[RFC PATCH v1 3/3] dt-binding: display: Require two rests on mantix panel

[Guido Günther]

We need to reset both for the panel to show an image.

Signed-off-by: Guido Günther <agx at sigxcpu.org>
---
 .../bindings/display/panel/mantix,mlaf057we51-x.yaml       | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
index 937323cc9aaa..ba5a18fac9f9 100644
--- a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
@@ -35,7 +35,9 @@ properties:
   vddi-supply:
     description: 1.8V I/O voltage supply
 
-  reset-gpios: true
+  reset-gpios:
+    minItems: 2
+    maxItems: 2
 
   backlight: true
 
@@ -62,7 +64,8 @@ examples:
             avdd-supply = <&reg_avdd>;
             avee-supply = <&reg_avee>;
             vddi-supply = <&reg_1v8_p>;
-            reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>,
+                          <&gpio1 24 GPIO_ACTIVE_LOW>;
             backlight = <&backlight>;
         };
     };
-- 
2.26.2