[Freedreno] [PATCH 2/2] drm/msm/hdmi: switch to drm_bridge_connector

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Mon Dec 6 22:47:21 UTC 2021


On Mon, 6 Dec 2021 at 23:42, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>
>
>
> On 11/25/2021 4:50 AM, Dmitry Baryshkov wrote:
> > On 19/10/2021 02:54, abhinavk at codeaurora.org wrote:
> >> On 2021-10-16 07:21, Dmitry Baryshkov wrote:
> >>> On Sat, 16 Oct 2021 at 01:25, <abhinavk at codeaurora.org> wrote:
> >>>>
> >>>> Hi Dmitry
> >>>>
> >>>> On 2021-10-14 17:11, Dmitry Baryshkov wrote:
> >>>> > Merge old hdmi_bridge and hdmi_connector implementations. Use
> >>>> > drm_bridge_connector instead.
> >>>> >
> >>>> Can you please comment on the validation done on this change?
> >>>> Has basic bootup been verified on db820c as thats the only platform
> >>>> which shall use this.
> >>>
> >>> Yes, this has been developed and validated on db820c
> >> Thanks for confirming.
> >>>
> >>>>
> >>>> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> >>>> > ---
> >>>> >  drivers/gpu/drm/msm/Makefile                  |   2 +-
> >>>> >  drivers/gpu/drm/msm/hdmi/hdmi.c               |  12 +-
> >>>> >  drivers/gpu/drm/msm/hdmi/hdmi.h               |  19 ++-
> >>>> >  drivers/gpu/drm/msm/hdmi/hdmi_bridge.c        |  81 ++++++++-
> >>>> >  .../msm/hdmi/{hdmi_connector.c => hdmi_hpd.c} | 154
> >>>> ++----------------
> >>>> >  5 files changed, 109 insertions(+), 159 deletions(-)
> >>>> >  rename drivers/gpu/drm/msm/hdmi/{hdmi_connector.c => hdmi_hpd.c}
> >>>> (62%)
> >>>> >
> >>>> > diff --git a/drivers/gpu/drm/msm/Makefile
> >>>> > b/drivers/gpu/drm/msm/Makefile
> >>>> > index 904535eda0c4..91b09cda8a9c 100644
> >>>> > --- a/drivers/gpu/drm/msm/Makefile
> >>>> > +++ b/drivers/gpu/drm/msm/Makefile
> >>>> > @@ -19,7 +19,7 @@ msm-y := \
> >>>> >       hdmi/hdmi.o \
> >>>> >       hdmi/hdmi_audio.o \
> >>>> >       hdmi/hdmi_bridge.o \
> >>>> > -     hdmi/hdmi_connector.o \
> >>>> > +     hdmi/hdmi_hpd.o \
> >>>> >       hdmi/hdmi_i2c.o \
> >>>> >       hdmi/hdmi_phy.o \
> >>>> >       hdmi/hdmi_phy_8960.o \
> >>>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c
> >>>> > b/drivers/gpu/drm/msm/hdmi/hdmi.c
> >>>> > index db17a000d968..d1cf4df7188c 100644
> >>>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi.c
> >>>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c
> >>>> > @@ -8,6 +8,8 @@
> >>>> >  #include <linux/of_irq.h>
> >>>> >  #include <linux/of_gpio.h>
> >>>> >
> >>>> > +#include <drm/drm_bridge_connector.h>
> >>>> > +
> >>>> >  #include <sound/hdmi-codec.h>
> >>>> >  #include "hdmi.h"
> >>>> >
> >>>> > @@ -41,7 +43,7 @@ static irqreturn_t msm_hdmi_irq(int irq, void
> >>>> > *dev_id)
> >>>> >       struct hdmi *hdmi = dev_id;
> >>>> >
> >>>> >       /* Process HPD: */
> >>>> > -     msm_hdmi_connector_irq(hdmi->connector);
> >>>> > +     msm_hdmi_hpd_irq(hdmi->bridge);
> >>>> >
> >>>> >       /* Process DDC: */
> >>>> >       msm_hdmi_i2c_irq(hdmi->i2c);
> >>>> > @@ -283,7 +285,7 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
> >>>> >               goto fail;
> >>>> >       }
> >>>> >
> >>>> > -     hdmi->connector = msm_hdmi_connector_init(hdmi);
> >>>> > +     hdmi->connector = drm_bridge_connector_init(hdmi->dev,
> >>>> encoder);
> >>>> >       if (IS_ERR(hdmi->connector)) {
> >>>> >               ret = PTR_ERR(hdmi->connector);
> >>>> >               DRM_DEV_ERROR(dev->dev, "failed to create HDMI
> >>>> connector: %d\n",
> >>>> > ret);
> >>>> > @@ -291,6 +293,8 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
> >>>> >               goto fail;
> >>>> >       }
> >>>> >
> >>>> > +     drm_connector_attach_encoder(hdmi->connector, hdmi->encoder);
> >>>> > +
> >>>> >       hdmi->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
> >>>> >       if (hdmi->irq < 0) {
> >>>> >               ret = hdmi->irq;
> >>>> > @@ -307,7 +311,9 @@ int msm_hdmi_modeset_init(struct hdmi *hdmi,
> >>>> >               goto fail;
> >>>> >       }
> >>>> >
> >>>> > -     ret = msm_hdmi_hpd_enable(hdmi->connector);
> >>>> > +     drm_bridge_connector_enable_hpd(hdmi->connector);
> >>>> > +
> >>>> > +     ret = msm_hdmi_hpd_enable(hdmi->bridge);
> >>>> >       if (ret < 0) {
> >>>> >               DRM_DEV_ERROR(&hdmi->pdev->dev, "failed to enable
> >>>> HPD: %d\n", ret);
> >>>> >               goto fail;
> >>>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h
> >>>> > b/drivers/gpu/drm/msm/hdmi/hdmi.h
> >>>> > index 82261078c6b1..736f348befb3 100644
> >>>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi.h
> >>>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
> >>>> > @@ -114,6 +114,13 @@ struct hdmi_platform_config {
> >>>> >       struct hdmi_gpio_data gpios[HDMI_MAX_NUM_GPIO];
> >>>> >  };
> >>>> >
> >>>> > +struct hdmi_bridge {
> >>>> > +     struct drm_bridge base;
> >>>> > +     struct hdmi *hdmi;
> >>>> > +     struct work_struct hpd_work;
> >>>> > +};
> >>>> > +#define to_hdmi_bridge(x) container_of(x, struct hdmi_bridge, base)
> >>>> > +
> >>>> >  void msm_hdmi_set_mode(struct hdmi *hdmi, bool power_on);
> >>>> >
> >>>> >  static inline void hdmi_write(struct hdmi *hdmi, u32 reg, u32 data)
> >>>> > @@ -230,13 +237,11 @@ void msm_hdmi_audio_set_sample_rate(struct hdmi
> >>>> > *hdmi, int rate);
> >>>> >  struct drm_bridge *msm_hdmi_bridge_init(struct hdmi *hdmi);
> >>>> >  void msm_hdmi_bridge_destroy(struct drm_bridge *bridge);
> >>>> >
> >>>> > -/*
> >>>> > - * hdmi connector:
> >>>> > - */
> >>>> > -
> >>>> > -void msm_hdmi_connector_irq(struct drm_connector *connector);
> >>>> > -struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi);
> >>>> > -int msm_hdmi_hpd_enable(struct drm_connector *connector);
> >>>> > +void msm_hdmi_hpd_irq(struct drm_bridge *bridge);
> >>>> > +enum drm_connector_status msm_hdmi_bridge_detect(
> >>>> > +             struct drm_bridge *bridge);
> >>>> > +int msm_hdmi_hpd_enable(struct drm_bridge *bridge);
> >>>> > +void msm_hdmi_hpd_disable(struct hdmi_bridge *hdmi_bridge);
> >>>> >
> >>>> >  /*
> >>>> >   * i2c adapter for ddc:
> >>>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
> >>>> > b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
> >>>> > index f04eb4a70f0d..211b73dddf65 100644
> >>>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
> >>>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi_bridge.c
> >>>> > @@ -5,17 +5,16 @@
> >>>> >   */
> >>>> >
> >>>> >  #include <linux/delay.h>
> >>>> > +#include <drm/drm_bridge_connector.h>
> >>>> >
> >>>> > +#include "msm_kms.h"
> >>>> >  #include "hdmi.h"
> >>>> >
> >>>> > -struct hdmi_bridge {
> >>>> > -     struct drm_bridge base;
> >>>> > -     struct hdmi *hdmi;
> >>>> > -};
> >>>> > -#define to_hdmi_bridge(x) container_of(x, struct hdmi_bridge, base)
> >>>> > -
> >>>> >  void msm_hdmi_bridge_destroy(struct drm_bridge *bridge)
> >>>> >  {
> >>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
> >>>> > +
> >>>> > +     msm_hdmi_hpd_disable(hdmi_bridge);
> >>>> >  }
> >>>> >
> >>>> >  static void msm_hdmi_power_on(struct drm_bridge *bridge)
> >>>> > @@ -251,14 +250,76 @@ static void msm_hdmi_bridge_mode_set(struct
> >>>> > drm_bridge *bridge,
> >>>> >               msm_hdmi_audio_update(hdmi);
> >>>> >  }
> >>>> >
> >>>> > +static struct edid *msm_hdmi_bridge_get_edid(struct drm_bridge
> >>>> > *bridge,
> >>>> > +             struct drm_connector *connector)
> >>>> > +{
> >>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
> >>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
> >>>> > +     struct edid *edid;
> >>>> > +     uint32_t hdmi_ctrl;
> >>>> > +
> >>>> > +     hdmi_ctrl = hdmi_read(hdmi, REG_HDMI_CTRL);
> >>>> > +     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl | HDMI_CTRL_ENABLE);
> >>>> > +
> >>>> > +     edid = drm_get_edid(connector, hdmi->i2c);
> >>>> > +
> >>>> > +     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl);
> >>>> > +
> >>>> > +     hdmi->hdmi_mode = drm_detect_hdmi_monitor(edid);
> >>>> > +
> >>>> > +     return edid;
> >>>> > +}
> >>>> > +
> >>>> > +static enum drm_mode_status msm_hdmi_bridge_mode_valid(struct
> >>>> > drm_bridge *bridge,
> >>>> > +             const struct drm_display_info *info,
> >>>> > +             const struct drm_display_mode *mode)
> >>>> > +{
> >>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
> >>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
> >>>> > +     const struct hdmi_platform_config *config = hdmi->config;
> >>>> > +     struct msm_drm_private *priv = bridge->dev->dev_private;
> >>>> > +     struct msm_kms *kms = priv->kms;
> >>>> > +     long actual, requested;
> >>>> > +
> >>>> > +     requested = 1000 * mode->clock;
> >>>> > +     actual = kms->funcs->round_pixclk(kms,
> >>>> > +                     requested, hdmi_bridge->hdmi->encoder);
> >>>> > +
> >>>> > +     /* for mdp5/apq8074, we manage our own pixel clk (as opposed to
> >>>> > +      * mdp4/dtv stuff where pixel clk is assigned to mdp/encoder
> >>>> > +      * instead):
> >>>> > +      */
> >>>> > +     if (config->pwr_clk_cnt > 0)
> >>>> > +             actual = clk_round_rate(hdmi->pwr_clks[0], actual);
> >>>> > +
> >>>> > +     DBG("requested=%ld, actual=%ld", requested, actual);
> >>>> > +
> >>>> > +     if (actual != requested)
> >>>> > +             return MODE_CLOCK_RANGE;
> >>>> > +
> >>>> > +     return 0;
> >>>> > +}
> >>>> > +
> >>>> >  static const struct drm_bridge_funcs msm_hdmi_bridge_funcs = {
> >>>> >               .pre_enable = msm_hdmi_bridge_pre_enable,
> >>>> >               .enable = msm_hdmi_bridge_enable,
> >>>> >               .disable = msm_hdmi_bridge_disable,
> >>>> >               .post_disable = msm_hdmi_bridge_post_disable,
> >>>> >               .mode_set = msm_hdmi_bridge_mode_set,
> >>>> > +             .mode_valid = msm_hdmi_bridge_mode_valid,
> >>>> > +             .get_edid = msm_hdmi_bridge_get_edid,
> >>>> > +             .detect = msm_hdmi_bridge_detect,
> >>>> >  };
> >>>> >
> >>>> > +static void
> >>>> > +msm_hdmi_hotplug_work(struct work_struct *work)
> >>>> > +{
> >>>> > +     struct hdmi_bridge *hdmi_bridge =
> >>>> > +             container_of(work, struct hdmi_bridge, hpd_work);
> >>>> > +     struct drm_bridge *bridge = &hdmi_bridge->base;
> >>>> > +
> >>>> > +     drm_bridge_hpd_notify(bridge, drm_bridge_detect(bridge));
> >>>> > +}
> >>>> >
> >>>> >  /* initialize bridge */
> >>>> >  struct drm_bridge *msm_hdmi_bridge_init(struct hdmi *hdmi)
> >>>> > @@ -275,11 +336,17 @@ struct drm_bridge *msm_hdmi_bridge_init(struct
> >>>> > hdmi *hdmi)
> >>>> >       }
> >>>> >
> >>>> >       hdmi_bridge->hdmi = hdmi;
> >>>> > +     INIT_WORK(&hdmi_bridge->hpd_work, msm_hdmi_hotplug_work);
> >>>> >
> >>>> >       bridge = &hdmi_bridge->base;
> >>>> >       bridge->funcs = &msm_hdmi_bridge_funcs;
> >>>> > +     bridge->ddc = hdmi->i2c;
> >>>> > +     bridge->type = DRM_MODE_CONNECTOR_HDMIA;
> >>>> > +     bridge->ops = DRM_BRIDGE_OP_HPD |
> >>>> > +             DRM_BRIDGE_OP_DETECT |
> >>>> > +             DRM_BRIDGE_OP_EDID;
> >> Please correct me if wrong here. When we set DRM_BRIDGE_OP_HPD, it
> >> means we need to
> >> set the hpd_enable and hpd_disable callbacks. I am not seeing those
> >> being set.
> >>
> >> 707      * @DRM_BRIDGE_OP_HPD: The bridge can detect hot-plug and
> >> hot-unplug
> >> 708      * without requiring polling. Bridges that set this flag shall
> >> 709      * implement the &drm_bridge_funcs->hpd_enable and
> >> 710      * &drm_bridge_funcs->hpd_disable callbacks if they support
> >> enabling
> >> 711      * and disabling hot-plug detection dynamically.
> >> 712      */
> >> 713     DRM_BRIDGE_OP_HPD = BIT(2),
> >>
> >> So when drm_bridge_connector_enable_hpd() is called, its a no-op as
> >> hpd_enable() callback
> >> is not set.
> >>
> >> msm_hdmi_hpd_enable() actually enables the HPD logic which is getting
> >> called from msm_hdmi_modeset_init()
> >> and not from hpd_enable().
> >>
> >> In that case, do we need to set DRM_BRIDGE_OP_HPD for this? If we
> >> dont, what will happen?
> >>
> >
> > Without this flag, the drm_bridge_connector will not know that this
> > bridge is capable of generating HPD events on its own, ending up with
> > polling implementation. See drm_bridge_connector_init(),
> > drm_helper_hpd_irq_event(), etc.
> >
>
> Thanks for the details. Then, as per the documentation on the
> DRM_BRIDGE_OP_HPD, shouldnt we also assign msm_hdmi_hpd_enable to
> hpd_enable callback? Since we are already calling
> drm_bridge_connector_enable_hpd(), that should take care of calling it
> using the callback then.
>
> Similarly, you can assign msm_hdmi_hpd_disable to hpd_disable op and
> then call drm_bridge_connector_disable_hpd() in those places.

Since that would be a change in the functionality, I'd prefer to have
that in a separate patch.
It looks like a nice cleanup idea, so I'd implement that at some point.

>
> That way, functionality remains intact and we follow the documentation.
>
> >>
> >>
> >>>> >
> >>>> > -     ret = drm_bridge_attach(hdmi->encoder, bridge, NULL, 0);
> >>>> > +     ret = drm_bridge_attach(hdmi->encoder, bridge, NULL,
> >>>> > DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> >>>> >       if (ret)
> >>>> >               goto fail;
> >>>> >
> >>>> > diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
> >>>> > b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
> >>>> > similarity index 62%
> >>>> > rename from drivers/gpu/drm/msm/hdmi/hdmi_connector.c
> >>>> > rename to drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
> >>>> > index a7f729cdec7b..1cda7bf23b3b 100644
> >>>> > --- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c
> >>>> > +++ b/drivers/gpu/drm/msm/hdmi/hdmi_hpd.c
> >>>> > @@ -11,13 +11,6 @@
> >>>> >  #include "msm_kms.h"
> >>>> >  #include "hdmi.h"
> >>>> >
> >>>> > -struct hdmi_connector {
> >>>> > -     struct drm_connector base;
> >>>> > -     struct hdmi *hdmi;
> >>>> > -     struct work_struct hpd_work;
> >>>> > -};
> >>>> > -#define to_hdmi_connector(x) container_of(x, struct hdmi_connector,
> >>>> > base)
> >>>> > -
> >>>> >  static void msm_hdmi_phy_reset(struct hdmi *hdmi)
> >>>> >  {
> >>>> >       unsigned int val;
> >>>> > @@ -139,10 +132,10 @@ static void enable_hpd_clocks(struct hdmi
> >>>> *hdmi,
> >>>> > bool enable)
> >>>> >       }
> >>>> >  }
> >>>> >
> >>>> > -int msm_hdmi_hpd_enable(struct drm_connector *connector)
> >>>> > +int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
> >>>> >  {
> >>>> > -     struct hdmi_connector *hdmi_connector =
> >>>> to_hdmi_connector(connector);
> >>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
> >>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
> >>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
> >>>> >       const struct hdmi_platform_config *config = hdmi->config;
> >>>> >       struct device *dev = &hdmi->pdev->dev;
> >>>> >       uint32_t hpd_ctrl;
> >>>> > @@ -199,9 +192,9 @@ int msm_hdmi_hpd_enable(struct drm_connector
> >>>> > *connector)
> >>>> >       return ret;
> >>>> >  }
> >>>> >
> >>>> > -static void hdp_disable(struct hdmi_connector *hdmi_connector)
> >>>> > +void msm_hdmi_hpd_disable(struct hdmi_bridge *hdmi_bridge)
> >>>> >  {
> >>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
> >>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
> >>>> >       const struct hdmi_platform_config *config = hdmi->config;
> >>>> >       struct device *dev = &hdmi->pdev->dev;
> >>>> >       int ret;
> >>>> > @@ -227,19 +220,10 @@ static void hdp_disable(struct hdmi_connector
> >>>> > *hdmi_connector)
> >>>> >               dev_warn(dev, "failed to disable hpd regulator:
> >>>> %d\n", ret);
> >>>> >  }
> >>>> >
> >>>> > -static void
> >>>> > -msm_hdmi_hotplug_work(struct work_struct *work)
> >>>> > -{
> >>>> > -     struct hdmi_connector *hdmi_connector =
> >>>> > -             container_of(work, struct hdmi_connector, hpd_work);
> >>>> > -     struct drm_connector *connector = &hdmi_connector->base;
> >>>> > -     drm_helper_hpd_irq_event(connector->dev);
> >>>> > -}
> >>>> > -
> >>>> > -void msm_hdmi_connector_irq(struct drm_connector *connector)
> >>>> > +void msm_hdmi_hpd_irq(struct drm_bridge *bridge)
> >>>> >  {
> >>>> > -     struct hdmi_connector *hdmi_connector =
> >>>> to_hdmi_connector(connector);
> >>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
> >>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
> >>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
> >>>> >       uint32_t hpd_int_status, hpd_int_ctrl;
> >>>> >
> >>>> >       /* Process HPD: */
> >>>> > @@ -262,7 +246,7 @@ void msm_hdmi_connector_irq(struct drm_connector
> >>>> > *connector)
> >>>> >                       hpd_int_ctrl |= HDMI_HPD_INT_CTRL_INT_CONNECT;
> >>>> >               hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL, hpd_int_ctrl);
> >>>> >
> >>>> > -             queue_work(hdmi->workq, &hdmi_connector->hpd_work);
> >>>> > +             queue_work(hdmi->workq, &hdmi_bridge->hpd_work);
> >>>> >       }
> >>>> >  }
> >>>> >
> >>>> > @@ -293,11 +277,11 @@ static enum drm_connector_status
> >>>> > detect_gpio(struct hdmi *hdmi)
> >>>> >                       connector_status_disconnected;
> >>>> >  }
> >>>> >
> >>>> > -static enum drm_connector_status hdmi_connector_detect(
> >>>> > -             struct drm_connector *connector, bool force)
> >>>> > +enum drm_connector_status msm_hdmi_bridge_detect(
> >>>> > +             struct drm_bridge *bridge)
> >>>> >  {
> >>>> > -     struct hdmi_connector *hdmi_connector =
> >>>> to_hdmi_connector(connector);
> >>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
> >>>> > +     struct hdmi_bridge *hdmi_bridge = to_hdmi_bridge(bridge);
> >>>> > +     struct hdmi *hdmi = hdmi_bridge->hdmi;
> >>>> >       const struct hdmi_platform_config *config = hdmi->config;
> >>>> >       struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];
> >>>> >       enum drm_connector_status stat_gpio, stat_reg;
> >>>> > @@ -331,115 +315,3 @@ static enum drm_connector_status
> >>>> > hdmi_connector_detect(
> >>>> >
> >>>> >       return stat_gpio;
> >>>> >  }
> >>>> > -
> >>>> > -static void hdmi_connector_destroy(struct drm_connector *connector)
> >>>> > -{
> >>>> > -     struct hdmi_connector *hdmi_connector =
> >>>> to_hdmi_connector(connector);
> >>>> > -
> >>>> > -     hdp_disable(hdmi_connector);
> >>>> > -
> >>>> > -     drm_connector_cleanup(connector);
> >>>> > -
> >>>> > -     kfree(hdmi_connector);
> >>>> > -}
> >>>> > -
> >>>> > -static int msm_hdmi_connector_get_modes(struct drm_connector
> >>>> > *connector)
> >>>> > -{
> >>>> > -     struct hdmi_connector *hdmi_connector =
> >>>> to_hdmi_connector(connector);
> >>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
> >>>> > -     struct edid *edid;
> >>>> > -     uint32_t hdmi_ctrl;
> >>>> > -     int ret = 0;
> >>>> > -
> >>>> > -     hdmi_ctrl = hdmi_read(hdmi, REG_HDMI_CTRL);
> >>>> > -     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl | HDMI_CTRL_ENABLE);
> >>>> > -
> >>>> > -     edid = drm_get_edid(connector, hdmi->i2c);
> >>>> > -
> >>>> > -     hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl);
> >>>> > -
> >>>> > -     hdmi->hdmi_mode = drm_detect_hdmi_monitor(edid);
> >>>> > -     drm_connector_update_edid_property(connector, edid);
> >>>> > -
> >>>> > -     if (edid) {
> >>>> > -             ret = drm_add_edid_modes(connector, edid);
> >>>> > -             kfree(edid);
> >>>> > -     }
> >>>> > -
> >>>> > -     return ret;
> >>>> > -}
> >>>> > -
> >>>> > -static int msm_hdmi_connector_mode_valid(struct drm_connector
> >>>> > *connector,
> >>>> > -                              struct drm_display_mode *mode)
> >>>> > -{
> >>>> > -     struct hdmi_connector *hdmi_connector =
> >>>> to_hdmi_connector(connector);
> >>>> > -     struct hdmi *hdmi = hdmi_connector->hdmi;
> >>>> > -     const struct hdmi_platform_config *config = hdmi->config;
> >>>> > -     struct msm_drm_private *priv = connector->dev->dev_private;
> >>>> > -     struct msm_kms *kms = priv->kms;
> >>>> > -     long actual, requested;
> >>>> > -
> >>>> > -     requested = 1000 * mode->clock;
> >>>> > -     actual = kms->funcs->round_pixclk(kms,
> >>>> > -                     requested, hdmi_connector->hdmi->encoder);
> >>>> > -
> >>>> > -     /* for mdp5/apq8074, we manage our own pixel clk (as opposed to
> >>>> > -      * mdp4/dtv stuff where pixel clk is assigned to mdp/encoder
> >>>> > -      * instead):
> >>>> > -      */
> >>>> > -     if (config->pwr_clk_cnt > 0)
> >>>> > -             actual = clk_round_rate(hdmi->pwr_clks[0], actual);
> >>>> > -
> >>>> > -     DBG("requested=%ld, actual=%ld", requested, actual);
> >>>> > -
> >>>> > -     if (actual != requested)
> >>>> > -             return MODE_CLOCK_RANGE;
> >>>> > -
> >>>> > -     return 0;
> >>>> > -}
> >>>> > -
> >>>> > -static const struct drm_connector_funcs hdmi_connector_funcs = {
> >>>> > -     .detect = hdmi_connector_detect,
> >>>> > -     .fill_modes = drm_helper_probe_single_connector_modes,
> >>>> > -     .destroy = hdmi_connector_destroy,
> >>>> > -     .reset = drm_atomic_helper_connector_reset,
> >>>> > -     .atomic_duplicate_state =
> >>>> > drm_atomic_helper_connector_duplicate_state,
> >>>> > -     .atomic_destroy_state =
> >>>> drm_atomic_helper_connector_destroy_state,
> >>>> > -};
> >>>> > -
> >>>> > -static const struct drm_connector_helper_funcs
> >>>> > msm_hdmi_connector_helper_funcs = {
> >>>> > -     .get_modes = msm_hdmi_connector_get_modes,
> >>>> > -     .mode_valid = msm_hdmi_connector_mode_valid,
> >>>> > -};
> >>>> > -
> >>>> > -/* initialize connector */
> >>>> > -struct drm_connector *msm_hdmi_connector_init(struct hdmi *hdmi)
> >>>> > -{
> >>>> > -     struct drm_connector *connector = NULL;
> >>>> > -     struct hdmi_connector *hdmi_connector;
> >>>> > -
> >>>> > -     hdmi_connector = kzalloc(sizeof(*hdmi_connector), GFP_KERNEL);
> >>>> > -     if (!hdmi_connector)
> >>>> > -             return ERR_PTR(-ENOMEM);
> >>>> > -
> >>>> > -     hdmi_connector->hdmi = hdmi;
> >>>> > -     INIT_WORK(&hdmi_connector->hpd_work, msm_hdmi_hotplug_work);
> >>>> > -
> >>>> > -     connector = &hdmi_connector->base;
> >>>> > -
> >>>> > -     drm_connector_init_with_ddc(hdmi->dev, connector,
> >>>> > -                                 &hdmi_connector_funcs,
> >>>> > -                                 DRM_MODE_CONNECTOR_HDMIA,
> >>>> > -                                 hdmi->i2c);
> >>>> > -     drm_connector_helper_add(connector,
> >>>> > &msm_hdmi_connector_helper_funcs);
> >>>> > -
> >>>> > -     connector->polled = DRM_CONNECTOR_POLL_CONNECT |
> >>>> > -                     DRM_CONNECTOR_POLL_DISCONNECT;
> >>>> > -
> >>>> > -     connector->interlace_allowed = 0;
> >>>> > -     connector->doublescan_allowed = 0;
> >>>> > -
> >>>> > -     drm_connector_attach_encoder(connector, hdmi->encoder);
> >>>> > -
> >>>> > -     return connector;
> >>>> > -}
> >
> >



-- 
With best wishes
Dmitry


More information about the dri-devel mailing list