[RFC PATCH 0/4] Allow to use DRM fbdev emulation layer with CONFIG_FB disabled

Daniel Vetter daniel at ffwll.ch
Fri Aug 27 20:20:10 UTC 2021


On Fri, Aug 27, 2021 at 07:50:23PM +0200, Thomas Zimmermann wrote:
> Hi
> 
> Am 27.08.21 um 12:00 schrieb Javier Martinez Canillas:
> > This patch series splits the fbdev core support in two different Kconfig
> > symbols: FB and FB_CORE. The motivation for this is to allow CONFIG_FB to
> > be disabled, while still using fbcon with the DRM fbdev emulation layer.
> 
> I'm skeptical. DRM's fbdev emulation is not just the console emulation, it's
> a full fbdev device. You can see the related device file as /dev/fb*.
> Providing the file while having CONFIG_FB disabled doesn't make much sense
> to me. I know it's not pretty, but it's consistent at least.
> 
> If you want to remove fbdev, you could try to untangle fbdev and the console
> emulation such that DRM can set up a console by itself. Old fbdev drives
> would also set up the console individually.

Yeah given the horrendous security track record of all that code, and the
maze of handover we have (stuff like flicker free boot and all that) I'm
wondering whether typing a new drmcon wouldn't be faster and a lot more
maintainable.

With drm_client this shouldn't be too much work at least for the drm code.

> Another low-hangling fruit is a config option to enable/disable the fbdev
> userspace interface (i.e., dev/fb*). Disabling the interface would remove
> the rsp mmap of the fbdev graphics buffer. We sometimes have to use an extra
> shadow buffer because mmap requires non-moving buffers. Without mmap we
> might be able to avoid some of the costly internal memcpys for some of our
> drivers.

And yeah stuff like that wouldn't be needed for drmcon either.
-Daniel

> 
> Best regards
> Thomas
> 
> > 
> > The reason for doing this is that now with simpledrm we could just boot
> > with simpledrm -> real DRM driver, without needing any legacy fbdev driver
> > (e.g: efifb or simplefb) even for the early console.
> > 
> > We want to do that in the Fedora kernel, but currently need to keep option
> > CONFIG_FB enabled and all fbdev drivers explicitly disabled, which makes
> > the configuration harder to maintain.
> > 
> > It is a RFC because I'm not that familiar with the fbdev core, but I have
> > tested and works with CONFIG_DRM_FBDEV_EMULATION=y and CONFIG_FB disabled.
> > This config automatically disables all the fbdev drivers that is our goal.
> > 
> > Patch 1/4 is just a clean up, patch 2/4 moves a couple of functions out of
> > fbsysfs.o, that are not related to sysfs attributes creation and finally
> > patch 3/4 makes the fbdev split that is mentioned above.
> > 
> > Patch 4/4 makes the DRM fbdev emulation depend on the new FB_CORE symbol
> > instead of FB. This could be done as a follow-up but for completeness is
> > also included in this series.
> > 
> > Best regards,
> > Javier
> > 
> > 
> > Javier Martinez Canillas (4):
> >    fbdev: Rename fb_*_device() functions names to match what they do
> >    fbdev: Move framebuffer_{alloc,release}() functions to fbmem.c
> >    fbdev: Split frame buffer support in FB and FB_CORE symbols
> >    drm: Make fbdev emulation depend on FB_CORE instead of FB
> > 
> >   arch/x86/Makefile                  |  2 +-
> >   arch/x86/video/Makefile            |  2 +-
> >   drivers/gpu/drm/Kconfig            |  2 +-
> >   drivers/video/console/Kconfig      |  2 +-
> >   drivers/video/fbdev/Kconfig        | 57 +++++++++++++---------
> >   drivers/video/fbdev/core/Makefile  | 13 +++--
> >   drivers/video/fbdev/core/fbmem.c   | 73 ++++++++++++++++++++++++++--
> >   drivers/video/fbdev/core/fbsysfs.c | 77 +-----------------------------
> >   include/linux/fb.h                 | 18 ++++++-
> >   9 files changed, 134 insertions(+), 112 deletions(-)
> > 
> 
> -- 
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Maxfeldstr. 5, 90409 Nürnberg, Germany
> (HRB 36809, AG Nürnberg)
> Geschäftsführer: Felix Imendörffer
> 




-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


More information about the dri-devel mailing list