[PATCH 22/22] drm/i915/guc: Add GuC kernel doc
Daniel Vetter
daniel at ffwll.ch
Tue Aug 17 11:11:41 UTC 2021
On Mon, Aug 16, 2021 at 06:51:39AM -0700, Matthew Brost wrote:
> Add GuC kernel doc for all structures added thus far for GuC submission
> and update the main GuC submission section with the new interface
> details.
>
> Signed-off-by: Matthew Brost <matthew.brost at intel.com>
There's quite a bit more, e.g. intel_guc_ct, which has it's own world of
locking design that also doesn't feel too consistent.
> ---
> drivers/gpu/drm/i915/gt/intel_context_types.h | 42 +++++---
> drivers/gpu/drm/i915/gt/uc/intel_guc.h | 19 +++-
> .../gpu/drm/i915/gt/uc/intel_guc_submission.c | 101 ++++++++++++++----
> drivers/gpu/drm/i915/i915_request.h | 18 ++--
> 4 files changed, 131 insertions(+), 49 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/intel_context_types.h b/drivers/gpu/drm/i915/gt/intel_context_types.h
> index f6989e6807f7..75d609a1bc33 100644
> --- a/drivers/gpu/drm/i915/gt/intel_context_types.h
> +++ b/drivers/gpu/drm/i915/gt/intel_context_types.h
> @@ -156,44 +156,56 @@ struct intel_context {
> u8 wa_bb_page; /* if set, page num reserved for context workarounds */
>
> struct {
> - /** lock: protects everything in guc_state */
> + /** @lock: protects everything in guc_state */
> spinlock_t lock;
> /**
> - * sched_state: scheduling state of this context using GuC
> + * @sched_state: scheduling state of this context using GuC
> * submission
> */
> u32 sched_state;
> /*
> - * fences: maintains of list of requests that have a submit
> - * fence related to GuC submission
> + * @fences: maintains a list of requests are currently being
> + * fenced until a GuC operation completes
> */
> struct list_head fences;
> - /* GuC context blocked fence */
> + /**
> + * @blocked_fence: fence used to signal when the blocking of a
> + * contexts submissions is complete.
> + */
> struct i915_sw_fence blocked_fence;
> - /* GuC committed requests */
> + /** @number_committed_requests: number of committed requests */
> int number_committed_requests;
> } guc_state;
>
> struct {
> - /** lock: protects everything in guc_active */
> + /** @lock: protects everything in guc_active */
> spinlock_t lock;
Why do we have two locks spinlocks to protect guc context state?
I do understand the need for a spinlock (at least for now) because of how
i915-scheduler runs in tasklet context. But beyond that we really
shouldn't need more than two locks to protect context state. You still
have an entire pile here, plus some atomics, plus more.
And this is on a single context, where concurrently submitting stuff
really isn't a thing. I'd expect actual benchmarking would show a perf
hit, since all these locks and atomics aren't free. This is at least the
case with execbuf and the various i915_vma locks we currently have.
What I expect intel_context locking to be is roughly:
- One lock to protect all intel_context state. This probably should be a
dma_resv_lock for a few reasons, least so we can pin state objects
underneath that lock.
- A separate lock if there's anything you need to coordinate with the
backend scheduler while that's running, to avoid dma_fence inversions.
Right now this separate lock might need to be a spinlock because our
scheduler runs in tasklets, and that might mean we need both a mutex and
a spinlock here.
Anything that goes beyond that is premature optimization and kills us code
complexity vise. I'd be _extremely_ surprised if an IA core cannot keep up
with GuC, and therefore anything that goes beyond "one lock per object",
plus/minus execution context issues like the above tasklet issue, is
likely just going to slow everything down.
> - /** requests: active requests on this context */
> + /** @requests: list of active requests on this context */
> struct list_head requests;
> - /*
> - * GuC priority management
> - */
> + /** @guc_prio: the contexts current guc priority */
> u8 guc_prio;
> + /**
> + * @guc_prio_count: a counter of the number requests inflight in
> + * each priority bucket
> + */
> u32 guc_prio_count[GUC_CLIENT_PRIORITY_NUM];
> } guc_active;
>
> - /* GuC LRC descriptor ID */
> + /**
> + * @guc_id: unique handle which is used to communicate information with
> + * the GuC about this context, protected by guc->contexts_lock
> + */
> u16 guc_id;
>
> - /* GuC LRC descriptor reference count */
> + /**
> + * @guc_id_ref: the number of references to the guc_id, when
> + * transitioning in and out of zero protected by guc->contexts_lock
> + */
> atomic_t guc_id_ref;
All this guc_id related stuff (including the guc->context_lookup xarray I
guess) also has quite a pile of atomics and locks.
>
> - /*
> - * GuC ID link - in list when unpinned but guc_id still valid in GuC
> + /**
> + * @guc_id_link: in guc->guc_id_list when the guc_id has no refs but is
> + * still valid, protected by guc->contexts_lock
> */
> struct list_head guc_id_link;
>
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc.h b/drivers/gpu/drm/i915/gt/uc/intel_guc.h
> index 2e27fe59786b..c0b3fdb601f0 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_guc.h
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc.h
> @@ -41,6 +41,10 @@ struct intel_guc {
> spinlock_t irq_lock;
> unsigned int msg_enabled_mask;
>
> + /**
> + * @outstanding_submission_g2h: number of outstanding G2H related to GuC
> + * submission, used to determine if the GT is idle
> + */
> atomic_t outstanding_submission_g2h;
atomic_t is good for statistcs, but not for code flow control. If you use
if for that you either need a lot of barriers and comments, which means
there needs to be some real perf numbers showing that this is required in
a workload we care about.
Or you stuff this into a related lock. E.g. from high-level view stuff
this into intel_guc_ct (which also has definitely way more locks than it
needs) could make sense?
>
> struct {
> @@ -49,12 +53,16 @@ struct intel_guc {
> void (*disable)(struct intel_guc *guc);
> } interrupts;
>
> - /*
> - * contexts_lock protects the pool of free guc ids and a linked list of
> - * guc ids available to be stolen
> + /**
> + * @contexts_lock: protects guc_ids, guc_id_list, ce->guc_id, and
> + * ce->guc_id_ref when transitioning in and out of zero
> */
> spinlock_t contexts_lock;
> + /** @guc_ids: used to allocate new guc_ids */
> struct ida guc_ids;
> + /**
> + * @guc_id_list: list of intel_context with valid guc_ids but no refs
> + */
> struct list_head guc_id_list;
>
> bool submission_supported;
> @@ -70,7 +78,10 @@ struct intel_guc {
> struct i915_vma *lrc_desc_pool;
> void *lrc_desc_pool_vaddr;
>
> - /* guc_id to intel_context lookup */
> + /**
> + * @context_lookup: used to intel_context from guc_id, if a context is
> + * present in this structure it is registered with the GuC
> + */
> struct xarray context_lookup;
>
> /* Control params for fw initialization */
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
> index eb06a4c7534e..18ef363c6e5d 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
> @@ -28,21 +28,6 @@
> /**
> * DOC: GuC-based command submission
> *
> - * IMPORTANT NOTE: GuC submission is currently not supported in i915. The GuC
> - * firmware is moving to an updated submission interface and we plan to
> - * turn submission back on when that lands. The below documentation (and related
> - * code) matches the old submission model and will be updated as part of the
> - * upgrade to the new flow.
> - *
> - * GuC stage descriptor:
> - * During initialization, the driver allocates a static pool of 1024 such
> - * descriptors, and shares them with the GuC. Currently, we only use one
> - * descriptor. This stage descriptor lets the GuC know about the workqueue and
> - * process descriptor. Theoretically, it also lets the GuC know about our HW
> - * contexts (context ID, etc...), but we actually employ a kind of submission
> - * where the GuC uses the LRCA sent via the work item instead. This is called
> - * a "proxy" submission.
> - *
> * The Scratch registers:
> * There are 16 MMIO-based registers start from 0xC180. The kernel driver writes
> * a value to the action register (SOFT_SCRATCH_0) along with any data. It then
> @@ -51,14 +36,86 @@
> * processes the request. The kernel driver polls waiting for this update and
> * then proceeds.
> *
> - * Work Items:
> - * There are several types of work items that the host may place into a
> - * workqueue, each with its own requirements and limitations. Currently only
> - * WQ_TYPE_INORDER is needed to support legacy submission via GuC, which
> - * represents in-order queue. The kernel driver packs ring tail pointer and an
> - * ELSP context descriptor dword into Work Item.
> - * See guc_add_request()
> + * Command Transport buffers (CTBs):
> + * Covered in detail in other sections but CTBs (host-to-guc, H2G, guc-to-host
> + * G2H) are a message interface between the i915 and GuC used to controls
> + * submissions.
> + *
> + * Context registration:
> + * Before a context can be submitted it must be registered with the GuC via a
> + * H2G. A unique guc_id is associated with each context. The context is either
> + * registered at request creation time (normal operation) or at submission time
> + * (abnormal operation, e.g. after a reset).
> + *
> + * Context submission:
> + * The i915 updates the LRC tail value in memory. Either a schedule enable H2G
> + * or context submit H2G is used to submit a context.
> + *
> + * Context unpin:
> + * To unpin a context a H2G is used to disable scheduling and when the
> + * corresponding G2H returns indicating the scheduling disable operation has
> + * completed it is safe to unpin the context. While a disable is in flight it
> + * isn't safe to resubmit the context so a fence is used to stall all future
> + * requests until the G2H is returned.
> + *
> + * Context deregistration:
> + * Before a context can be destroyed or we steal its guc_id we must deregister
> + * the context with the GuC via H2G. If stealing the guc_id it isn't safe to
> + * submit anything to this guc_id until the deregister completes so a fence is
> + * used to stall all requests associated with this guc_ids until the
> + * corresponding G2H returns indicating the guc_id has been deregistered.
> + *
> + * guc_ids:
> + * Unique number associated with private GuC context data passed in during
> + * context registration / submission / deregistration. 64k available. Simple ida
> + * is used for allocation.
> + *
> + * Stealing guc_ids:
> + * If no guc_ids are available they can be stolen from another context at
> + * request creation time if that context is unpinned. If a guc_id can't be found
> + * we punt this problem to the user as we believe this is near impossible to hit
> + * during normal use cases.
> + *
> + * Locking:
> + * In the GuC submission code we have 4 basic spin locks which protect
> + * everything. Details about each below.
> + *
> + * sched_engine->lock
> + * This is the submission lock for all contexts that share a i915 schedule
> + * engine (sched_engine), thus only 1 context which share a sched_engine can be
> + * submitting at a time. Currently only 1 sched_engine used for all of GuC
> + * submission but that could change in the future.
There's at least 3 more spinlocks for intel_guc_ct ...
> + *
> + * guc->contexts_lock
> + * Protects guc_id allocation. Global lock i.e. Only 1 context that uses GuC
> + * submission can hold this at a time.
Plus you forgot the spinlock of the xarrray, which is also used in the
code with this patch set, not just internally in the xarray, so we have to
think about that one too.
Iow still way too many locks.
> + *
> + * ce->guc_state.lock
> + * Protects everything under ce->guc_state. Ensures that a context is in the
> + * correct state before issuing a H2G. e.g. We don't issue a schedule disable
> + * on disabled context (bad idea), we don't issue schedule enable when a
> + * schedule disable is inflight, etc... Lock individual to each context.
> + *
> + * ce->guc_active.lock
> + * Protects everything under ce->guc_active which is the current requests
> + * inflight on the context / priority management. Lock individual to each
> + * context.
> + *
> + * Lock ordering rules:
> + * sched_engine->lock -> ce->guc_active.lock
> + * sched_engine->lock -> ce->guc_state.lock
> + * guc->contexts_lock -> ce->guc_state.lock
> *
> + * Reset races:
> + * When a GPU full reset is triggered it is assumed that some G2H responses to
> + * a H2G can be lost as the GuC is likely toast. Losing these G2H can prove to
> + * fatal as we do certain operations upon receiving a G2H (e.g. destroy
> + * contexts, release guc_ids, etc...). Luckly when this occurs we can scrub
> + * context state and cleanup appropriately, however this is quite racey. To
> + * avoid races the rules are check for submission being disabled (i.e. check for
> + * mid reset) with the appropriate lock being held. If submission is disabled
> + * don't send the H2G or update the context state. The reset code must disable
> + * submission and grab all these locks before scrubbing for the missing G2H.
Can we make this all a lot less racy? Instead of a huge state machinery
can't we just do all that under a context look, i.e.
1. take context lock
2. send guc message that is tricky, like register or deregister or
whatever
3. wait for that reply, our context is blocked anyway, no harm holding a
lock, other contexts can keep processing
4. the lower-level guc_ct code guarantees that we either get the reply, or
a -ERESET or whatever indicating that we raced with a reset, in which case
we can just restart whatever it is we wanted to do (or for deregister, do
nothing since the guc reset has solved that problem)
5. unlock
Massively lockless state machines are cool, but also very hard to maintain
and keep correct.
-Daniel
> */
>
> /* GuC Virtual Engine */
> diff --git a/drivers/gpu/drm/i915/i915_request.h b/drivers/gpu/drm/i915/i915_request.h
> index d818cfbfc41d..177eaf55adff 100644
> --- a/drivers/gpu/drm/i915/i915_request.h
> +++ b/drivers/gpu/drm/i915/i915_request.h
> @@ -290,18 +290,20 @@ struct i915_request {
> struct hrtimer timer;
> } watchdog;
>
> - /*
> - * Requests may need to be stalled when using GuC submission waiting for
> - * certain GuC operations to complete. If that is the case, stalled
> - * requests are added to a per context list of stalled requests. The
> - * below list_head is the link in that list.
> + /**
> + * @guc_fence_link: Requests may need to be stalled when using GuC
> + * submission waiting for certain GuC operations to complete. If that is
> + * the case, stalled requests are added to a per context list of stalled
> + * requests. The below list_head is the link in that list. Protected by
> + * ce->guc_state.lock.
> */
> struct list_head guc_fence_link;
>
> /**
> - * Priority level while the request is inflight. Differs from i915
> - * scheduler priority. See comment above
> - * I915_SCHEDULER_CAP_STATIC_PRIORITY_MAP for details.
> + * @guc_prio: Priority level while the request is inflight. Differs from
> + * i915 scheduler priority. See comment above
> + * I915_SCHEDULER_CAP_STATIC_PRIORITY_MAP for details. Protected by
> + * ce->guc_active.lock.
> */
> #define GUC_PRIO_INIT 0xff
> #define GUC_PRIO_FINI 0xfe
> --
> 2.32.0
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list