[PATCH RFC v7 3/6] dt-bindings: display: add Unisoc's dpu bindings

[Kevin Tang]

From: Kevin Tang <kevin.tang at unisoc.com>

DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
which transfers the image data from a video memory buffer to an internal
LCD interface.

RFC v7:
  - Fix DTC unit name warnings
  - Fix the problem of maintainers

Cc: Orson Zhai <orsonzhai at gmail.com>
Cc: Chunyan Zhang <zhang.lyra at gmail.com>
Signed-off-by: Kevin Tang <kevin.tang at unisoc.com>
---
 .../bindings/display/sprd/sprd,sharkl3-dpu.yaml    | 83 ++++++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml

diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
new file mode 100644
index 0000000..a9052e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc Sharkl3 Display Processor Unit (DPU)
+
+maintainers:
+  - Kevin Tang <kevin.tang at unisoc.com>
+
+description: |
+  DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
+  which transfers the image data from a video memory buffer to an internal
+  LCD interface.
+
+properties:
+  compatible:
+    const: sprd,sharkl3-dpu
+
+  reg:
+    maxItems: 1
+    description:
+      Physical base address and length of the DPU registers set
+
+  interrupts:
+    maxItems: 1
+    description:
+      The interrupt signal from DPU
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: clk_src_128m
+      - const: clk_src_384m
+
+  power-domains:
+    maxItems: 1
+    description: A phandle to DPU power domain node.
+
+  iommus:
+    maxItems: 1
+    description: A phandle to DPU iommu node.
+
+  port:
+    type: object
+    description:
+      A port node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+      That port should be the output endpoint, usually output to
+      the associated DSI.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    dpu: dpu at 63000000 {
+        compatible = "sprd,sharkl3-dpu";
+        reg = <0x63000000 0x1000>;
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "clk_src_128m", "clk_src_384m";
+
+        clocks = <&pll CLK_TWPLL_128M>,
+          <&pll CLK_TWPLL_384M>;
+
+        dpu_port: port {
+            dpu_out: endpoint {
+                remote-endpoint = <&dsi_in>;
+            };
+        };
+    };
-- 
2.7.4