[PATCH 50/53] drm/i915/display/dsc: Add Per connector debugfs node for DSC BPP enable
Kulkarni, Vandita
vandita.kulkarni at intel.com
Mon Aug 23 05:42:20 UTC 2021
Now, this change and changes from patch 51 of this series is taken care as part of the below series
https://patchwork.freedesktop.org/series/92750/
and merged.
Thanks,
Vandita
> -----Original Message-----
> From: Jani Nikula <jani.nikula at linux.intel.com>
> Sent: Friday, July 2, 2021 1:50 PM
> To: Roper, Matthew D <matthew.d.roper at intel.com>; intel-
> gfx at lists.freedesktop.org
> Cc: Patnana, Venkata Sai <venkata.sai.patnana at intel.com>; Srivatsa, Anusha
> <anusha.srivatsa at intel.com>; dri-devel at lists.freedesktop.org; Navare,
> Manasi D <manasi.d.navare at intel.com>; Kulkarni, Vandita
> <vandita.kulkarni at intel.com>
> Subject: Re: [PATCH 50/53] drm/i915/display/dsc: Add Per connector debugfs
> node for DSC BPP enable
>
> On Thu, 01 Jul 2021, Matt Roper <matthew.d.roper at intel.com> wrote:
> > From: Anusha Srivatsa <anusha.srivatsa at intel.com>
> >
> > DSC can be supported per DP connector. This patch creates a per
> > connector debugfs node to expose the Input and Compressed BPP.
> >
> > The same node can be used from userspace to force DSC to a certain
> > BPP.
> >
> > force_dsc_bpp is written through this debugfs node to force DSC BPP to
> > all accepted values
>
> I think this patch needs rework, and it's independent of the rest of the
> series. Please just drop this one and the next.
>
> BR,
> Jani.
>
> >
> > Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
> > Cc: Manasi Navare <manasi.d.navare at intel.com>
> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
> > Signed-off-by: Patnana Venkata Sai <venkata.sai.patnana at intel.com>
> > Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
> > ---
> > .../drm/i915/display/intel_display_debugfs.c | 103 +++++++++++++++++-
> > .../drm/i915/display/intel_display_types.h | 1 +
> > 2 files changed, 103 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > index af9e58619667..1805d70ea817 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > @@ -2389,6 +2389,100 @@ static const struct file_operations
> i915_dsc_fec_support_fops = {
> > .write = i915_dsc_fec_support_write
> > };
> >
> > +static int i915_dsc_bpp_support_show(struct seq_file *m, void *data)
> > +{
> > + struct drm_connector *connector = m->private;
> > + struct drm_device *dev = connector->dev;
> > + struct drm_crtc *crtc;
> > + struct intel_dp *intel_dp;
> > + struct drm_modeset_acquire_ctx ctx;
> > + struct intel_crtc_state *crtc_state = NULL;
> > + int ret = 0;
> > + bool try_again = false;
> > +
> > + drm_modeset_acquire_init(&ctx,
> DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
> > +
> > + do {
> > + try_again = false;
> > + ret = drm_modeset_lock(&dev-
> >mode_config.connection_mutex,
> > + &ctx);
> > + if (ret) {
> > + ret = -EINTR;
> > + break;
> > + }
> > + crtc = connector->state->crtc;
> > + if (connector->status != connector_status_connected ||
> !crtc) {
> > + ret = -ENODEV;
> > + break;
> > + }
> > + ret = drm_modeset_lock(&crtc->mutex, &ctx);
> > + if (ret == -EDEADLK) {
> > + ret = drm_modeset_backoff(&ctx);
> > + if (!ret) {
> > + try_again = true;
> > + continue;
> > + }
> > + break;
> > + } else if (ret) {
> > + break;
> > + }
> > + intel_dp =
> intel_attached_dp(to_intel_connector(connector));
> > + crtc_state = to_intel_crtc_state(crtc->state);
> > + seq_printf(m, "Input_BPP: %d\n", crtc_state->pipe_bpp);
> > + seq_printf(m, "Compressed_BPP: %d\n",
> > + crtc_state->dsc.compressed_bpp);
> > + } while (try_again);
> > +
> > + drm_modeset_drop_locks(&ctx);
> > + drm_modeset_acquire_fini(&ctx);
> > +
> > + return ret;
> > +}
> > +
> > +static ssize_t i915_dsc_bpp_support_write(struct file *file,
> > + const char __user *ubuf,
> > + size_t len, loff_t *offp)
> > +{
> > + int dsc_bpp = 0;
> > + int ret;
> > + struct drm_connector *connector =
> > + ((struct seq_file *)file->private_data)->private;
> > + struct intel_encoder *encoder =
> intel_attached_encoder(to_intel_connector(connector));
> > + struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> > + struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> > +
> > + if (len == 0)
> > + return 0;
> > +
> > + drm_dbg(&i915->drm,
> > + "Copied %zu bytes from user to force BPP\n", len);
> > +
> > + ret = kstrtoint_from_user(ubuf, len, 0, &dsc_bpp);
> > +
> > + intel_dp->force_dsc_bpp = dsc_bpp;
> > + if (ret < 0)
> > + return ret;
> > +
> > + *offp += len;
> > + return len;
> > +}
> > +
> > +static int i915_dsc_bpp_support_open(struct inode *inode,
> > + struct file *file)
> > +{
> > + return single_open(file, i915_dsc_bpp_support_show,
> > + inode->i_private);
> > +}
> > +
> > +static const struct file_operations i915_dsc_bpp_support_fops = {
> > + .owner = THIS_MODULE,
> > + .open = i915_dsc_bpp_support_open,
> > + .read = seq_read,
> > + .llseek = seq_lseek,
> > + .release = single_release,
> > + .write = i915_dsc_bpp_support_write
> > +};
> > +
> > /**
> > * intel_connector_debugfs_add - add i915 specific connector debugfs files
> > * @connector: pointer to a registered drm_connector @@ -2427,9
> > +2521,16 @@ int intel_connector_debugfs_add(struct drm_connector
> *connector)
> > connector,
> &i915_hdcp_sink_capability_fops);
> > }
> >
> > - if ((DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) &&
> ((connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
> !to_intel_connector(connector)->mst_port) || connector->connector_type
> == DRM_MODE_CONNECTOR_eDP))
> > + if ((DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) &&
> > + ((connector->connector_type ==
> DRM_MODE_CONNECTOR_DisplayPort &&
> > + !to_intel_connector(connector)->mst_port) ||
> > + connector->connector_type == DRM_MODE_CONNECTOR_eDP))
> {
> > debugfs_create_file("i915_dsc_fec_support", S_IRUGO,
> root,
> > connector, &i915_dsc_fec_support_fops);
> > + debugfs_create_file("i915_dsc_bpp_support", 0444,
> > + root, connector,
> > + &i915_dsc_bpp_support_fops);
> > + }
> >
> > /* Legacy panels doesn't lpsp on any platform */
> > if ((DISPLAY_VER(dev_priv) >= 9 || IS_HASWELL(dev_priv) || diff
> > --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index 29ae1d9b5abc..00320d89d266 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -1627,6 +1627,7 @@ struct intel_dp {
> >
> > /* Display stream compression testing */
> > bool force_dsc_en;
> > + int force_dsc_bpp;
> >
> > bool hobl_failed;
> > bool hobl_active;
>
> --
> Jani Nikula, Intel Open Source Graphics Center
More information about the dri-devel
mailing list