[PATCH v3 5/9] dt-bindings: display: Add ingenic-jz4780-hdmi DT Schema

[Rob Herring]

On Sun, Aug 08, 2021 at 07:10:39AM +0200, H. Nikolaus Schaller wrote:
> From: Sam Ravnborg <sam at ravnborg.org>
> 
> Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC.
> Based on .txt binding from Zubair Lutfullah Kakakhel
> 
> Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
> Cc: Rob Herring <robh at kernel.org>
> Cc: devicetree at vger.kernel.org
> ---
>  .../bindings/display/ingenic-jz4780-hdmi.yaml | 82 +++++++++++++++++++
>  1 file changed, 82 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
> new file mode 100644
> index 0000000000000..a545ff8704ebd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml
> @@ -0,0 +1,82 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/ingenic-jz4780-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bindings for Ingenic JZ4780 HDMI Transmitter
> +
> +maintainers:
> +  - H. Nikolaus Schaller <hns at goldelico.com>
> +
> +description: |
> +  The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4
> +  TX controller IP with accompanying PHY IP.
> +
> +allOf:
> +  - $ref: panel/panel-common.yaml#

This isn't a panel...

> +
> +properties:
> +  compatible:
> +    items:
> +      - const: ingenic,jz4780-hdmi
> +
> +  reg:
> +    maxItems: 1
> +    description: the address & size of the LCD controller registers

Drop. Don't need generic descriptions. Plus, this isn't an LCD 
controller.

> +
> +  reg-io-width:
> +    const: 4
> +
> +  interrupts:
> +    maxItems: 1
> +    description: Specifies the interrupt provided by parent

Drop. Don't need generic descriptions.

> +
> +  clocks:
> +    maxItems: 2
> +    description: Clock specifiers for isrf and iahb clocks
> +
> +  clock-names:
> +    items:
> +      - const: isfr
> +      - const: iahb
> +
> +  ddc-i2c-bus: true

This belongs in a connector or panel node.

> +  ports: true

You have to define what each 'port' node is and reference the graph 
schema. Given you are using 'ports', I assume there is more than 1. The 
example says not, but you need to add an output port for a connector 
node.

> +
> +required:
> +    - compatible
> +    - clocks
> +    - clock-names
> +    - ports
> +    - reg-io-width
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/jz4780-cgu.h>
> +
> +    hdmi: hdmi at 10180000 {
> +        compatible = "ingenic,jz4780-hdmi";
> +        reg = <0x10180000 0x8000>;
> +        reg-io-width = <4>;
> +        ddc-i2c-bus = <&i2c4>;
> +        interrupt-parent = <&intc>;
> +        interrupts = <3>;
> +        clocks = <&cgu JZ4780_CLK_HDMI>, <&cgu JZ4780_CLK_AHB0>;
> +        clock-names = "isfr", "iahb";
> +
> +        ports {
> +            hdmi_in: port {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                hdmi_in_lcd: endpoint at 0 {
> +                    reg = <0>;
> +                    remote-endpoint = <&jz4780_out_hdmi>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> -- 
> 2.31.1
> 
>