[PATCH] drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid()

[Lyude Paul]

On Tue, 2020-09-29 at 21:09 +0300, Ville Syrjälä wrote:
> On Tue, Sep 29, 2020 at 01:54:13PM -0400, Lyude Paul wrote:
> > On Mon, 2020-09-28 at 16:01 +0300, Ville Syrjälä wrote:
> > > On Tue, Sep 22, 2020 at 05:05:10PM -0400, Lyude Paul wrote:
> > > > While I thought I had this correct (since it actually did reject modes
> > > > like I expected during testing), Ville Syrjala from Intel pointed out
> > > > that the logic here isn't correct. max_clock refers to the max symbol
> > > > rate supported by the encoder, so limiting clock to ds_clock using
> > > > max()
> > > > doesn't make sense. Additionally, we want to check against 6bpc for
> > > > the
> > > > time being since that's the minimum possible bpc here, not the
> > > > reported
> > > > bpc from the connector. See:
> > > > 
> > > > https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html
> > > > 
> > > > For more info.
> > > > 
> > > > So, let's rewrite this using Ville's advice.
> > > > 
> > > > Signed-off-by: Lyude Paul <lyude at redhat.com>
> > > > Fixes: 409d38139b42 ("drm/nouveau/kms/nv50-: Use downstream DP clock
> > > > limits for mode validation")
> > > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > > Cc: Lyude Paul <lyude at redhat.com>
> > > > Cc: Ben Skeggs <bskeggs at redhat.com>
> > > > ---
> > > >  drivers/gpu/drm/nouveau/nouveau_dp.c | 23 +++++++++++++----------
> > > >  1 file changed, 13 insertions(+), 10 deletions(-)
> > > > 
> > > > diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c
> > > > b/drivers/gpu/drm/nouveau/nouveau_dp.c
> > > > index 7b640e05bd4cd..24c81e423d349 100644
> > > > --- a/drivers/gpu/drm/nouveau/nouveau_dp.c
> > > > +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c
> > > > @@ -231,23 +231,26 @@ nv50_dp_mode_valid(struct drm_connector
> > > > *connector,
> > > >  		   const struct drm_display_mode *mode,
> > > >  		   unsigned *out_clock)
> > > >  {
> > > > -	const unsigned min_clock = 25000;
> > > > -	unsigned max_clock, ds_clock, clock;
> > > > +	const unsigned int min_clock = 25000;
> > > > +	unsigned int max_clock, ds_clock, clock;
> > > > +	const u8 bpp = 18; /* 6 bpc */
> > > 
> > > AFAICS nv50_outp_atomic_check() and nv50_msto_atomic_check()
> > > just blindly use connector->display_info.bpc without any fallback
> > > logic to lower the bpc. So Ilia's concerns seem well founded.
> > > Without that logic I guess you should just use
> > > connector->display_info.bpc here as well.
> > > 
> > > >  	enum drm_mode_status ret;
> > > >  
> > > >  	if (mode->flags & DRM_MODE_FLAG_INTERLACE && !outp-
> > > > >caps.dp_interlace)
> > > >  		return MODE_NO_INTERLACE;
> > > >  
> > > >  	max_clock = outp->dp.link_nr * outp->dp.link_bw;
> > > > -	ds_clock = drm_dp_downstream_max_dotclock(outp->dp.dpcd,
> > > > -						  outp-
> > > > >dp.downstream_ports);
> > > > -	if (ds_clock)
> > > > -		max_clock = min(max_clock, ds_clock);
> > > > -
> > > > -	clock = mode->clock * (connector->display_info.bpc * 3) / 10;
> > > > -	ret = nouveau_conn_mode_clock_valid(mode, min_clock,
> > > > max_clock,
> > > > -					    &clock);
> > > > +	clock = mode->clock * bpp / 8;
> > > > +	if (clock > max_clock)
> > > > +		return MODE_CLOCK_HIGH;
> > > 
> > > This stuff vs. nouveau_conn_mode_clock_valid() still seems a bit messy.
> > > The max_clock you pass to nouveau_conn_mode_clock_valid() is the max
> > > symbol clock, but nouveau_conn_mode_clock_valid() checks it against the
> > > dotclock. Also only nouveau_conn_mode_clock_valid() has any kind of
> > > stereo 3D handling, but AFAICS stereo_allowed is also set for DP?
> > 
> > ...not sure I'm following you here, it's set to true for DP so don't we
> > want
> > to check it and adjust the pixel clock we output accordingly?
> 
> Yes, but then you need to also double your your pixel clock
> derived values in this function. Ie. all the mode->clock
> needs to become mode->clock*2 when dealing with a 3D frame
> packing mode.

oh this is a good point, thanks for noticing. I guess I'll get to changing
this around once I start working on the rest of the bpp stuff, since I'd
rather get this fixed first (I doubt many folks are using nouveau for 3D right
now, but if other nouveau folks disagree i'm happy to change my mind)
> 
> > > > +
> > > > +	ds_clock = drm_dp_downstream_max_dotclock(outp->dp.dpcd, outp-
> > > > > dp.downstream_ports);
> > > > +	if (ds_clock && mode->clock > ds_clock)
> > > > +		return MODE_CLOCK_HIGH;
> > > > +
> > > > +	ret = nouveau_conn_mode_clock_valid(mode, min_clock,
> > > > max_clock,
> > > > &clock);
> > > >  	if (out_clock)
> > > >  		*out_clock = clock;
> > > > +
> > > >  	return ret;
> > > >  }
> > > > -- 
> > > > 2.26.2
> > -- 
> > Cheers,
> > 	Lyude Paul (she/her)
> > 	Software Engineer at Red Hat
-- 
Cheers,
	Lyude Paul (she/her)
	Software Engineer at Red Hat