[PATCH v2 3/3] drm/msm/dp: check main link status before start aux read

[Stephen Boyd]

Quoting khsieh at codeaurora.org (2021-04-15 10:37:29)
> On 2021-04-14 14:09, Stephen Boyd wrote:
> > Quoting Kuogee Hsieh (2021-04-13 16:11:44)
> >> Make sure main link is in connection state before start aux
> >> read/write operation to avoid unnecessary long delay due to
> >> main link had been unplugged.
> >> 
> >> Signed-off-by: Kuogee Hsieh <khsieh at codeaurora.org>
> >> ---
> >>  drivers/gpu/drm/msm/dp/dp_aux.c  |  5 +++++
> >>  drivers/gpu/drm/msm/dp/dp_link.c | 20 +++++++++++++++-----
> >>  2 files changed, 20 insertions(+), 5 deletions(-)
> >> 
> >> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c 
> >> b/drivers/gpu/drm/msm/dp/dp_aux.c
> >> index 7c22bfe..fae3806 100644
> >> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> >> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> >> @@ -343,6 +343,11 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux 
> >> *dp_aux,
> >> 
> >>         mutex_lock(&aux->mutex);
> >> 
> >> +       if (!dp_catalog_link_is_connected(aux->catalog)) {
> >> +               ret = -ETIMEDOUT;
> >> +               goto unlock_exit;
> >> +       }
> > 
> > I get a crash here sometimes when plugging and unplugging an apple HDMI
> > dongle during suspend/resume. I guess device power management
> > (dp_pm_suspend()) is happening in parallel with aux transfers from the
> > kthread. Why doesn't the aux communication start reporting NAKs once 
> > the
> > cable is disconnected?
> > 
> > [  366.210058] hdmi-audio-codec hdmi-audio-codec.15.auto: calling
> > platform_pm_suspend+0x0/0x60 @ 7175, parent:
> > ae90000.displayport-controller
> > [  366.222825] hdmi-audio-codec hdmi-audio-codec.15.auto:
> > platform_pm_suspend+0x0/0x60 returned 0 after 1 usecs
> > [  366.232939] msm-dp-display ae90000.displayport-controller: calling
> > dp_pm_suspend+0x0/0x80 @ 7175, parent: ae00000.mdss
> > [  366.244006] msm-dp-display ae90000.displayport-controller:
> > dp_pm_suspend+0x0/0x80 returned 0 after 79 usecs
> > [  366.254025] msm_dsi ae94000.dsi: calling
> > pm_runtime_force_suspend+0x0/0xb4 @ 7175, parent: ae00000.mdss
> > [  366.263669] msm_dsi ae94000.dsi: pm_runtime_force_suspend+0x0/0xb4
> > returned 0 after 0 usecs
> > [  366.272290] panel-simple panel: calling
> > platform_pm_suspend+0x0/0x60 @ 7175, parent: platform
> > [  366.272501] ti_sn65dsi86 2-002d: calling
> > pm_runtime_force_suspend+0x0/0xb4 @ 176, parent: i2c-2
> > [  366.281055] panel-simple panel: platform_pm_suspend+0x0/0x60
> > returned 0 after 0 usecs
> > [  366.281081] leds mmc1::: calling led_suspend+0x0/0x4c @ 7175,
> > parent: 7c4000.sdhci
> > [  366.290065] ti_sn65dsi86 2-002d: pm_runtime_force_suspend+0x0/0xb4
> > returned 0 after 0 usecs
> > [  366.298046] leds mmc1::: led_suspend+0x0/0x4c returned 0 after 1 
> > usecs
> > [  366.302994] Internal error: synchronous external abort: 96000010
> > [#1] PREEMPT SMP
> > [  366.303006] Modules linked in: vhost_vsock
> > vmw_vsock_virtio_transport_common vsock vhost rfcomm algif_hash
> > algif_skcipher af_alg xt_cgroup uinput xt_MASQUERADE venus_enc
> > hci_uart venus_dec btqca cros_ec_typec typec bluetooth qcom_spmi_adc5
> > snd_soc_sc7180 qcom_spmi_temp_alarm ecdh_generic qcom_spmi_adc_tm5
> > qcom_vadc_common snd_soc_qcom_common ecc snd_soc_rt5682_i2c
> > snd_soc_rt5682 snd_soc_rl6231 venus_core v4l2_mem2mem
> > snd_soc_lpass_sc7180 snd_soc_lpass_hdmi snd_soc_lpass_cpu
> > snd_soc_lpass_platform snd_soc_max98357a fuse iio_trig_sysfs
> > cros_ec_sensors cros_ec_sensors_ring cros_ec_lid_angle
> > cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf
> > cros_ec_sensorhub lzo_rle lzo_compress zram ath10k_snoc ath10k_core
> > ath mac80211 cfg80211 cdc_ether usbnet r8152 mii uvcvideo
> > videobuf2_vmalloc joydev
> > [  366.303211] CPU: 0 PID: 224 Comm: dp_hpd_handler Not tainted 5.4.109 
> > #27
> > [  366.303216] Hardware name: Google Lazor (rev3+) with KB Backlight 
> > (DT)
> > [  366.303225] pstate: 60c00009 (nZCv daif +PAN +UAO)
> > [  366.303234] pc : dp_catalog_link_is_connected+0x20/0x34
> > [  366.303244] lr : dp_aux_transfer+0x44/0x284
> > [  366.303250] sp : ffffffc011bfbbe0
> > [  366.303254] x29: ffffffc011bfbbe0 x28: aaaaaaaaaaaaaaaa
> > [  366.303262] x27: 000000000000000c x26: ffffff896f8212bc
> > [  366.303269] x25: 0000000000000001 x24: 0000000000000001
> > [  366.303275] x23: 0000000000000020 x22: ffffff896ff82118
> > [  366.303282] x21: ffffffc011bfbc50 x20: ffffff896ff82090
> > [  366.303289] x19: ffffff896ffc3598 x18: 0000000000000000
> > [  366.303295] x17: 0000000000000000 x16: 0000000000000001
> > [  366.303303] x15: 0000000000000000 x14: 00000000000002ef
> > [  366.303311] x13: 0000000000000400 x12: ffffffeb896ea060
> > [  366.303317] x11: 0000000000000000 x10: 0000000000000000
> > [  366.303324] x9 : ffffff896f061100 x8 : ffffffc010582204
> > [  366.303331] x7 : 000000b2b5593519 x6 : 00000000003033ff
> > [  366.303338] x5 : 0000000000000000 x4 : 0000000000000001
> > [  366.303345] x3 : ffffff896ff432a1 x2 : 0000000000000000
> > [  366.303352] x1 : 0000000000000119 x0 : ffffff896ffc3598
> > [  366.303360] Call trace:
> > [  366.303367]  dp_catalog_link_is_connected+0x20/0x34
> > [  366.303374]  dp_aux_transfer+0x44/0x284
> > [  366.303387]  drm_dp_dpcd_access+0x8c/0x11c
> > [  366.303393]  drm_dp_dpcd_read+0x64/0x10c
> > [  366.303399]  dp_link_process_request+0x94/0xaf8
> > [  366.303405]  dp_display_usbpd_attention_cb+0x38/0x140
> > [  366.303411]  hpd_event_thread+0x3f0/0x48c
> > [  366.303426]  kthread+0x140/0x17c
> > [  366.303439]  ret_from_fork+0x10/0x18
> > [  366.303458] Code: d503201f f85f0268 f9400508 91081108 (b9400108)
> > 
> it needs to make sure core clock enabled before access dp ctrl registers
> I am look into it

Is it really necessary to have this patch at all? I think there are
bigger problems with suspend/resume of the DP driver in relation to the
kthread stopping. I hope that the aux channel would start NAKing
transfers once the cable is disconnected too, so that we don't need to
do an extra check for each aux transfer.