[PATCH] drm/arm/malidp: fix mode_valid couldn't cull invalid modes issue
Liviu Dudau
liviu.dudau at arm.com
Fri Aug 13 17:06:25 UTC 2021
On Tue, Aug 10, 2021 at 10:43:31AM +0800, Sandor.yu at nxp.com wrote:
> From: Sandor Yu <Sandor.yu at nxp.com>
>
> In function malidp_crtc_mode_valid, mode->crtc_mode = 0 when run
> in drm_helper_probe_single_connector_modes.
> Invalid video modes are not culled
> and all modes move to the connector's modes list.
> It is not expected by mode_valid.
>
> Replace mode->crtc_clock with mode->clock to fix the issue.
>
> Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
It looks like at least drm/bridge/cdns-dsi.c does the same thing of using
mode->clock when validating, so looks like a legit bug.
Acked-by: Liviu Dudau <liviu.dudau at arm.com>
Many thanks,
Liviu
> ---
> drivers/gpu/drm/arm/malidp_crtc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/arm/malidp_crtc.c b/drivers/gpu/drm/arm/malidp_crtc.c
> index 494075ddbef6..55890334385d 100644
> --- a/drivers/gpu/drm/arm/malidp_crtc.c
> +++ b/drivers/gpu/drm/arm/malidp_crtc.c
> @@ -31,7 +31,7 @@ static enum drm_mode_status malidp_crtc_mode_valid(struct drm_crtc *crtc,
> * check that the hardware can drive the required clock rate,
> * but skip the check if the clock is meant to be disabled (req_rate = 0)
> */
> - long rate, req_rate = mode->crtc_clock * 1000;
> + long rate, req_rate = mode->clock * 1000;
>
> if (req_rate) {
> rate = clk_round_rate(hwdev->pxlclk, req_rate);
> --
> 2.17.1
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
More information about the dri-devel
mailing list