[PATCH 1/2] drm/probe-helper: Create a HPD IRQ event helper for a single connector

[Maxime Ripard]

The drm_helper_hpd_irq_event() function is iterating over all the
connectors when an hotplug event is detected.

During that iteration, it will call each connector detect function and
figure out if its status changed.

Finally, if any connector changed, it will notify the user-space and the
clients that something changed on the DRM device.

This is supposed to be used for drivers that don't have a hotplug
interrupt for individual connectors. However, drivers that can use an
interrupt for a single connector are left in the dust and can either
reimplement the logic used during the iteration for each connector or
use that helper and iterate over all connectors all the time.

Since both are suboptimal, let's create a helper that will only perform
the status detection on a single connector.

Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 drivers/gpu/drm/drm_probe_helper.c | 105 ++++++++++++++++++++---------
 include/drm/drm_probe_helper.h     |   1 +
 2 files changed, 74 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 5606bca3caa8..7e3cbb4333ce 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -795,6 +795,77 @@ void drm_kms_helper_poll_fini(struct drm_device *dev)
 }
 EXPORT_SYMBOL(drm_kms_helper_poll_fini);
 
+static bool
+_drm_connector_helper_hpd_irq_event(struct drm_connector *connector,
+				    bool notify)
+{
+	struct drm_device *dev = connector->dev;
+	enum drm_connector_status old_status;
+	u64 old_epoch_counter;
+	bool changed = false;
+
+	/* Only handle HPD capable connectors. */
+	drm_WARN_ON(dev, !(connector->polled & DRM_CONNECTOR_POLL_HPD));
+
+	drm_WARN_ON(dev, !mutex_is_locked(&dev->mode_config.mutex));
+
+	old_status = connector->status;
+	old_epoch_counter = connector->epoch_counter;
+
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Old epoch counter %llu\n",
+		      connector->base.id,
+		      connector->name,
+		      old_epoch_counter);
+
+	connector->status = drm_helper_probe_detect(connector, NULL,
+						    false);
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
+		      connector->base.id,
+		      connector->name,
+		      drm_get_connector_status_name(old_status),
+		      drm_get_connector_status_name(connector->status));
+
+	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] New epoch counter %llu\n",
+		      connector->base.id,
+		      connector->name,
+		      connector->epoch_counter);
+
+	/*
+	 * Check if epoch counter had changed, meaning that we need
+	 * to send a uevent.
+	 */
+	if (old_epoch_counter != connector->epoch_counter)
+		changed = true;
+
+	if (changed && notify) {
+		drm_kms_helper_hotplug_event(dev);
+		DRM_DEBUG_KMS("Sent hotplug event\n");
+	}
+
+	return changed;
+}
+
+/**
+ * drm_connector_helper_hpd_irq_event - hotplug processing
+ * @connector: drm_connector
+ *
+ * Drivers can use this helper function to run a detect cycle on a connector
+ * which has the DRM_CONNECTOR_POLL_HPD flag set in its &polled member.
+ *
+ * This helper function is useful for drivers which can track hotplug
+ * interrupts for a single connector.
+ *
+ * This function must be called with the mode setting locks held.
+ *
+ * Note that a connector can be both polled and probed from the hotplug
+ * handler, in case the hotplug interrupt is known to be unreliable.
+ */
+bool drm_connector_helper_hpd_irq_event(struct drm_connector *connector)
+{
+	return _drm_connector_helper_hpd_irq_event(connector, true);
+}
+EXPORT_SYMBOL(drm_connector_helper_hpd_irq_event);
+
 /**
  * drm_helper_hpd_irq_event - hotplug processing
  * @dev: drm_device
@@ -822,9 +893,7 @@ bool drm_helper_hpd_irq_event(struct drm_device *dev)
 {
 	struct drm_connector *connector;
 	struct drm_connector_list_iter conn_iter;
-	enum drm_connector_status old_status;
 	bool changed = false;
-	u64 old_epoch_counter;
 
 	if (!dev->mode_config.poll_enabled)
 		return false;
@@ -832,37 +901,9 @@ bool drm_helper_hpd_irq_event(struct drm_device *dev)
 	mutex_lock(&dev->mode_config.mutex);
 	drm_connector_list_iter_begin(dev, &conn_iter);
 	drm_for_each_connector_iter(connector, &conn_iter) {
-		/* Only handle HPD capable connectors. */
-		if (!(connector->polled & DRM_CONNECTOR_POLL_HPD))
-			continue;
-
-		old_status = connector->status;
-
-		old_epoch_counter = connector->epoch_counter;
-
-		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Old epoch counter %llu\n", connector->base.id,
-			      connector->name,
-			      old_epoch_counter);
-
-		connector->status = drm_helper_probe_detect(connector, NULL, false);
-		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
-			      connector->base.id,
-			      connector->name,
-			      drm_get_connector_status_name(old_status),
-			      drm_get_connector_status_name(connector->status));
-
-		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] New epoch counter %llu\n",
-			      connector->base.id,
-			      connector->name,
-			      connector->epoch_counter);
-
-		/*
-		 * Check if epoch counter had changed, meaning that we need
-		 * to send a uevent.
-		 */
-		if (old_epoch_counter != connector->epoch_counter)
+		if (_drm_connector_helper_hpd_irq_event(connector,
+							false))
 			changed = true;
-
 	}
 	drm_connector_list_iter_end(&conn_iter);
 	mutex_unlock(&dev->mode_config.mutex);
diff --git a/include/drm/drm_probe_helper.h b/include/drm/drm_probe_helper.h
index 8d3ed2834d34..04c57564c397 100644
--- a/include/drm/drm_probe_helper.h
+++ b/include/drm/drm_probe_helper.h
@@ -18,6 +18,7 @@ int drm_helper_probe_detect(struct drm_connector *connector,
 void drm_kms_helper_poll_init(struct drm_device *dev);
 void drm_kms_helper_poll_fini(struct drm_device *dev);
 bool drm_helper_hpd_irq_event(struct drm_device *dev);
+bool drm_connector_helper_hpd_irq_event(struct drm_connector *connector);
 void drm_kms_helper_hotplug_event(struct drm_device *dev);
 
 void drm_kms_helper_poll_disable(struct drm_device *dev);
-- 
2.31.1