[PATCH 25/36] drm: xlnx: zynqmp_dpsub: Register AUX bus at bridge attach time
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Aug 9 01:34:46 UTC 2021
To prepare for operating as a standalone DP bridge with the DRM device
implemented in the PL, move registration of the AUX bus to bridge attach
time, as that's the earliest point when a DRM device is available.
The DRM device pointer stored in zynqmp_dp isn't used anymore, drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
drivers/gpu/drm/xlnx/zynqmp_dp.c | 41 +++++++++++++++++++-------------
1 file changed, 24 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index 72fe3b7fb78e..e40ddfd27ff0 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -275,7 +275,6 @@ struct zynqmp_dp_config {
* struct zynqmp_dp - Xilinx DisplayPort core
* @dev: device structure
* @dpsub: Display subsystem
- * @drm: DRM core
* @iomem: device I/O memory for register access
* @reset: reset controller
* @irq: irq
@@ -296,7 +295,6 @@ struct zynqmp_dp_config {
struct zynqmp_dp {
struct device *dev;
struct zynqmp_dpsub *dpsub;
- struct drm_device *drm;
void __iomem *iomem;
struct reset_control *reset;
int irq;
@@ -1056,7 +1054,7 @@ static int zynqmp_dp_aux_init(struct zynqmp_dp *dp)
dp->aux.name = "ZynqMP DP AUX";
dp->aux.dev = dp->dev;
- dp->aux.drm_dev = dp->drm;
+ dp->aux.drm_dev = dp->bridge.dev;
dp->aux.transfer = zynqmp_dp_aux_transfer;
return drm_dp_aux_register(&dp->aux);
@@ -1282,14 +1280,35 @@ static int zynqmp_dp_bridge_attach(struct drm_bridge *bridge,
struct zynqmp_dp *dp = bridge_to_dp(bridge);
int ret;
+ /* Initialize and register the AUX adapter. */
+ ret = zynqmp_dp_aux_init(dp);
+ if (ret) {
+ dev_err(dp->dev, "failed to initialize DP aux\n");
+ return ret;
+ }
+
if (dp->next_bridge) {
ret = drm_bridge_attach(bridge->encoder, dp->next_bridge,
bridge, flags);
if (ret < 0)
- return ret;
+ goto error;
}
+ /* Now that initialisation is complete, enable interrupts. */
+ zynqmp_dp_write(dp, ZYNQMP_DP_INT_EN, ZYNQMP_DP_INT_ALL);
+
return 0;
+
+error:
+ zynqmp_dp_aux_cleanup(dp);
+ return ret;
+}
+
+static void zynqmp_dp_bridge_detach(struct drm_bridge *bridge)
+{
+ struct zynqmp_dp *dp = bridge_to_dp(bridge);
+
+ zynqmp_dp_aux_cleanup(dp);
}
static int zynqmp_dp_bridge_mode_valid(struct drm_bridge *bridge,
@@ -1494,6 +1513,7 @@ static struct edid *zynqmp_dp_bridge_get_edid(struct drm_bridge *bridge,
static const struct drm_bridge_funcs zynqmp_dp_bridge_funcs = {
.attach = zynqmp_dp_bridge_attach,
+ .detach = zynqmp_dp_bridge_detach,
.mode_valid = zynqmp_dp_bridge_mode_valid,
.atomic_enable = zynqmp_dp_bridge_atomic_enable,
.atomic_disable = zynqmp_dp_bridge_atomic_disable,
@@ -1593,7 +1613,6 @@ int zynqmp_dp_drm_init(struct zynqmp_dpsub *dpsub)
{
struct zynqmp_dp *dp = dpsub->dp;
struct drm_bridge *bridge = &dp->bridge;
- int ret;
dp->config.misc0 &= ~ZYNQMP_DP_MAIN_STREAM_MISC0_SYNC_LOCK;
zynqmp_dp_set_format(dp, NULL, ZYNQMP_DPSUB_FORMAT_RGB, 8);
@@ -1605,16 +1624,6 @@ int zynqmp_dp_drm_init(struct zynqmp_dpsub *dpsub)
bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
dpsub->bridge = bridge;
- /* Initialize and register the AUX adapter. */
- ret = zynqmp_dp_aux_init(dp);
- if (ret) {
- dev_err(dp->dev, "failed to initialize DP aux\n");
- return ret;
- }
-
- /* Now that initialisation is complete, enable interrupts. */
- zynqmp_dp_write(dp, ZYNQMP_DP_INT_EN, ZYNQMP_DP_INT_ALL);
-
return 0;
}
@@ -1632,7 +1641,6 @@ int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub, struct drm_device *drm)
dp->dev = &pdev->dev;
dp->dpsub = dpsub;
dp->status = connector_status_disconnected;
- dp->drm = drm;
INIT_DELAYED_WORK(&dp->hpd_work, zynqmp_dp_hpd_work_func);
@@ -1718,7 +1726,6 @@ void zynqmp_dp_remove(struct zynqmp_dpsub *dpsub)
disable_irq(dp->irq);
cancel_delayed_work_sync(&dp->hpd_work);
- zynqmp_dp_aux_cleanup(dp);
zynqmp_dp_write(dp, ZYNQMP_DP_TRANSMITTER_ENABLE, 0);
zynqmp_dp_write(dp, ZYNQMP_DP_INT_DS, 0xffffffff);
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list