[PATCH 36/36] arm64: dts: zynqmp: zcu106a: Describe DisplayPort connector
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Aug 9 01:34:57 UTC 2021
Add a device tree node to describe the DisplayPort connector, and
connect it to the DPSUB output.
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
.../boot/dts/xilinx/zynqmp-zcu106-revA.dts | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index eff7c6447087..aaf44ab256a1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -146,6 +146,18 @@ refhdmi: refhdmi {
#clock-cells = <0>;
clock-frequency = <114285000>;
};
+
+ dpcon {
+ compatible = "dp-connector";
+ label = "P11";
+ type = "full-size";
+
+ port {
+ dpcon_in: endpoint {
+ remote-endpoint = <&dpsub_dp_out>;
+ };
+ };
+ };
};
&can1 {
@@ -165,6 +177,14 @@ &zynqmp_dpsub {
phy-names = "dp-phy0", "dp-phy1";
phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
<&psgtr 0 PHY_TYPE_DP 1 3>;
+
+ ports {
+ port at 5 {
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dpcon_in>;
+ };
+ };
+ };
};
/* fpd_dma clk 667MHz, lpd_dma 500MHz */
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list