[RFC PATCH 06/17] drm/exynos: dsi: Handle exynos specifics via driver_data
Inki Dae
inki.dae at samsung.com
Fri Aug 13 06:50:56 UTC 2021
Hi,
21. 7. 26. 오전 2:25에 Sam Ravnborg 이(가) 쓴 글:
> On Sun, Jul 04, 2021 at 02:32:19PM +0530, Jagan Teki wrote:
>> Exynos DSI driver is actually a Samsung MIPI DSIM bridge
>> IP which is also used in i.MX8MM platforms.
>>
>> Right now the existing driver has some exynos drm specific
>> code bases like te_irq, crtc and component_ops.
>>
>> In order to switch this driver into a common bridge driver
>> We can see 2 options to handle the exynos specific code.
>>
>> A. Drop the component_ops, and rework other specifics.
>> This may lead to more foundation work as it requires
>> more changes in exynos drm drivers stack.
>>
>> B. Handle the exynos specifics via driver data, and make
>> the common bridge work in different platforms and plan
>> for option A in future.
>>
>> So, this patch is trying to add option B) changes to handle
>> exynos specifics via driver_data.
>
> We really should find someone that has the time, energy, knowledge and
> hardware that can include device_link support once anf for all for
> bridges.
> Then we would avoid hacks like this.
>
> I see no other options at the moment, but look forward for a better
> solution.
>
> Sam
>
I'm not sure that it's correct to share this mipi dsi driver with I.MX8MM SoC even though it's a same IP because this MIPI DSI device isn't peripheral device but in SoC.
It would mean that Exynos MIPI DSI device depends on SoC architecture, and Exynos and I.MX series are totally different SoC. So if we share the same driver for the MIPI DSI device then many things we didn't predict may happen in the future. I don't want to make Jagan's efforts in vain for the community but clarify whether this is correct way or not. If this is only the way we have to go then we could more focus on actual solution not such hack. Impossible work with Jagan alone I think.
So let's get started with a question,
- Is MIPI-DSI bridge device or Encoder device? I think that MIPI-DSI is a Encoder device managed by atomic KMS. If MIPI-DSI should be handled as bridge device then does now drm bridge framework provide everything to share one driver with one more SoC? I mean something that drm bridge has to consider for such driver support, which is shared with one more SoC.
And Display mode - VIDEO and COMMAND mode - is generic type of MIPI DSI, and also componentised subsystem is a generic solution to resolve probing order issue not Exynos specific feature. These are driver specific ones not Exynos SoC I think. As SoC specific things should be considered, I think MIPI DSI Driver - interrupt handler and probing order things are really specific to device driver - should be separated but we could share the control part of the device.
I was busy with other projects so didn't care of Linux DRM world so there may be my missing something.
Thanks,
Inki Dae
>
>>
>> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>> ---
>> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 37 +++++++++++++++++++------
>> 1 file changed, 29 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> index 99a1b8c22313..53d878d4d2d7 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> @@ -250,6 +250,7 @@ struct exynos_dsi_driver_data {
>> unsigned int wait_for_reset;
>> unsigned int num_bits_resol;
>> const unsigned int *reg_values;
>> + bool exynos_specific;
>> };
>>
>> struct exynos_dsi {
>> @@ -459,6 +460,7 @@ static const struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
>> .wait_for_reset = 1,
>> .num_bits_resol = 11,
>> .reg_values = reg_values,
>> + .exynos_specific = true,
>> };
>>
>> static const struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
>> @@ -471,6 +473,7 @@ static const struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
>> .wait_for_reset = 1,
>> .num_bits_resol = 11,
>> .reg_values = reg_values,
>> + .exynos_specific = true,
>> };
>>
>> static const struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
>> @@ -481,6 +484,7 @@ static const struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
>> .wait_for_reset = 1,
>> .num_bits_resol = 11,
>> .reg_values = reg_values,
>> + .exynos_specific = true,
>> };
>>
>> static const struct exynos_dsi_driver_data exynos5433_dsi_driver_data = {
>> @@ -492,6 +496,7 @@ static const struct exynos_dsi_driver_data exynos5433_dsi_driver_data = {
>> .wait_for_reset = 0,
>> .num_bits_resol = 12,
>> .reg_values = exynos5433_reg_values,
>> + .exynos_specific = true,
>> };
>>
>> static const struct exynos_dsi_driver_data exynos5422_dsi_driver_data = {
>> @@ -503,6 +508,7 @@ static const struct exynos_dsi_driver_data exynos5422_dsi_driver_data = {
>> .wait_for_reset = 1,
>> .num_bits_resol = 12,
>> .reg_values = exynos5422_reg_values,
>> + .exynos_specific = true,
>> };
>>
>> static const struct of_device_id exynos_dsi_of_match[] = {
>> @@ -1484,7 +1490,8 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
>> * If attached panel device is for command mode one, dsi should register
>> * TE interrupt handler.
>> */
>> - if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO)) {
>> + if (dsi->driver_data->exynos_specific &&
>> + !(device->mode_flags & MIPI_DSI_MODE_VIDEO)) {
>> int ret = exynos_dsi_register_te_irq(dsi, &device->dev);
>> if (ret)
>> return ret;
>> @@ -1495,8 +1502,9 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
>> dsi->lanes = device->lanes;
>> dsi->format = device->format;
>> dsi->mode_flags = device->mode_flags;
>> - exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode =
>> - !(dsi->mode_flags & MIPI_DSI_MODE_VIDEO);
>> + if (dsi->driver_data->exynos_specific)
>> + exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode =
>> + !(dsi->mode_flags & MIPI_DSI_MODE_VIDEO);
>>
>> mutex_unlock(&drm->mode_config.mutex);
>>
>> @@ -1515,7 +1523,8 @@ static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
>> if (drm->mode_config.poll_enabled)
>> drm_kms_helper_hotplug_event(drm);
>>
>> - exynos_dsi_unregister_te_irq(dsi);
>> + if (dsi->driver_data->exynos_specific)
>> + exynos_dsi_unregister_te_irq(dsi);
>>
>> return 0;
>> }
>> @@ -1737,6 +1746,15 @@ static int exynos_dsi_probe(struct platform_device *pdev)
>> if (ret)
>> return ret;
>>
>> + if (!dsi->driver_data->exynos_specific) {
>> + ret = mipi_dsi_host_register(&dsi->dsi_host);
>> + if (ret) {
>> + dev_err(dev, "failed to register mipi dsi host: %d\n",
>> + ret);
>> + return ret;
>> + }
>> + }
>> +
>> platform_set_drvdata(pdev, dsi);
>>
>> pm_runtime_enable(dev);
>> @@ -1747,9 +1765,11 @@ static int exynos_dsi_probe(struct platform_device *pdev)
>>
>> drm_bridge_add(&dsi->bridge);
>>
>> - ret = component_add(dev, &exynos_dsi_component_ops);
>> - if (ret)
>> - goto err_disable_runtime;
>> + if (dsi->driver_data->exynos_specific) {
>> + ret = component_add(dev, &exynos_dsi_component_ops);
>> + if (ret)
>> + goto err_disable_runtime;
>> + }
>>
>> return 0;
>>
>> @@ -1767,7 +1787,8 @@ static int exynos_dsi_remove(struct platform_device *pdev)
>>
>> pm_runtime_disable(&pdev->dev);
>>
>> - component_del(&pdev->dev, &exynos_dsi_component_ops);
>> + if (dsi->driver_data->exynos_specific)
>> + component_del(&pdev->dev, &exynos_dsi_component_ops);
>>
>> return 0;
>> }
>> --
>> 2.25.1
>
More information about the dri-devel
mailing list