[PATCH v3 1/3] dt-bindings: display: bridge: add it66121 bindings

[Laurent Pinchart]

Hi Neil,

Thank you for the patch.

On Mon, Apr 12, 2021 at 05:46:46PM +0200, Neil Armstrong wrote:
> From: Phong LE <ple at baylibre.com>
> 
> Add the ITE bridge HDMI it66121 bindings.
> 
> Signed-off-by: Phong LE <ple at baylibre.com>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
>  .../bindings/display/bridge/ite,it66121.yaml  | 123 ++++++++++++++++++
>  1 file changed, 123 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
> new file mode 100644
> index 000000000000..61ed6dc7740b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ITE it66121 HDMI bridge Device Tree Bindings
> +
> +maintainers:
> +  - Phong LE <ple at baylibre.com>
> +  - Neil Armstrong <narmstrong at baylibre.com>
> +
> +description: |
> +  The IT66121 is a high-performance and low-power single channel HDMI
> +  transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible
> +  to DVI 1.0 specifications.
> +
> +properties:
> +  compatible:
> +    const: ite,it66121
> +
> +  reg:
> +    maxItems: 1
> +    description: base I2C address of the device

You can drop the description.

> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: GPIO connected to active low reset
> +
> +  vrf12-supply:
> +    description: Regulator for 1.2V analog core power.
> +
> +  vcn33-supply:
> +    description: Regulator for 3.3V digital core power.
> +
> +  vcn18-supply:
> +    description: Regulator for 1.8V IO core power.
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port at 0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description: DPI input port.
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +            unevaluatedProperties: false
> +
> +            properties:
> +              bus-width:
> +                description:
> +                  Endpoint bus width.
> +                enum:
> +                  - 12  # 12 data lines connected and dual-edge mode
> +                  - 24  # 24 data lines connected and single-edge mode
> +                default: 24
> +
> +      port at 1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: HDMI Connector port.
> +
> +    required:
> +      - port at 0
> +      - port at 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +  - vrf12-supply
> +  - vcn33-supply
> +  - vcn18-supply
> +  - interrupts
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;

It's customary to indent DT examples with 4 spaces.

> +
> +      it66121hdmitx: it66121hdmitx at 4c {
> +        compatible = "ite,it66121";
> +        pinctrl-names = "default";
> +        pinctrl-0 = <&ite_pins_default>;
> +        vcn33-supply = <&mt6358_vcn33_wifi_reg>;
> +        vcn18-supply = <&mt6358_vcn18_reg>;
> +        vrf12-supply = <&mt6358_vrf12_reg>;
> +        reset-gpios = <&pio 160 1 /* GPIO_ACTIVE_LOW */>;

You can #include the necessary headers at the top of the example, and
use GPIO_ACTIVE_LOW and IRQ_TYPE_LEVEL_LOW to replace the numerical
values.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> +        interrupt-parent = <&pio>;
> +        interrupts = <4 8 /* IRQ_TYPE_LEVEL_LOW */>;
> +        reg = <0x4c>;
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port at 0 {
> +            reg = <0>;
> +            it66121_in: endpoint {
> +              bus-width = <12>;
> +              remote-endpoint = <&display_out>;
> +            };
> +          };
> +
> +          port at 1 {
> +            reg = <1>;
> +            hdmi_conn_out: endpoint {
> +              remote-endpoint = <&hdmi_conn_in>;
> +            };
> +          };
> +        };
> +      };
> +    };

-- 
Regards,

Laurent Pinchart