[PATCH v4 0/9] drm: Support simple-framebuffer devices and firmware fbs

[Maxime Ripard]

On Fri, Apr 16, 2021 at 11:00:39AM +0200, Thomas Zimmermann wrote:
> This patchset adds support for simple-framebuffer platform devices and
> a handover mechanism for native drivers to take-over control of the
> hardware.
> 
> The new driver, called simpledrm, binds to a simple-frambuffer platform
> device. The kernel's boot code creates such devices for firmware-provided
> framebuffers, such as EFI-GOP or VESA. Typically the BIOS, UEFI or boot
> loader sets up the framebuffers. Description via device tree is also an
> option.
> 
> Simpledrm is small enough to be linked into the kernel. The driver's main
> purpose is to provide graphical output during the early phases of the boot
> process, before the native DRM drivers are available. Native drivers are
> typically loaded from an initrd ram disk. Occationally simpledrm can also
> serve as interim solution on graphics hardware without native DRM driver.
> 
> So far distributions rely on fbdev drivers, such as efifb, vesafb or
> simplefb, for early-boot graphical output. However fbdev is deprecated and
> the drivers do not provide DRM interfaces for modern userspace.
> 
> Patches 1 and 2 prepare the DRM format helpers for simpledrm.
> 
> Patches 4 to 8 add the simpledrm driver. It's build on simple DRM helpers
> and SHMEM. It supports 16-bit, 24-bit and 32-bit RGB framebuffers. During
> pageflips, SHMEM buffers are copied into the framebuffer memory, similar
> to cirrus or mgag200. The code in patches 7 and 8 handles clocks and
> regulators. It's based on the simplefb drivers, but has been modified for
> DRM.
> 
> Patches 3 and 9 add a hand-over mechanism. Simpledrm acquires it's
> framebuffer's I/O-memory range and can be hot-unplugged by a native driver.
> The native driver will remove simpledrm before taking over the hardware.
> The removal is integrated into existing helpers, so existing drivers use
> it automatically.
> 
> I've also been working on fastboot support (i.e., flicker-free booting).
> This requires state-readout from simpledrm via generic interfaces, as
> outlined in [1]. I do have some prototype code, but it will take a while
> to get this ready. Simpledrm will then support it.
> 
> I've tested simpledrm with x86 EFI and VESA framebuffers, which both work
> reliably. The fbdev console and Weston work automatically. Xorg requires
> manual configuration of the device. Xorgs current modesetting driver does
> not work with both, platform and PCI device, for the same physical
> hardware. Once configured, X11 works. I looked into X11, but couldn't see
> an easy way of fixing the problem. With the push towards Wayland+Xwayland
> I expect the problem to become a non-issue soon. Additional testing has
> been reported at [2].
> 
> One cosmetical issue is that simpledrm's device file is card0 and the
> native driver's device file is card1. After simpledrm has been kicked out,
> only card1 is left. This does not seem to be a practical problem however.

Provided that patches 4 to 8 are squashed when merged:
Acked-by: Maxime Ripard <maxime at cerno.tech>

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20210429/c90f3af0/attachment.sig>