[PATCH v2 1/2] dt-bindings: add bindings for the Sharp LS060T1SX01 panel

[Rob Herring]

On Mon, Aug 09, 2021 at 09:47:11PM +0300, Dmitry Baryshkov wrote:
> Add devicetree bindings for the Sharp LS060T1SX01 6.0" FullHD panel
> using NT35695 driver. This panel can be found i.e. in the Dragonboard
> Display Adapter bundle.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  .../display/panel/sharp,ls060t1sx01.yaml      | 51 +++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
> new file mode 100644
> index 000000000000..c4af5e7f6f39
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/sharp,ls060t1sx01.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sharp Microelectronics 6.0" FullHD TFT LCD panel
> +
> +maintainers:
> +  - Dmitry Baryskov <dmitry.baryshkov at linaro.org>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: sharp,ls060t1sx01
> +
> +  reg: true
> +  backlight: true
> +  reset-gpios: true
> +  port: true
> +
> +  avdd-supply:
> +    description: handle of the regulator that provides the supply voltage

Single supply? Use simple-panel binding. Or are your supplies 
incomplete?

> +
> +required:
> +  - compatible
> +  - reg
> +  - avdd-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        panel at 0 {
> +            compatible = "sharp,ls060t1sx01";
> +            reg = <0>;
> +            avdd-supply = <&pm8941_l22>;
> +            backlight = <&backlight>;
> +            reset-gpios = <&pm8916_gpios 25 GPIO_ACTIVE_LOW>;
> +        };
> +    };
> +
> +...
> -- 
> 2.30.2
> 
>