[PATCH v2 0/8] drm/bridge: Make panel and bridge probe order consistent
Andrzej Hajda
a.hajda at samsung.com
Mon Aug 9 12:03:59 UTC 2021
Hi Jagan,
W dniu 09.08.2021 o 10:00, Jagan Teki pisze:
> Hi Andrzej,
>
> On Wed, Aug 4, 2021 at 7:48 PM a.hajda <a.hajda at samsung.com> wrote:
>> Hi Maxime,
>>
>> I have been busy with other tasks, and I did not follow the list last
>> time, so sorry for my late response.
>>
>> On 28.07.2021 15:32, Maxime Ripard wrote:
>>> Hi,
>>>
>>> We've encountered an issue with the RaspberryPi DSI panel that prevented the
>>> whole display driver from probing.
>>>
>>> The issue is described in detail in the commit 7213246a803f ("drm/vc4: dsi:
>>> Only register our component once a DSI device is attached"), but the basic idea
>>> is that since the panel is probed through i2c, there's no synchronization
>>> between its probe and the registration of the MIPI-DSI host it's attached to.
>>>
>>> We initially moved the component framework registration to the MIPI-DSI Host
>>> attach hook to make sure we register our component only when we have a DSI
>>> device attached to our MIPI-DSI host, and then use lookup our DSI device in our
>>> bind hook.
>>>
>>> However, all the DSI bridges controlled through i2c are only registering their
>>> associated DSI device in their bridge attach hook, meaning with our change
>>
>> I guess this is incorrect. I have promoted several times the pattern
>> that device driver shouldn't expose its interfaces (for example
>> component_add, drm_panel_add, drm_bridge_add) until it gathers all
>> required dependencies. In this particular case bridges should defer
>> probe until DSI bus becomes available. I guess this way the patch you
>> reverts would work.
>>
>> I advised few times this pattern in case of DSI hosts, apparently I
>> didn't notice the similar issue can appear in case of bridges. Or there
>> is something I have missed???
> Look like Maxime is correct. I2C based DSI bridge will get probe
> during bridge_attach which usually called from bridge driver
> bridge_attach call. Non-I2C bridges and DSI panels will get probe
> during host.attach.
> We do get similar situation for dw-mipi-dsi bridges, where icn6211
> bridge is not I2C-based bridge and it gets probed in host_attach and
> sn65dsi83 is I2C based bridge and it gets probed in bridge_attach.
>
> Here is the simple call trace we have observed with dw-mipi-dsi bridge
> when all possible DSI device are trying to probe.
>
> 1. DSI panels and bridges will invoke the host attach
> from probe in order to find the panel_or_bridge.
>
> chipone_probe()
> dw_mipi_dsi_host_attach().start
> dw_mipi_dsi_panel_or_bridge()
> ...found the panel_or_bridge...
>
> ltdc_encoder_init().start
> dw_mipi_dsi_bridge_attach().start
> dw_mipi_dsi_host_attach().start
> chipone_attach(). start
>
> chipone_attach(). done
> dw_mipi_dsi_host_attach().done
> dw_mipi_dsi_bridge_attach(). done
> ltdc_encoder_init().done
>
> 2. I2C based DSI bridge will invoke the drm_bridge_attach
> from bridge attach in order to find the panel_or_bridge.
>
> ltdc_encoder_init().start
> dw_mipi_dsi_bridge_attach().start
> dw_mipi_dsi_panel_or_bridge()
> ...found the panel_or_bridge...
> dw_mipi_dsi_host_attach().start
> sn65dsi83_attach(). start
>
> sn65dsi83_attach(). done
> dw_mipi_dsi_host_attach().done
> dw_mipi_dsi_bridge_attach(). done
> ltdc_encoder_init().done
>
> It is correct that the I2C-based bridges will attach the host via
> mipi_dsi_attach in driver bridge API where as it done in probe for
> Non-I2C bridges and DSI panels.
The call order depends on the registration time of DSI host. In case of
dw-mipi-dsi it is called from .component_bind callback (dsi_bind->
dsi_host_init -> mipi_dsi_host_register). And this is "the original sin" :)
dw-mipi-dsi calls component_add without prior acquiring its dependency -
drm_bridge and before DSI host registration. In such situation bridge
author should follow this pattern and perform similar initialization:
first drm_bridge_add, then mipi_dsi_attach.
And now authors of bridges are in dead end in case they want their
bridge/panel drivers cooperate with dw-mipi-dsi host (with pattern look
for sink - bridge/panel, then register DSI bus) and with other DSI hosts
(most of then use pattern - register DSI bus then look for the sink -
panel or bridge).
Quick look at the DSI hosts suggests the pattern
get-sink-then-register-bus are used only by kirin/dw_drm_dsi.c and msm/dsi.
All other DSI hosts uses apparently register-bus-then-get-sink pattern -
as I said it was not profound analysis - just few greps of some keywords.
>> Anyway there are already eleven(?) bridge drivers using this pattern. I
>> wonder if fixing it would be difficult, or if it expose other issues???
>> The patches should be quite straightforward - move
>> of_find_mipi_dsi_host_by_node and mipi_dsi_device_register_full to probe
>> time.
>>
>> Finally I think that if we will not fix these bridge drivers we will
>> encounter another set of issues with new platforms connecting "DSI host
>> drivers assuming this pattern" and "i2c/dsi device drivers assuming
>> pattern already present in the bridges".
> Agreed, I'm trying to understand the several ways to fix this. Right
> now I'm trying this on sun6i_mipi_dsi and exynos_drm_dsi. Will let you
> know for any update and suggestions on the same.
Quick look at sun6i suggests it uses register-bus-then-get-sink pattern
(incompatible with kirin), only issue is that currently it support only
panel sink.
Exynos uses also register-bus-then-get-sink pattern, but it slightly
different as it supports dynamic attach/detach of sinks.
Regards
Andrzej
>
> Thanks,
> Jagan.
>
More information about the dri-devel
mailing list