[PATCH v5 00/80] drm/vc4: Support BCM2711 Display Pipeline

[Hoegeun Kwon]

Hi Maxime,

On 9/8/20 9:00 PM, Maxime Ripard wrote:
> Hi Hoegeun,
>
> On Mon, Sep 07, 2020 at 08:49:12PM +0900, Hoegeun Kwon wrote:
>> On 9/3/20 5:00 PM, Maxime Ripard wrote:
>>> Hi everyone,
>>>
>>> Here's a (pretty long) series to introduce support in the VC4 DRM driver
>>> for the display pipeline found in the BCM2711 (and thus the RaspberryPi 4).
>>>
>>> The main differences are that there's two HDMI controllers and that there's
>>> more pixelvalve now. Those pixelvalve come with a mux in the HVS that still
>>> have only 3 FIFOs. Both of those differences are breaking a bunch of
>>> expectations in the driver, so we first need a good bunch of cleanup and
>>> reworks to introduce support for the new controllers.
>>>
>>> Similarly, the HDMI controller has all its registers shuffled and split in
>>> multiple controllers now, so we need a bunch of changes to support this as
>>> well.
>>>
>>> Only the HDMI support is enabled for now (even though the DPI and DSI
>>> outputs have been tested too).
>>>
>>> Let me know if you have any comments
>>> Maxime
>>>
>>> Cc: bcm-kernel-feedback-list at broadcom.com
>>> Cc: devicetree at vger.kernel.org
>>> Cc: Kamal Dasu <kdasu.kdev at gmail.com>
>>> Cc: Philipp Zabel <p.zabel at pengutronix.de>
>>> Cc: Rob Herring <robh+dt at kernel.org>
>>> Cc: Stephen Boyd <sboyd at kernel.org>
>>>
>>> Changes from v4:
>>>     - Rebased on top of next-20200828
>>>     - Collected the various tags
>>>     - Fixed some issues with 4k support and dual output (thanks Hoegeun!)
>> Thanks for your v5 patchset.
>>
>> I tested all patches based on the next-20200812.
> Thanks again for testing all the patches
>
>> Everything else is fine, but the dual hdmi modetest doesn't work well in my
>> environment...
>>
>> In my environment, dsi is not connected, I have seen your answer[1].
> Can you share a bit more your setup? What monitors are being connected
> to each HDMI port? Do you hotplug any?
Yes, Monitors are being connected to each HDMI ports. (did not use hotplug)

When booting, both HDMI-0 and 1 are recognized and the kernel log is output.
But after run modetest on HDMI-0(works) and modetest on HDMI-1(works),
crtc timed out occurs on HDMI-0 and does not work.

When HDMI-0 is not working we do a modetest on HDMI-0, it will work agin
after about 40 sec.

Below is the log for modetest.


root:~> modetest -Mvc4 -s 32:1280x720         - HDMI-0 works
setting mode 1280x720-60Hz at XR24 on connectors 32, crtc 64
failed to set gamma: Invalid argument

root:~> modetest -Mvc4 -s 32:1280x720         - HDMI-0 works
setting mode 1280x720-60Hz at XR24 on connectors 32, crtc 64
failed to set gamma: Invalid argument

root:~> modetest -Mvc4 -s 38:1280x720         - HDMI-1 works
setting mode 1280x720-60Hz at XR24 on connectors 38, crtc 69
failed to set gamma: Invalid argument

                                   - Crtc timed out occurs on HDMI-0 and 
does not work.

[   71.134283] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* 
[CRTC:64:crtc-3] flip_done timed out
[   81.374296] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* 
[CRTC:64:crtc-3] flip_done timed out
[   91.618380] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* 
[CONNECTOR:32:HDMI-A-1] flip_done timed out
[  101.854274] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* 
[PLANE:60:plane-3] flip_done timed out

[  112.094271] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* 
[CRTC:64:crtc-3] flip_done timed out
[  122.590311] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* 
[CRTC:64:crtc-3] flip_done timed out

root:~> modetest -Mvc4 -s 32:1280x720
[  132.830309] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* 
[CONNECTOR:32:HDMI-A-1] flip_done timed out
[  143.070307] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* 
[PLANE:60:plane-3] flip_done timed out
[  153.310303] [drm:drm_atomic_helper_wait_for_flip_done] *ERROR* 
[CRTC:64:crtc-3] flip_done timed out
setting mode 1280x720-60Hz at XR24 on connectors 32, crtc 64
[  163.550340] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* 
[CRTC:64:crtc-3] flip_done timed out
[  173.790277] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* 
[CONNECTOR:32:HDMI-A-1] flip_done timed out
[  184.030286] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* 
[PLANE:60:plane-3] flip_done timed out
failed to set gamma: Invalid argument         - HDMI-0 works


Best regards,
Hoegeun