[RESEND PATCH v4 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies

Robert Foss robert.foss at linaro.org
Thu Apr 1 08:41:27 UTC 2021


Hey Hsin-Yi,

Thanks for the reminder, just merged the series.

https://cgit.freedesktop.org/drm/drm-misc/commit/?id=2f240cdb23e9cde551d99c77f4e60062188d8d81

On Thu, 1 Apr 2021 at 07:32, Hsin-Yi Wang <hsinyi at chromium.org> wrote:
>
> anx7625 requires 3 power supply regulators.
>
> Signed-off-by: Hsin-Yi Wang <hsinyi at chromium.org>
> Reviewed-by: Rob Herring <robh at kernel.org>
> Reviewed-by: Robert Foss <robert.foss at linaro.org>
> ---
> v3->v4: rebase to drm-misc/for-linux-next
> ---
>  .../bindings/display/bridge/analogix,anx7625.yaml | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> index c789784efe306..ab48ab2f4240d 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -34,6 +34,15 @@ properties:
>      description: used for reset chip control, RESET_N pin B7.
>      maxItems: 1
>
> +  vdd10-supply:
> +    description: Regulator that provides the supply 1.0V power.
> +
> +  vdd18-supply:
> +    description: Regulator that provides the supply 1.8V power.
> +
> +  vdd33-supply:
> +    description: Regulator that provides the supply 3.3V power.
> +
>    ports:
>      $ref: /schemas/graph.yaml#/properties/ports
>
> @@ -55,6 +64,9 @@ properties:
>  required:
>    - compatible
>    - reg
> +  - vdd10-supply
> +  - vdd18-supply
> +  - vdd33-supply
>    - ports
>
>  additionalProperties: false
> @@ -72,6 +84,9 @@ examples:
>              reg = <0x58>;
>              enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
>              reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
> +            vdd10-supply = <&pp1000_mipibrdg>;
> +            vdd18-supply = <&pp1800_mipibrdg>;
> +            vdd33-supply = <&pp3300_mipibrdg>;
>
>              ports {
>                  #address-cells = <1>;
> --
> 2.31.0.291.g576ba9dcdaf-goog
>


More information about the dri-devel mailing list