[PATCH v4 5/6] dt-bindings: display: add Unisoc's mipi dsi controller bindings

Kevin Tang kevin3.tang at gmail.com
Sun Apr 18 16:33:42 UTC 2021


Maxime Ripard <maxime at cerno.tech> 于2021年4月15日周四 下午4:42写道:
>
> On Fri, Apr 09, 2021 at 08:23:19AM +0800, Kevin Tang wrote:
> > Maxime Ripard <maxime at cerno.tech> 于2021年4月7日周三 下午6:46写道:
> >
> > > On Wed, Mar 31, 2021 at 09:49:14AM +0800, Kevin Tang wrote:
> > > > Hi Maxime,
> > > >
> > > > Maxime Ripard <maxime at cerno.tech> 于2021年3月24日周三 下午7:13写道:
> > > >
> > > > > On Mon, Feb 22, 2021 at 09:28:21PM +0800, Kevin Tang wrote:
> > > > > > From: Kevin Tang <kevin.tang at unisoc.com>
> > > > > >
> > > > > > Adds MIPI DSI Controller
> > > > > > support for Unisoc's display subsystem.
> > > > > >
> > > > > > Cc: Orson Zhai <orsonzhai at gmail.com>
> > > > > > Cc: Chunyan Zhang <zhang.lyra at gmail.com>
> > > > > > Signed-off-by: Kevin Tang <kevin.tang at unisoc.com>
> > > > > > Reviewed-by: Rob Herring <robh at kernel.org>
> > > > > > ---
> > > > > >  .../display/sprd/sprd,sharkl3-dsi-host.yaml   | 102
> > > ++++++++++++++++++
> > > > > >  1 file changed, 102 insertions(+)
> > > > > >  create mode 100644
> > > > >
> > > Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
> > > > > >
> > > > > > diff --git
> > > > >
> > > a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
> > > > >
> > > b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
> > > > > > new file mode 100644
> > > > > > index 000000000..d439f688f
> > > > > > --- /dev/null
> > > > > > +++
> > > > >
> > > b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
> > > > > > @@ -0,0 +1,102 @@
> > > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > > > +%YAML 1.2
> > > > > > +---
> > > > > > +$id:
> > > > > http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dsi-host.yaml#
> > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > > > +
> > > > > > +title: Unisoc MIPI DSI Controller
> > > > > > +
> > > > > > +maintainers:
> > > > > > +  - Kevin Tang <kevin.tang at unisoc.com>
> > > > > > +
> > > > > > +properties:
> > > > > > +  compatible:
> > > > > > +    const: sprd,sharkl3-dsi-host
> > > > > > +
> > > > > > +  reg:
> > > > > > +    maxItems: 1
> > > > > > +
> > > > > > +  interrupts:
> > > > > > +    maxItems: 2
> > > > > > +
> > > > > > +  clocks:
> > > > > > +    minItems: 1
> > > > > > +
> > > > > > +  clock-names:
> > > > > > +    items:
> > > > > > +      - const: clk_src_96m
> > > > > > +
> > > > > > +  power-domains:
> > > > > > +    maxItems: 1
> > > > > > +
> > > > > > +  ports:
> > > > > > +    type: object
> > > > > > +
> > > > > > +    properties:
> > > > > > +      "#address-cells":
> > > > > > +        const: 1
> > > > > > +
> > > > > > +      "#size-cells":
> > > > > > +        const: 0
> > > > > > +
> > > > > > +      port at 0:
> > > > > > +        type: object
> > > > > > +        description:
> > > > > > +          A port node with endpoint definitions as defined in
> > > > > > +
> > > Documentation/devicetree/bindings/media/video-interfaces.txt.
> > > > > > +          That port should be the input endpoint, usually coming
> > > from
> > > > > > +          the associated DPU.
> > > > > > +      port at 1:
> > > > > > +        type: object
> > > > > > +        description:
> > > > > > +          A port node with endpoint definitions as defined in
> > > > > > +
> > > Documentation/devicetree/bindings/media/video-interfaces.txt.
> > > > > > +          That port should be the output endpoint, usually output to
> > > > > > +          the associated panel.
> > > > >
> > > > > The DSI generic binding asks that peripherals that are controlled
> > > > > through a DCS be a subnode of the MIPI-DSI bus, not through a port
> > > > > endpoint.
> > > > >
> > > >  Our DSI controller don't support DCS now...
> > >
> > > I'm not sure I follow you, you mentionned in the patch 4 that you were
> > > testing for a device to be in command mode, how would that work without
> > > DCS support?
> > >
> > Sorry, I see DCS as DSC, pls ignore my previous comments.
> >
> > dsi input node is display controller and dsi output node is panel,
> > I still don't understand what it has to do with dcs? and it seems that
> > other vendors also like this.
> >
> > can you help provide some cases?
>
> So the device tree is a tree organized through which bus controls which
> device: Your DSI controller is accessed through a memory-mapped region
> and is thus a child node of the main bus (I guess?) and then, since the
> DSI panel is going to be controlled through the DSI controller and
> MIPI-DCS, it needs to be a child of the display controller.
Yeah, access DSI controller registers is through AHB bus.

I'm a little confused, DSI panel node should be a child of the display
controller?
I found a lot of cases are organized like this, we also do like it.
https://elixir.bootlin.com/linux/v5.11.15/source/arch/arm/boot/dts/tegra114-dalmore.dts#L48

>
> This is exactly what is being described here:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt#n42
>
> The second port is thus not needed at all
Yeah, dsi_out port is no need, should be detele.
Besides, I also have a question, if out dsi-phy is separate driver(eg,
dphy have it's own bus)
dsi_out port should be "dphy_in"?

>
> Maxime


More information about the dri-devel mailing list