[PATCH v3 0/6] add fixes to pass DP Link Layer compliance test cases

Jani Nikula jani.nikula at linux.intel.com
Wed Aug 11 07:20:12 UTC 2021


On Thu, 05 Aug 2021, Kuogee Hsieh <khsieh at codeaurora.org> wrote:
> add fixes to pass DP Link Layer compliance test cases

Nitpick, please also include the approriate subject prefix to the cover
letter, e.g. "drm/msm" or "drm/msm/dp". Helps with mail filtering. :)

BR,
Jani.

>
> Kuogee Hsieh (6):
>   drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run
>   drm/msm/dp: reduce link rate if failed at link training 1
>   drm/msm/dp: reset aux controller after dp_aux_cmd_fifo_tx() failed.
>   drm/msm/dp: replug event is converted into an unplug followed by an
>     plug events
>   drm/msm/dp: return correct edid checksum after corrupted edid checksum
>     read
>   drm/msm/dp: do not end dp link training until video is ready
>
>  drivers/gpu/drm/msm/dp/dp_aux.c     |   3 +
>  drivers/gpu/drm/msm/dp/dp_ctrl.c    | 137 +++++++++++++++++++++++-------------
>  drivers/gpu/drm/msm/dp/dp_display.c |  14 ++--
>  drivers/gpu/drm/msm/dp/dp_panel.c   |   9 ++-
>  4 files changed, 102 insertions(+), 61 deletions(-)

-- 
Jani Nikula, Intel Open Source Graphics Center


More information about the dri-devel mailing list