should have been in
> > zynqmp_dpsub_probe), now that subsumed by the auto-cleanup of
> > devm_drm_dev_alloc.
> >
> > Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
> > Cc: Hyun Kwon <hyun.kwon at xilinx.com>
> > Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > Cc: Michal Simek <michal.simek at xilinx.com>
> > Cc: linux-arm-kernel at lists.infradead.org
>
> Looks correct to me.
>
> Reviewed-by: Hyun Kwon <hyun.kwon at xilinx.com>
Merged all patches up to this one here to drm-misc-next.
-Daniel
>
> Thanks!
>
> -hyun
>
> > ---
> > drivers/gpu/drm/xlnx/zynqmp_dpsub.c | 27 ++++++---------------------
> > 1 file changed, 6 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
> > index 26328c76305b..8e69303aad3f 100644
> > --- a/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
> > +++ b/drivers/gpu/drm/xlnx/zynqmp_dpsub.c
> > @@ -111,7 +111,7 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
> > /* Initialize mode config, vblank and the KMS poll helper. */
> > ret = drmm_mode_config_init(drm);
> > if (ret < 0)
> > - goto err_dev_put;
> > + return ret;
> >
> > drm->mode_config.funcs = &zynqmp_dpsub_mode_config_funcs;
> > drm->mode_config.min_width = 0;
> > @@ -121,7 +121,7 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
> >
> > ret = drm_vblank_init(drm, 1);
> > if (ret)
> > - goto err_dev_put;
> > + return ret;
> >
> > drm->irq_enabled = 1;
> >
> > @@ -154,8 +154,6 @@ static int zynqmp_dpsub_drm_init(struct zynqmp_dpsub *dpsub)
> >
> > err_poll_fini:
> > drm_kms_helper_poll_fini(drm);
> > -err_dev_put:
> > - drm_dev_put(drm);
> > return ret;
> > }
> >
> > @@ -208,27 +206,16 @@ static int zynqmp_dpsub_probe(struct platform_device *pdev)
> > int ret;
> >
> > /* Allocate private data. */
> > - dpsub = kzalloc(sizeof(*dpsub), GFP_KERNEL);
> > - if (!dpsub)
> > - return -ENOMEM;
> > + dpsub = devm_drm_dev_alloc(&pdev->dev, &zynqmp_dpsub_drm_driver,
> > + struct zynqmp_dpsub, drm);
> > + if (IS_ERR(dpsub))
> > + return PTR_ERR(dpsub);
> >
> > dpsub->dev = &pdev->dev;
> > platform_set_drvdata(pdev, dpsub);
> >
> > dma_set_mask(dpsub->dev, DMA_BIT_MASK(ZYNQMP_DISP_MAX_DMA_BIT));
> >
> > - /*
> > - * Initialize the DRM device early, as the DRM core mandates usage of
> > - * the managed memory helpers tied to the DRM device.
> > - */
> > - ret = drm_dev_init(&dpsub->drm, &zynqmp_dpsub_drm_driver, &pdev->dev);
> > - if (ret < 0) {
> > - kfree(dpsub);
> > - return ret;
> > - }
> > -
> > - drmm_add_final_kfree(&dpsub->drm, dpsub);
> > -
> > /* Try the reserved memory. Proceed if there's none. */
> > of_reserved_mem_device_init(&pdev->dev);
> >
> > @@ -286,8 +273,6 @@ static int zynqmp_dpsub_remove(struct platform_device *pdev)
> > clk_disable_unprepare(dpsub->apb_clk);
> > of_reserved_mem_device_release(&pdev->dev);
> >
> > - drm_dev_put(drm);
> > -
> > return 0;
> > }
> >
> > --
> > 2.28.0
> >
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list